Ortis 7-Day Programmable In-Wall Timer Switch

1. 중요한 안전 정보

경고: Risk of electric shock. Improper installation can lead to serious injury or death. Always turn off power at the circuit breaker before installing or servicing this device. Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.

• This device requires a 중성선 for operation. Verify the presence of a neutral wire (typically white) in your electrical box before installation.
• Do not exceed the maximum load rating of 1800W or 3/4 HP at 120V.
• 모든 전선 연결이 안전하고 적절하게 절연되어 있는지 확인하세요.
• 실내에서만 사용하세요.

2. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077)
• 와이어 너트
• 장착 나사
• 사용자 설명서

3. 사양

4. 설치

시작하기 전에: Turn off power at the circuit breaker for the switch location. Confirm power is off using a voltag전자 테스터.

배선도

Image: Wiring diagram for the Ortis timer switch. The diagram illustrates connecting the BLACK wire to the LINE, the BLUE wire to the LOAD, and the WHITE wire to the NEUTRAL. Wire nuts are used for secure connections.

단계별 설치:

1. 전원 끄기: Locate the circuit breaker controlling the switch you are replacing and turn it OFF.
2. 이전 스위치 제거: 기존 벽면 플레이트를 조심스럽게 제거하고, 전기 박스에서 오래된 스위치를 나사로 풀어 분리합니다. 오래된 스위치에서 전선을 분리합니다.
3. 전선 식별: Identify the Line (incoming power), Load (to light/appliance), and Neutral wires in your electrical box. A neutral wire (usually white) is required for this timer switch. If you do not have a neutral wire, this switch is not compatible.
4. 전선 연결: Using the provided wire nuts, connect the wires from the Ortis timer switch to your household wiring as follows:
   • 연결하다 검은색 타이머에서 전선을 연결하세요 선 (hot) wire from your electrical box.
   • 연결하다 파란색 타이머에서 전선을 연결하세요 짐 전선 (조명/가전제품에 연결하는 전선).
   • 연결하다 하얀색 타이머에서 전선을 연결하세요 중립적 wire from your electrical box.
5. 마운트 스위치: Carefully fold the wires into the electrical box and secure the timer switch with the provided mounting screws.
6. 벽면 플레이트 설치: Attach your standard wall plate (not included) over the timer switch.
7. 복원력 : 회로 차단기에서 전원을 다시 켜세요.

5. 통제view

이미지: 상세 view of the Ortis timer switch interface. The blue backlit LCD screen displays time, day, and program status. Buttons for increasing/감소asing values, changing modes, and manual on/off control are clearly indicated. An LED illuminates when the load is active.

The Ortis timer switch features an intuitive three-button interface and a blue backlit LCD screen for easy operation and visibility in low light conditions.

• LCD 화면: Displays current time, day, operating mode, load state, and program information.
• Increase Key: Used to adjust time, program values, or navigate menus upwards.
• Decrease Key: Used to adjust time, program values, or navigate menus downwards.
• 모드 키: Cycles through different operating modes and settings menus.
• 온/오프 키: Manually turns the connected load ON or OFF, or confirms selections.
• LED 표시등: Illuminates when the connected load (e.g., light, fan) is ON.

6. 초기 설정

After installation and restoring power, the device will require initial setup.

현재 시간 및 날짜 설정:

1. 를 누르세요 방법 key until the time setting appears.
2. 사용하세요 증가하다 그리고 감소하다 keys to set the current hour, then press 켜기/끄기 확인합니다.
3. 분 단위와 요일 단위로 반복하세요.

Setting Latitude and Longitude (for Sunrise/Sunset):

This feature allows the timer to automatically adjust ON/OFF times based on local sunrise and sunset.

