RAINPOINT B0FX329V4L

RAINPOINT 4-Zone Sprinkler Timer User Manual

Model: B0FX329V4L

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your RAINPOINT 4-Zone Sprinkler Timer. Please read this manual thoroughly before use to ensure proper function and longevity of the device. This timer is designed to automate watering for up to four distinct zones in your garden or lawn.

2. 안전 정보

  • 타이머를 물에 담그지 마십시오.
  • Ensure all connections are tight to prevent leaks. Use plumber's tape if necessary.
  • Install the timer vertically to prevent water from entering the electronics.
  • Use only 4 AA alkaline batteries (not included). Do not mix old and new batteries or different battery types.
  • Replace batteries when the low power indicator flashes to avoid unexpected valve closure.
  • Protect the timer from freezing temperatures by removing it from the faucet and storing it indoors during winter.

3. 제품 오버view

The RAINPOINT 4-Zone Sprinkler Timer features a large LCD display, a multi-function dial, and four independent outlets for customized watering schedules.

RAINPOINT 4-Zone Sprinkler Timer with four outlets connected to hoses

그림 3.1: 이상view of the RAINPOINT 4-Zone Sprinkler Timer with hoses connected to each zone.

3.1개의 구성요소

  • LCD 디스플레이: Shows current time, programming settings, and battery status.
  • 다기능 다이얼: Used to navigate between settings (SET CLOCK, START TIME, HOW LONG, HOW OFTEN, ON, OFF, VIEW).
  • 버튼: '+', '-', 'OK/MANUAL', 'ZONE', 'DELAY'.
  • 물 유입구: Connects to your outdoor faucet (3/4'' thread).
  • 물 배출구 (4개): 각 구역별 급수용으로 정원 호스에 연결하세요.
  • 배터리 칸: 뒷면에 있으며, AA 배터리 4개가 필요합니다.

4. 설정

4.1 배터리 설치

  1. 타이머 뒷면에서 배터리 구획을 찾으세요.
  2. 배터리 커버를 밀어서 엽니다.
  3. 올바른 극성(+/-)을 확인하여 새로운 AA 알카라인 배터리 4개를 삽입합니다.
  4. Close the battery cover securely to maintain its waterproof seal.
Close-up of the battery compartment on the RAINPOINT sprinkler timer

그림 4.1: AA 배터리 4개를 넣는 배터리 칸.

4.2 타이머 설치

The timer should be installed vertically to ensure proper operation and prevent water from entering the electronic components. The product is approximately 2.2 pounds, and a metal rod is included for stable mounting.

  1. Attach the timer's water inlet to your outdoor faucet. Hand-tighten only.
  2. If your faucet is low to the ground, ensure there is enough space below the timer to connect the four output hoses.
  3. Use the provided metal rod and screw to secure the timer to a stable surface (e.g., a wooden post or wall) to prevent it from falling due to weight or water pressure.
RAINPOINT sprinkler timer mounted on a wooden post with a metal rod for stability

Figure 4.2: Timer mounted with a metal rod for enhanced stability.

4.3 호스 연결

  1. Connect your garden hoses to the four individual outlets at the bottom of the timer.
  2. Ensure each hose is securely attached to prevent leaks.

Video 4.1: Installation Tutorial for RAINPOINT Timer, 4 Outlets. This video demonstrates the physical installation process of the timer to a faucet and connecting hoses.

5. 사용 설명서

5.1 현재 시간 설정

  1. 다이얼을 다음으로 돌립니다. 시계 설정.
  2. Use the '+' and '-' buttons to adjust the current time (12-hour or 24-hour format).
  3. 누르다 확인/수동 확인합니다.

5.2 Programming Watering Schedules (Automatic Mode)

Each of the four zones can be programmed independently. Only one zone valve can be open at a time. Setting repetitive working times for multiple zones simultaneously may cause issues.

