DATOUBOSS DT-12V100AH

DATOUBOSS 12V 100Ah LiFePO4 Battery Group 24

Model: DT-12V100AH

1. 서론

This manual provides essential information for the safe and efficient use of your DATOUBOSS 12V 100Ah LiFePO4 Battery Group 24. Please read this manual thoroughly before installation and operation to ensure proper handling and to maximize the battery's lifespan and performance.

DATOUBOSS 12V 100Ah LiFePO4 Battery with safety features highlighted

Image 1.1: DATOUBOSS 12V 100Ah LiFePO4 Battery with integrated safety features, including 4000+ cycles, 10+ years lifespan, and 100A BMS protection.

2. 안전 정보

Adherence to the following safety guidelines is crucial to prevent injury, damage to the battery, and ensure long-term performance.

  • 배터리의 양극과 음극을 바꾸어 연결하지 마십시오.
  • Avoid hitting or throwing objects at the battery, or stepping on it.
  • Do not use metal to directly connect the positive and negative terminals of the battery.
  • Do not weld the battery directly or pierce it with nails or other sharp objects.
  • Do not immerse the battery in seawater or water.
  • This battery is not designed for use as a car starter battery, trip starter battery, or engine starter battery.
  • Avoid using the battery at high temperatures, as this may lead to overheating, fire, or premature failure, shortening its service life.
Warnings for DATOUBOSS LiFePO4 battery usage

Image 2.1: Visual representation of critical safety warnings for the LiFePO4 battery.

3. 제품 특징

The DATOUBOSS 12V 100Ah LiFePO4 Battery offers advanced features for reliable power solutions:

  • 통합 BMS 보호: Features a built-in 100A Battery Management System (BMS) for protection against short-circuits, over-voltage, over-heating, and over-charging.
  • 연장된 수명: Designed for 4,000 to 15,000 deep cycles, providing a service life of up to 10 years.
  • 온도 회복력: Operates effectively across a wide temperature range, from -4°F to 150°F, ensuring performance in various environments.
  • 높은 에너지 밀도: Offers higher energy density compared to traditional lead-acid batteries.
  • 가벼운 디자인: Significantly lighter than comparable lead-acid batteries, enhancing portability and ease of installation.
DATOUBOSS LiFePO4 battery operating in extreme temperatures

Image 3.1: The battery's ability to adapt to extreme temperatures, from -4°F (low) to 150°F (high).

DATOUBOSS LiFePO4 battery powering various appliances in an RV setting

Image 3.2: Illustration of the battery's capacity to power common RV appliances like fans, refrigerators, coffee makers, and microwaves for extended durations.

4. 설정

4.1 초기 검사

Upon receiving your battery, inspect it for any visible damage. Ensure all terminals are secure. If any damage is found, contact customer support immediately.

4.2 연결 지침

The DATOUBOSS 12V 100Ah LiFePO4 battery supports both series and parallel connections for increased capacity and voltage. Always ensure all batteries in a series or parallel bank are of the same model and capacity.

  • 병렬 연결: Connect positive terminals together and negative terminals together to increase total amperage (Ah) while maintaining 12V.
  • 직렬 연결: Connect the positive terminal of one battery to the negative terminal of the next to increase total voltage (V). For example, two 12V batteries in series create a 24V system.
  • Maximum Configuration: The battery supports configurations up to 4 series and 4 parallel (4S4P), allowing for a maximum continuous charge/discharge current of 400A and a maximum load power of 20.48 kW.
Diagram showing flexible capacity expansion with series and parallel connections for DATOUBOSS LiFePO4 batteries

Image 4.1: Diagram illustrating how to connect multiple batteries in series and parallel for flexible capacity expansion in a solar power system.

5. 사용 설명서

5.1 배터리 충전

The DATOUBOSS LiFePO4 battery can be charged using various methods:

  • 태양광 패널: Connect to a compatible solar charge controller (MPPT recommended) and solar panels.
  • LiFePO4 Battery Charger: Use a dedicated LiFePO4 battery charger. Ensure the charger's voltage와 전류 설정은 12V LiFePO4 배터리에 적합합니다.
  • 발전기: Connect to a generator with a suitable charging output.
Three ways to charge DATOUBOSS LiFePO4 battery: solar panel, battery charger, and generator

Image 5.1: Visual guide to the three primary charging methods for the LiFePO4 battery.

