소개
The hygger Lite Wave Maker is designed to create natural water currents within your aquarium, promoting a healthy and dynamic environment for fish, corals, and invertebrates. This adjustable circulation pump features a magnetic base for secure and easy installation, offering multiple wave-making modes and precise flow rate adjustments. This manual provides essential information for the safe and effective use of your wave maker.
안전 지침
- Always unplug the device from the power outlet before performing any maintenance, cleaning, or installation procedures.
- Ensure your hands are completely dry before handling the power adapter or plugging in the device.
- Do not operate the wave maker if the power cord, plug, or any other component is damaged. Contact customer support for assistance.
- This device is intended for indoor aquarium use only. Do not use it for purposes other than those specified.
- 기기 및 구성품은 어린이와 반려동물의 손이 닿지 않는 곳에 보관하십시오.
- The controller unit is 방수가 안됨. Ensure it remains dry and away from water splashes.
- Ensure the pump is fully submerged in water during operation to prevent dry running and potential damage.
제품 끝view
구성 요소: Front Shell, Impeller, Pump Motor, Magnetic Base, Hard Protection Cover.
시스템 오버view: Wave maker pump, controller, DC adapter, and connecting cables.
The hygger Lite Wave Maker consists of a compact pump unit, a magnetic base for attachment, a wired controller, and a DC power adapter. The pump is designed for quiet operation and efficient water circulation.
설치 지침
- 수족관 준비: Ensure your aquarium is clean and filled with water to the desired level.
- 펌프 설치:
The wave maker attaches to the aquarium glass using its magnetic base. Place the pump unit inside the tank and align the external magnet on the outside of the glass. The magnetic hold is suitable for glass thickness up to 6mm. Ensure the hard protection cover is securely aligned on the pump to prevent small fish or invertebrates from being drawn in.
- 위치: Position the wave maker to achieve the desired water flow pattern. It can be placed higher for surface waves, in the middle for general circulation, or lower to stir up bottom debris. The pump is recommended for 10 to 50-gallon freshwater and saltwater aquariums up to 31 inches long.
- 컨트롤러를 연결합니다: 펌프 케이블을 컨트롤러에 연결하세요.
- 전원 연결: Connect the DC power adapter to the controller, then plug the adapter into a suitable electrical outlet (AC 110-240V).
- 초기 확인: Once powered, the pump should begin operating according to its default settings. Observe the water flow and adjust as needed.
작동 지침
The hygger Lite Wave Maker features a smart controller with a digital display and intuitive buttons for adjusting settings.
The controller allows adjustment of wave patterns, speed, and frequency.
컨트롤러 기능:
- LED 디지털 디스플레이: Shows current frequency (P) and flow rate (F) settings.
- M/FE Button: Press to cycle through wave-making modes. Press and hold to activate Feeding Mode.
- '+' 버튼: Increases flow rate or wave frequency.
- '-' 버튼: Decreases flow rate or wave frequency.
Wave-Making Modes:
Select from four distinct wave patterns to simulate natural aquatic environments.
- Constant Wave Mode (01): Provides a stable and continuous water flow.
- Pulse Wave Mode (02): Delivers short bursts of strong water flow.
- Sine Wave Mode (03): Mimics the rise and fall of tides with a dynamic water flow.
- Random Wave Mode (04): Generates automatically changing water flow speeds.
Adjusting Flow Rate and Frequency:
Adjust flow rate using the '+' and '-' buttons (F1 to F10).
Adjust wave frequency using the '+' and '-' buttons (P1 to P10).
Use the '+' and '-' buttons to adjust the flow rate (10 levels, displayed as F1-F10) and wave frequency (10 levels, displayed as P1-P10) to suit your aquarium's specific needs.
수유 모드:
Press and hold the 'M/FE' button to activate feeding mode, pausing flow for 9 minutes.
To feed your aquatic inhabitants, press and hold the 'M/FE' button. The pump will pause operation for 9 minutes, allowing food to be consumed without being immediately dispersed by the current. The pump will automatically resume its previous settings after 9 minutes.
공식 제품 비디오:
This video demonstrates the installation and various operating modes of the hygger Lite Wave Maker, including how to adjust settings and utilize the feeding mode.
유지
Regular cleaning of your wave maker is essential to ensure optimal performance and longevity. If the impeller becomes stuck or blocked, follow these steps:
- 전원 분리: Always unplug the wave maker from the power outlet before cleaning.
- 탱크에서 꺼내기: 수조에서 펌프 장치를 조심스럽게 꺼내십시오.
- 분해:
Twist the front shell counter-clockwise to detach it. Separate the outer cage and carefully take out the impeller. The magnetic base and pump motor remain connected to the cable.
- 깨끗한 구성 요소: Rinse all disassembled parts (front shell, outer cage, impeller) under clean water. Use a soft brush or cloth to remove any algae, debris, or mineral buildup. Ensure the impeller spins freely.
- 재조립: Carefully reassemble the components in reverse order. Ensure the impeller is correctly seated and the front shell is securely twisted back into place.
- 재설치: Place the cleaned wave maker back into the aquarium and reconnect the power.
문제 해결
The controller's digital display may show error codes to indicate specific issues:
Error codes provide quick identification of common problems.
| 오류 코드 | 설명 | 해결책 |
|---|---|---|
| E01, E02, E03 | 현재 볼륨tage Fault (Overvoltag전자, 언더볼tage, Overcurrent) | 컨트롤러를 교체하세요. |
| E04 | 드라이 러닝 | 펌프가 물에 완전히 잠겨 있는지 확인하세요. |
| E05 | Motor Blockage | Disassemble the pump and clean the impeller as described in the Maintenance section. |
여기에 나열되지 않은 문제가 발생하거나 제시된 해결 방법으로 문제가 해결되지 않으면 고객 지원팀에 문의하십시오.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | HG172NEW |
| 힘 | 6 와트 |
| 최대 유량 | 792 GPH(시간당 갤런) |
| Applicable Aquarium Size | 10-50 Gallons (up to 31" long tanks) |
| Max Glass Thickness | 6mm (XNUMXmm) |
| 권tage 입력 | 교류 110-240V |
| 권tage 출력 | 직류 12V |
| 펌프 치수 | 1.6 x 1.9 인치 |
| 코드 길이 | 4.7 FT (pump to controller) + 7.2 FT (controller to adapter) |
| 재료 | 스테인리스 스틸(내부 부품), 플라스틱(외장) |
| 색상 | 검은색 |
보증 정보
Specific warranty details are not provided in the product data. Please refer to the product packaging or contact the manufacturer directly for warranty terms and conditions.
고객 지원
For further assistance, technical support, or inquiries regarding your hygger Lite Wave Maker, please visit the official hygger store or contact their customer service department.
hygger Store: https://www.amazon.com/stores/hygger/page/42A01E3C-6B12-4432-9B13-22DAE2FF23FC