  1. 다이얼을 다음으로 돌립니다. 시작 시간'+'와 '-'를 사용하여 원하는 급수 시작 시간을 설정하세요. 확인/수동 확인합니다.
  2. 다이얼을 다음으로 돌립니다. 얼마나 걸려요. Use '+' and '-' to set the watering duration (from 1 minute to 3 hours 59 minutes). Press 확인/수동 확인합니다.
  3. 다이얼을 다음으로 돌립니다. 얼마나 자주. Use '+' and '-' to set the watering frequency (every 1-12 hours, or every 1-7 days). Press 확인/수동 확인합니다.
  4. To program another zone, press the button and repeat steps 1-3 for the next zone.
  5. Once all desired zones are programmed, turn the dial to ON to activate the automatic watering schedule.
RAINPOINT sprinkler timer display showing watering cycle modes: start time, duration, and frequency settings

Figure 5.1: Display showing options for setting watering cycle modes.

5.3 강우 지연 기능

The rain delay function allows you to pause your watering schedule for a set period to avoid overwatering during rainy weather.

  1. 다이얼이 설정되어 있는지 확인하십시오. ON.
  2. 를 누르세요 지연 단추.
  3. Use the '+' or '-' buttons to select a delay period of 24, 48, or 72 hours.
  4. 누르다 확인/수동 to confirm the rain delay. The timer will resume its schedule after the selected delay period.
RAINPOINT sprinkler timer showing rain delay options of 24, 48, and 72 hours

Figure 5.2: Rain delay options displayed on the timer.

5.4 수동 급수

Manual watering allows you to water immediately without interrupting your programmed schedule.

  1. 다이얼이 설정되어 있는지 확인하십시오. ON.
  2. 를 누르고 계세요 확인/수동 단추.
  3. Use the '+' or '-' buttons to set the desired manual watering duration (from 1 minute to 8 hours).
  4. 를 누르세요 button to select which zone(s) to water manually.
  5. 누르다 확인/수동 수동으로 물을 주기 시작하세요. 타이머는 설정된 시간이 지나면 자동으로 멈춥니다.
RAINPOINT sprinkler timer showing manual watering duration setting and zone selection

Figure 5.3: Manual watering mode with duration and zone selection.

Video 5.1: QA about RAINPOINT Sprinkler Timer, 4 Outlets. This video addresses common questions and operational aspects of the timer.

6. 유지관리

6.1 배터리 교체

When the low power indicator flashes on the display, it is time to replace the batteries. Follow the steps in Section 4.1. Prompt battery replacement prevents the valves from closing unexpectedly and interrupting watering schedules.

6.2 청소

Periodically check the water inlet filter for debris. Remove and rinse the filter under running water if it appears clogged. Do not use abrasive cleaners or solvents on the timer.

6.3 방한처리

Before the first frost, remove the timer from the faucet. Drain any remaining water from the unit and store it in a dry, frost-free location indoors. Remove batteries if storing for extended periods.

7. 문제 해결

  • 물의 흐름이 없음:
    • Check if the faucet is turned on.
    • Ensure batteries are installed correctly and have sufficient power.
    • Verify that the watering schedule is correctly programmed and the dial is set to ON.
    • Check the water inlet filter for clogs.
  • 누수:
    • Ensure all connections (faucet and hose outlets) are hand-tightened.
    • Check the rubber washer in the water inlet. If it is loose, damaged, or missing, adjust or replace it.
    • Apply plumber's tape to threads if leaks persist.
  • 물 주는 시간이 잘못됨:
    • Verify the current time setting (Section 5.1).
    • Review your programmed watering schedules for each zone (Section 5.2).
    • Ensure only one zone valve is scheduled to open at a time.
  • 디스플레이가 작동하지 않습니다:
    • 배터리를 새 AA 알칼리 배터리로 교체하십시오.
    • 배터리 극성을 확인하십시오.

8. 사양

특징사양
모델B0FX329V4L
상표레인포인트
아울렛4 individual programmable zones
물주기 시간1분 ~ 3시간 59분
급수 빈도1~12시간마다 또는 1~7일마다
비로 인한 연기 옵션24, 48, 72시간
수동 급수 기간1분부터 8시간까지
전원AA 알카라인 배터리 4개(포함되지 않음)
수압 범위최대 116 PSI
제품 치수4인치 깊이 x 8인치 너비 x 7인치 높이
품목 무게2.2 파운드
화면 크기3.3 인치

9. 보증 및 지원

RAINPOINT products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official RAINPOINT web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.