1. 소개 및 이상view
Thank you for choosing the hygger 500W Aquarium Heater. This submersible fish tank heater is designed to provide stable and accurate temperature control for your aquatic environment. It features an upgraded dual protection system, an external LED digital display controller, and automatic safety functions to ensure the well-being of your aquatic pets and the longevity of the device. This model is suitable for 66 to 135-gallon freshwater and saltwater tanks.
Image 1.1: The hygger 500W Aquarium Heater and its external controller.
2. 주요 특징
- Upgraded Dual Temperature Control System: Equipped with two intelligent protectors, this system ensures continuous operation even if one protector fails, preventing overheating and maintaining a safe temperature range for your aquatic organisms.
- Comprehensive Protection with Beep Alarm: An intelligent water and temperature sensor system provides multiple layers of protection:
- 과열 경보: Displays "HH" and automatically stops heating if water temperature exceeds 94℉ (34℃).
- Off-water Alarm: Flashes "Auto Shut Off" and stops heating if the water level drops below the heater's water level.
- 저온 경고: Displays "LL" if the water temperature falls below 58℉ (14℃).
- External Controller with LED Digital Display: The controller clearly shows real-time water temperature, set temperature, operating power, error codes, and heating status. Temperature settings range from 59-93℉ (15-34℃), adjustable in 1℉ increments. The external design allows for safe adjustments without submerging hands in water.
- Premium Safety & Durability: Constructed with explosion-proof quartz glass, a high-temperature resistant nickel-chromium heating wire, and quartz sand for efficient heat conduction. A strong black ABS protective shell safeguards both the heater and your aquatic pets.
- Optimal for 66-135 Gallon Tanks: The 500-watt heater provides stable and rapid heating for various aquatic environments, including saltwater and freshwater aquariums, fish tanks, turtle tanks, and small ponds.
Image 2.1: Components and materials used in the hygger aquarium heater for durability and safety.
3. 설정 지침
Proper installation is crucial for the safe and efficient operation of your hygger aquarium heater. Follow these steps carefully:
- 완전히 담그기: Ensure the heater is fully submerged in water. The water level must always be above the heater's minimum water line to prevent dry running.
- 최적의 배치: Install the heater in an area with good water circulation, ideally near the pump outlet. This promotes even heat distribution throughout the tank.
- 효율성을 위한 각도: For best results, tilt the heater at a 30-45 degree angle to facilitate even heat distribution.
- 안전한 장착: Use the provided strong suction cups to firmly attach the heater to the tank wall.
- External Controller Placement: Mount the external LED digital controller in a dry, easily accessible location outside the tank. Ensure the power cord and sensor cable are routed safely and securely.
Image 3.1: Correct installation methods for the hygger aquarium heater.
4. 사용 설명서
The hygger aquarium heater features an intelligent digital display controller for easy temperature management.
4.1 LED 디지털 디스플레이 이해하기
이미지 4.1: 상세 view of the external controller's LED display.
- 작동 표시기: Red light indicates heating; white light indicates constant temperature or stop heating.
- 물의 온도: Displays the real-time water temperature in Fahrenheit.
- 작동 전력: Shows the current power consumption in watts.
- 오류 코드: Displays specific codes for issues (e.g., "Auto shut off", "HH", "LL").
- Desired Temp: Shows the user-set target temperature.
- 설정 버튼: 원하는 온도를 조절하는 데 사용됩니다.
4.2 온도 설정
- Plug the heater into a power outlet. The display will illuminate.
- Press the "SET" button on the external controller. The desired temperature will begin to flash.
- Each press of the "SET" button will increase the desired temperature by 1℉. Cycle through the range of 59-93℉ (15-34℃) until your desired temperature is displayed.
- After selecting the temperature, stop pressing the button. The display will stop flashing after a few seconds, and the heater will begin to adjust the water temperature to your setting.
Image 4.2: The heater's precise temperature control system in action.
4.3 전원 차단 메모리 기능
The heater is equipped with a power-off memory function. In the event of a power outage or if the unit is unplugged (e.g., for water changes), it will automatically retain the last set temperature when power is restored. No recalibration is needed.
Image 4.3: Illustration of the anti-dry burning and memory functions.
5. 유지관리
Regular maintenance ensures the optimal performance and longevity of your hygger aquarium heater.
- 청소: Periodically clean the heater's surface to remove algae or mineral buildup. Always unplug the heater and allow it to cool completely before removing it from the water for cleaning. Use a soft cloth or brush and tank water to gently wipe the surface. Do not use harsh chemicals or abrasive materials.
- 점검: Regularly inspect the heater for any signs of damage, such as cracks in the quartz glass or frayed cables. If any damage is observed, discontinue use immediately and contact customer support.
- 물 교체: Before performing water changes that might expose the heater to air, always unplug the unit to activate the automatic shut-off and prevent dry burning.
6. 문제 해결
The hygger aquarium heater is designed with multiple safety features and error indicators to help you identify and resolve common issues.
6.1 오류 코드 및 해결 방법
Image 6.1: Visual representation of over-temperature and low-temperature alarms.
- "HH" Displayed (Over-temperature Alarm):
원인: Water temperature has exceeded 94℉ (34℃). The heater has automatically stopped heating.
해결책: Check the ambient room temperature. If it's too high, consider cooling the room or increasing tank ventilation. Ensure proper water circulation. The heater will resume normal operation once the temperature drops to the set level. - "Auto Shut Off" Flashing (Off-water Alarm):
원인: The water level in the tank is lower than the heater's water level sensor, indicating the heater is not fully submerged.
해결책: Immediately unplug the heater. Add water to the tank until the heater is fully submerged. Wait a few minutes for the heater to cool, then plug it back in. Ensure the heater is always fully submerged during operation. - "LL" Displayed (Low Temperature Alert):
원인: Water temperature is below 58℉ (14℃). The heater will continue to operate to raise the temperature.
해결책: This is an informational alert. Ensure the heater's wattage is appropriate for your tank size (refer to specifications). Check if the heater is plugged in and functioning correctly. If the temperature does not rise, ensure the heater is not faulty. - 히터가 작동하지 않음:
원인: 파워 아웃tage, incorrect temperature setting, or heater malfunction.
해결책: Check power supply. Verify the set temperature is higher than the current water temperature. If the issue persists, contact customer support.
7. 사양
Detailed specifications for the hygger 500W Aquarium Heater (Model HG275).
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | HG275 |
| 왓tage | 500 와트 |
| 권장 탱크 크기 | 66~135갤런(250~343리터) |
| 온도 조절 범위 | 59-93 ℉ (15-34 ℃) |
| 히터 치수 | 10.8 x 2.9 x 1.1 인치 |
| 전원 코드 길이 | 10.1 ft (3.9ft + 6.2ft) |
| 재료 | Quartz Glass, Nickel-Chromium, ABS |
| 색상 | 검은색 |
| 포함된 구성 요소 | Aquarium Heater, Controller |
Image 7.1: Comprehensive size and specification chart for hygger aquarium heaters.
8. 보증 및 지원
The hygger 500W Aquarium Heater (Model HG275) comes with a 2년 제조업체 보증.
For technical assistance, warranty claims, or any questions regarding your product, please contact hygger customer support through the retailer where you purchased the product or visit the official hygger web연락처 정보 사이트.
보증 확인을 위해 구매 증빙서류를 보관하세요.