소개
This manual provides comprehensive instructions for the Anderic TRA049G1M replacement remote control, designed for use with specific Harbor Breeze ceiling fan models. Please read this guide thoroughly to ensure proper setup and operation of your new remote control.
제품 끝view
The Anderic TRA049G1M is a direct replacement for original Harbor Breeze TRA049G1M and 2AQZU-18052 remotes. It features a user-friendly button layout for controlling fan speeds, light functions, and special modes. The remote is designed to fit into a wall mount bracket for convenient access.
Figure 1: Front of Anderic TRA049G1M Remote Control. The remote features buttons for fan off, fan high, fan medium, fan low, on/off light control & dimmer, 1 min delay for lights off, random fan speed cycling, and random lights on/off. The FCC ID 2AQZU-18052 is printed at the top, and a QR code for support is at the bottom. For more information, scan the QR code or visit https://qr.link/CpbUBA.
호환성
This remote control is compatible with the following models and kits:
- Works with Summersville collection Ceiling Fans | 4L000015190 (KIT), MRAC04S1M-LD-F0 (RECEIVER)
- Operates on 304.25 MHz frequency
- Compatible with 4L000015190 kit and MRAC04S1M-LD-F0 receiver
- Replaces original Harbor Breeze TRA049G1M & 2AQZU-18052 remote
설정
배터리 설치
The Anderic TRA049G1M remote control requires one A23 battery (sold separately). Follow these steps to install the battery:
- 리모콘 뒷면에 있는 배터리함 덮개를 찾으세요.
- 배터리 덮개를 아래로 밀어서 엽니다.
- Insert one A23 battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- 딸깍 소리가 날 때까지 배터리 덮개를 다시 제자리에 밀어 넣습니다.
Figure 2: Battery Compartment of Anderic TRA049G1M Remote Control. The image shows the back of the remote with the battery cover removed, revealing the single A23 battery slot. The FCC ID 2AQZU-18052 is also visible at the top.
페어링/동기화
The Anderic TRA049G1M remote control is typically a direct replacement and may not require explicit pairing if your existing fan receiver is already configured for this model. If your fan does not respond after battery installation, refer to your ceiling fan's original instruction manual for specific pairing or syncing procedures, as these steps are usually performed at the fan receiver unit.
작동 지침
Familiarize yourself with the remote's buttons and their functions:
| 단추 | 기능 |
|---|---|
| Power (Fan Off) | 천장 선풍기를 끕니다. |
| Light (On/Off Light Control & Dimmer) | Turns the fan light on or off. Press and hold to dim or brighten the light. |
| 팬 하이 | 팬 속도를 높음으로 설정합니다. |
| 1 Min Delay (Lights Turn Off) | Press for a 1-minute delay before the lights turn off. |
| 팬 매체 | 팬 속도를 중간으로 설정합니다. |
| Random Fan Speed Cycling | Press to activate random fan speed cycling, providing varied airflow. |
| 팬 낮음 | 팬 속도를 낮게 설정합니다. |
| Random Lights On/Off | Press to activate random lights on/off, simulating occupancy. |
유지
배터리 교체
When the remote control's range decreases or buttons become unresponsive, it may be time to replace the battery. The remote uses one A23 battery.
- 리모컨 뒷면의 배터리실 덮개를 엽니다.
- 기존 A23 배터리를 제거하세요.
- Insert a new A23 battery, observing the correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
- 폐배터리는 지역 규정에 따라 책임감 있게 폐기하십시오.
문제 해결
- 리모컨이 응답하지 않음:
- 배터리가 올바르게 설치되었는지, 충전량이 충분한지 확인하십시오. 필요한 경우 교체하십시오.
- 리모컨과 선풍기 수신기 사이에 장애물이 없는지 확인하십시오.
- Verify the fan's power supply is on.
- If the remote is new or has been reset, refer to the fan's original manual for pairing instructions.
- Lights not dimming:
- Ensure the light bulbs installed in your fan are dimmable. Non-dimmable bulbs will not respond to the dimmer function.
- Press and hold the light button to activate the dimming feature.
- Fan not changing speeds:
- Confirm the fan is receiving power.
- Try pressing the fan speed buttons multiple times.
명세서
- 모델: Anderic TRA049G1M
- 빈도: 304.25MHz
- 배터리 유형: 1 x A23 (12V) (not included)
- 호환성: Harbor Breeze 2AQZU-18052, TR326A 2AQZU-18007, Summersville collection Ceiling Fans (4L000015190 KIT, MRAC04S1M-LD-F0 RECEIVER)
보증 및 지원
For warranty information or technical support, please contact Anderic customer service. Keep your purchase receipt as proof of purchase. You may also find additional resources by scanning the QR code on the back of your remote or visiting the provided link: https://qr.link/CpbUBA.