5.2 응용 프로그램

이 배터리는 다음과 같은 다양한 용도에 적합합니다.

  • 레크리에이션 차량(RV)
  • Camping and Outdoor Power
  • Solar Power Systems (Off-Grid and Home Storage)
  • Marine Applications (Boats, Trolling Motors, Fish Finders)
  • 백업 전원 시스템
  • Power Carts and Kayaks
Various applications for DATOUBOSS LiFePO4 battery including camping, trolling motor, RV, solar system, and fish finder

이미지 5.2: Examples of diverse applications where the LiFePO4 battery can be utilized.

6. 유지관리

LiFePO4 batteries require minimal maintenance compared to lead-acid batteries. Follow these guidelines for optimal performance:

  • 정기 검사: Periodically check battery terminals for corrosion or loose connections. Clean terminals with a wire brush if necessary and ensure they are tightened.
  • 저장: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place. Avoid storing in direct sunlight or extreme temperatures.
  • 청소: 배터리를 보관하세요asing clean and free of dust and debris. Use a dry cloth for cleaning. Do not use solvents or harsh chemicals.
  • 심부방전을 피하세요: While LiFePO4 batteries tolerate deep discharge, it is recommended to avoid consistently discharging below 20% to prolong overall lifespan.

7. 문제 해결

If you encounter issues with your DATOUBOSS LiFePO4 battery, consider the following common troubleshooting steps:

  • 배터리가 충전되지 않음:
    • Verify that the charger is compatible with LiFePO4 batteries and is properly connected.
    • Check all cable connections for looseness or corrosion.
    • Ensure the charging temperature is within the recommended range (typically above 32°F / 0°C). The built-in BMS includes low-temperature protection to prevent charging below 0°C.
  • 전원 출력 없음:
    • 배터리가 충분히 충전되었는지 확인하세요.
    • Inspect all connections to the load for proper contact.
    • The BMS may have activated a protection mode (e.g., over-discharge, over-current). Disconnect the load, wait a few minutes, and attempt to reconnect.
  • 용량 감소:
    • Ensure the battery has been fully charged and discharged a few times to allow the BMS to balance the cells.
    • Verify that the load is not exceeding the battery's continuous discharge current rating.

If these steps do not resolve the issue, please contact DATOUBOSS customer support.

8. 사양

사양
상표다투보스
모델 번호DT-12V100AH
권tage12.8볼트(DC)
용량100아아
배터리 유형LiFePO4(인산철리튬)
비엠에스Built-in 100A BMS with Low-Temp Protection
사이클 수명4000-15000 사이클
예상 수명최대 10년
Series/Parallel SupportUp to 4S4P (4 series, 4 parallel)
최대. 연속 충전/방전 전류400A (in 4S4P configuration)
최대 부하 전력20.48 kW (in 4S4P configuration)
인증UL2054 Safety Certified
포함된 구성 요소12V 100Ah LiFePO4 리튬 배터리

9. 보증 및 지원

9.1 보증 정보

The DATOUBOSS 12V 100Ah LiFePO4 Battery comes with a 5년 보증이 보증은 정상적인 사용 및 서비스 조건 하에서의 재료 및 제조상의 결함에 적용됩니다.

9.2 고객 지원

문의사항, 기술 지원 또는 보증 청구 사항이 있으시면 당사 고객 지원팀에 문의해 주세요.

  • 온라인 서비스: 24-hour online support is available to answer your inquiries promptly.
  • 기술 지침: Our professional technical support team provides timely and efficient guidance for problem resolution.

Even if an item is marked as 'not returnable' on the platform, please reach out to us directly for assistance with defects, damage, or usage concerns. We are committed to providing solutions, including free return and replacement services to ensure your satisfaction.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.