1. 를 누르세요 방법 key until the latitude/longitude setting appears.
2. 사용하세요 증가하다 그리고 감소하다 keys to input your local latitude and longitude values. A chart of major cities may be provided in the full manual for reference, or you can look up your specific coordinates online.
3. 누르다 켜기/끄기 to confirm. The display will show the calculated sunrise/sunset times for verification.

일광 절약 시간제(DST) 조정:

The timer can be configured to automatically adjust for Daylight Saving Time. Refer to the full manual for specific steps to enable or disable this feature.

7. 작동 모드

The Ortis timer switch offers three primary operating modes:

7.1 Automatic Mode (Sunrise/Sunset & Fixed Schedules)

Image: Illustration of the timer switch's automatic control, showing lights turning off at sunrise and on at sunset. The blue backlit LCD screen is visible, indicating clear readability in the dark.

In Automatic Mode, the timer operates based on programmed schedules, including sunrise/sunset times or custom ON/OFF times.

• Sunrise/Sunset Control: Once latitude and longitude are set, the timer automatically calculates and adjusts ON/OFF times daily based on local sunrise and sunset. An offset can be applied to turn lights on/off before or after these times.
• Fixed Schedules: Up to 7 custom ON/OFF programs can be set for specific times and days of the week.

7.2 랜덤 모드

Image: A visual representation of the timer's random mode, designed to enhance home security by simulating occupancy. Lights turn on and off at varied times, creating a 'lived-in' appearance.

Random Mode varies the ON/OFF times of your lights or appliances slightly to simulate occupancy, enhancing home security when you are away.

• To activate Random Mode, press the 방법 key until "Random" is displayed.
• The timer will then randomly adjust your programmed ON/OFF times within a certain window.

7.3 수동 모드

Manual Mode allows you to override any programmed schedules and turn the connected load ON or OFF instantly.

• 를 누르세요 켜기/끄기 key to toggle the connected load between ON and OFF.
• The timer will remain in the manually set state until the next programmed event or until Manual Mode is exited.

8. 프로그래밍 일정

The Ortis timer switch allows you to set up to 7 distinct ON/OFF programs. Programs can be set for specific days, weekdays, weekends, or all 7 days.

Steps to Program a Schedule:

1. 를 누르세요 방법 key repeatedly until "P01" (Program 1) appears on the screen.
2. 사용하세요 증가하다 그리고 감소하다 keys to select the desired ON time (hour and minute), then press 켜기/끄기 확인합니다.
3. Next, select the days of the week for this ON event. You can choose individual days, groups (e.g., Mon-Fri, Sat-Sun), or all 7 days. Press 켜기/끄기 확인합니다.
4. Repeat the process to set the corresponding OFF time and days for Program 1.
5. To set additional programs (P02-P07), press the 방법 key to advance to the next program number and repeat steps 2-4.
6. 모든 프로그램 설정이 완료되면 버튼을 누르십시오. 방법 key until the current time display returns, indicating the timer is ready to operate.

메모: All settings are saved permanently and will resume operation even after a power outage due to the internal battery backup.

9. 폭넓은 호환성

Image: A collage demonstrating the wide range of devices compatible with the Ortis timer switch. Examples include LED, CFL, incandescent, and halogen lights, as well as ceiling fans, fountain pumps, pool pumps, and sprinklers.

The Ortis timer switch is compatible with various lighting types and appliances:

• LED, CFL, Incandescent, Halogen, and Fluorescent Lights
• 천장선풍기
• 욕실 환풍기
• 분수 펌프
• 수영장 펌프
• 스프링클러

10. 유지관리

The Ortis timer switch requires minimal maintenance.

• 청소: 부드러운 d로 표면을 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 사용자가 수리할 수 없는 부품: Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic troubleshooting.

11. 문제 해결

12. 보증 및 지원

The Ortis 7-Day Programmable In-Wall Timer Switch (Model KJ-077) comes with a 2년 제조사 보증.

For technical support, warranty claims, or further assistance, please refer to the contact information provided with your purchase or visit the official Ortis web대지.