소개
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
중요한 안전 정보
- 감전 위험: 전구를 설치하거나 교체하기 전에 항상 전원을 차단하십시오.
- 실내/실외 사용: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- 권tage: 고정 장치의 볼륨을 확인하세요tage is 120V. Do not use with incompatible voltage.
- 디밍 : This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- 온도: Do not operate outside the specified temperature range of -20°C to +45°C.
- 손질: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- 처분: LED 전구는 지역 규정에 따라 폐기하십시오.
설정 및 설치
- 전원 끄기 : Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- 오래된 전구 제거: 기존 전구를 조심스럽게 돌려서 빼내세요.
- 새 전구 삽입: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- 전원 켜기: 조명기에 전원을 복원합니다.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
작업
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- 밝기 조절: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- 조명 품질: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- 빔 확산: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
유지
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- 청소: 전구를 청소하려면 전원이 꺼져 있고 전구가 식었는지 확인하십시오. 부드럽고 마른 천으로 살살 닦아주세요. 액체 세제나 연마성 재질은 사용하지 마십시오.
- 대사: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
문제 해결
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- 전구가 켜지지 않습니다:
- 조명기구의 전원이 켜져 있는지 확인하십시오.
- 전구가 제대로 꽂혀 있는지 확인하세요.
- 전구가 고장이 아닌지 확인하려면 다른 정상 작동하는 조명기구에 전구를 꽂아 테스트해 보세요.
- Verify the fixture itself is operational.
- 깜빡거리거나 불규칙한 조명:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- 볼륨을 확보하세요tag전원 공급은 120V로 안정적입니다.
- Bulb is Too Dim or Too Bright:
- 조광기를 사용하는 경우 조광기 설정을 조정하십시오.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | S12535 |
| 왓tage | 5와트(40W 백열전구와 동일) |
| 명도 | 425루멘 |
| 색온도 | 5000K(내추럴 화이트) |
| 전구 모양 | ST19 |
| 기본 유형 | E26 미디엄 베이스 |
| 연색지수(CRI) | 92 |
| 빔 각도 | 300도 |
| 권tage | 120V |
| 밝기 조절 가능 | Yes (with compatible 120V dimmers) |
| 정격 수명 | 15,000시간 |
| 환경 등급 | Wet Location Rated (IP65), Enclosed Fixture Rated |
| 작동 온도 | -20°C ~ +45°C |
| 인증 | cULus, FCC, RoHS |
| 역률 | 0.7 |
| 빈도 | 60Hz |
| 제품 무게 (6개입) | 1.06 파운드 |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
보증 및 지원
The Satco S12535 ST19 LED Light Bulb is backed by a 2년 제조사 보증 구매일로부터.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco web최신 연락처 정보는 사이트에서 확인하세요.
Web대지: www.satco.com