소개
This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER YDM003 Single Pole Digital Dimmer Switch. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
안전 정보
- 경고: 화재, 감전 또는 사망을 방지하려면 회로 차단기나 퓨즈 박스에서 전원을 끄고 배선을 하기 전에 전원이 꺼져 있는지 테스트하세요.
- 설치는 자격을 갖춘 전기 기술자가 수행하거나 해당 지역의 전기 규정에 따라 수행해야 합니다.
- This dimmer switch is for single-pole applications only. Do not use in 3-way or 4-way circuits.
- A neutral wire is REQUIRED for this device to function. Ensure your electrical box has a neutral wire (usually white) before installation.
- Do not use with smart bulbs.
- 최대 와트를 초과하지 마십시오tage ratings: 150W for dimmable LED/CFL bulbs, 300W for incandescent/halogen bulbs.
상자 안에 무엇이 들어있나요?
- 1 x ECOELER YDM003 Digital Dimmer Light Switch
- 1 x 월 플레이트
- 설치 지침
- 장착 나사
설정 및 설치
- 전원 끄기: Before starting, ensure power is OFF at the circuit breaker or fuse box to prevent electrical shock.
- 배선 확인:
Confirm that your electrical box contains a neutral wire (typically white). This dimmer requires a neutral wire for proper operation. Identify the Hot (Line), Load, Ground, and Neutral wires.
Image: Wiring diagram for the ECOELER dimmer switch, illustrating connections for Hot (black), Load (red), Ground (green), and Neutral (white) wires. The diagram emphasizes that a neutral wire is required.
- 와이어 연결:
- 연결하다 Hot (Line) wire from the wall box to the dimmer's black wire.
- 연결하다 짐 wire (to the light fixture) from the wall box to the dimmer's red wire.
- 연결하다 지면 wire from the wall box to the dimmer's green wire.
- 연결하다 중립적 wire from the wall box to the dimmer's white wire.
- 모든 연결부를 와이어 너트로 고정하세요.
Image: A detailed diagram showing the ECOELER dimmer switch connected to a single-pole circuit. It clearly labels the Hot (black), Load (red), Ground (green), and Neutral (white) wires, emphasizing the neutral wire requirement.
- 디머 장착: Carefully fold the wires and push the dimmer into the wall box. Secure it with the provided screws.
- 벽면 플레이트 설치: Attach the decorative wall plate over the dimmer switch.
- 복원력 : 회로 차단기에서 전원을 다시 켜십시오.
작동 지침
주요 제어
이미지: 폭발된 view diagram of the ECOELER dimmer switch, highlighting its main components: the Dim/Brighten buttons, the ON/OFF button, the LED indicators for brightness level, and the hidden trim dial for adjustment.
- 켜기/끄기 버튼: Press the large paddle switch to turn lights ON or OFF.
- Dim/Brighten Buttons: Use the small up (▲) and down (▼) buttons to adjust the brightness level. There are 13 dimming levels.
- LED 표시등: The 7 LED lights indicate the current brightness level.
- 페이드 온/오프: Lights will gradually illuminate or dim to protect your eyes and extend bulb lifespan. The lowest LED indicator remains softly lit for easy location in the dark.
Minimum Brightness Adjustment (Trim Dial)
The trim dial allows you to set the minimum brightness level to prevent flickering or premature turn-off at low settings, especially with certain LED bulbs.
Image: A visual guide demonstrating how to adjust the minimum brightness using the trim dial. It shows removing the rocker cover, locating the dial, and turning it clockwise for brighter minimum or counter-clockwise for less bright minimum.
- Turn on the dimmer and adjust it to the lowest setting using the down (▼) button.
- Carefully remove the rocker cover (the large paddle switch) to expose the trim dial.
- Use a small screwdriver to rotate the "Trim Dial".
- Turn clockwise (+) to increase the minimum brightness.
- Turn counter-clockwise (-) to decrease the minimum brightness.
- Replace the rocker cover.
호환성
The ECOELER YDM003 dimmer switch is designed for wide compatibility with various bulb types:
- Dimmable LED bulbs up to 150W
- Dimmable CFL bulbs up to 150W
- Incandescent or Halogen bulbs up to 300W
중요한: This dimmer is NOT compatible with smart bulbs. Ensure your bulbs are explicitly labeled as "dimmable" for optimal performance.
Image: The ECOELER dimmer switch displayed next to illustrations of compatible bulb types: 150W/120V Dimmable LED Lamp, 150W/120V CFL Lamp, and 300W/120V Incandescent Lamp.
유지
- 디머 스위치와 벽면 플레이트를 청소하려면 부드러운 천으로 닦아주세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 청소하기 전에 차단기에서 전원을 끄십시오.
- Periodically check for loose connections or signs of wear. If any issues are found, consult a qualified electrician.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 불이 켜지지 않습니다. |
|
|
| 낮은 설정에서는 표시등이 깜박입니다. |
|
|
| Dimmer does not respond to button presses. |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | YDM003 |
| 상표 | 에코엘러 |
| 작동 모드 | 온-오프 |
| 현재 평가 | 5 Amps |
| 운영 볼륨tage | 120볼트(AC) |
| 연락처 유형 | 푸시 버튼 |
| 커넥터 유형 | 나사 |
| 스위치 유형 | Digital Dimmer Light Switch |
| 단말기 | 나사 |
| 재료 | Aluminum, Metal, Polycarbonate |
| 품목 치수(L x W x H) | 1.77 x 1.7 x 4.13 인치 |
| 회로 유형 | 1-way (Single-Pole Only) |
| 장착 유형 | 벽걸이형 |
| 액추에이터 유형 | 푸시 버튼 |
| 위치 수 | 1 |
| 온도 등급 | 화씨 32도에서 화씨 104도(섭씨 0도에서 40도) |
| 컨트롤러 유형 | 디머 스위치 |
| 제어 방법 | 푸시 버튼 |
| 왓tage | 300 watts (Incandescent/Halogen), 150 watts (LED/CFL) |
| 호환 장치 | 150W Dimmable LED/CFL Lights, 300W Incandescent/Halogen Lamp |
| 단위 수 | 1.0 카운트 |
| 접촉 재료 | 계전기 |
| 국제 보호 등급 | IP40 |
| 인증 | ETL, FCC Listed |
보증 및 지원
ECOELER provides a one-year limited warranty against manufacturing defects under normal use. Replacement or refund services are available. For support or warranty claims, please contact the seller via Amazon.
For additional information or assistance, visit the ECOELER Store on Amazon.