MAXSHOT V1 Electric Scooter User Manual

1. 서론

Thank you for choosing the MAXSHOT V1 Electric Scooter. This manual contains important information regarding the safe assembly, operation, and maintenance of your scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety. Keep this manual for future reference.

2. 안전 정보

Riding an electric scooter carries inherent risks. Always prioritize safety. Failure to follow the instructions in this manual may result in serious injury or property damage.

일반 안전 지침:

• 자전거를 탈 때는 반드시 헬멧과 기타 보호 장비(무릎 보호대, 팔꿈치 보호대)를 착용하세요.
• 알코올이나 약물의 영향을 받은 상태에서는 주행하지 마십시오.
• 모든 현지 교통 법규를 준수하십시오.
• Avoid riding in heavy traffic, at night, or in poor weather conditions (rain, snow, ice).
• 다른 차량과 보행자로부터 안전한 거리를 유지하세요.
• 스턴트나 갑작스러운 기동을 하지 마십시오.
• 매번 주행 전에 스쿠터가 완전히 충전되었는지, 모든 부품이 단단히 고정되었는지 확인하십시오.
• 최대 하중 용량은 264파운드(120kg)입니다. 이 한도를 초과하지 마십시오.
• This scooter is designed for individuals aged 14 and above.

배터리 안전:

• 스쿠터와 함께 제공된 정품 충전기만 사용하세요.
• Do not charge the battery in unventilated areas or near flammable materials.
• Fully charge the scooter before its first use.
• Regularly inspect the battery and charger for any damage.
• 배터리 팩을 열거나 개조하려고 하지 마세요.

3. 패키지 내용

포장을 풀 때 아래 나열된 모든 품목이 들어 있고 상태가 양호한지 확인하세요.

• MAXSHOT V1 Electric Scooter
• 사용 설명서 (본 문서)
• 전원 충전기
• Tool Kit (if applicable, for minor assembly)
• Storage Bag (for V1-Bag Included variant)

품목이 누락되었거나 손상된 경우 즉시 고객 지원팀에 문의하세요.

4. 제품 오버view

Familiarize yourself with the main components of your MAXSHOT V1 Electric Scooter.

그림 4.1: 위에view of the MAXSHOT V1 Electric Scooter and its accompanying mobile application interface.

주요 구성 요소:

• 핸들바: Controls steering, acceleration, and braking.
• 디스플레이 패널 : Shows speed, battery level, headlight status, and cruise control.
• 전조등: 가시성을 위한 전면 조명.
• 브레이크 레버 : 이중 제동 시스템을 작동시킵니다.
• 조절판: 가속을 제어합니다.
• 접는 메커니즘: 컴팩트하게 보관하고 운반할 수 있습니다.
• 갑판: Foot platform.
• 킥스탠드: Supports the scooter when parked.
• 앞바퀴: 8.5-inch solid tire.
• 뒷바퀴: 8.5-inch solid tire with integrated 350W motor.
• 테일 라이트: Rear illumination and brake light.
• 충전 포트: For connecting the power charger.

그림 4.2: 상세한 view of the handlebar display, indicating speed, battery life, headlight status, and cruise control.

그림 4.3: Illustration of the 350W powerful brushless motor, providing smooth acceleration and a top speed of 16 mph.

5. 조립 및 설정

The MAXSHOT V1 Electric Scooter comes largely pre-assembled. Follow these steps to prepare your scooter for its first ride.

1. 스쿠터를 펼치세요:
   • 스쿠터를 평평한 표면에 놓으십시오.
   • 핸들바 스템 하단 부근에 있는 접이식 잠금장치를 풀어주세요.
   • Carefully lift the handlebar stem until it locks into the upright position. Ensure the latch is securely engaged.
   

   그림 5.1: The scooter's portable folding design for easy transport and storage.
2. Attach Handlebars (if detached):
   • Align the handlebars with the stem and slide them into place.
   • Secure them using the provided screws and tools. Ensure they are tightened firmly.
3. 초기 청구 : Before first use, fully charge the scooter's battery. Refer to the "Charging" section for detailed instructions.
4. 안전 점검: Before every ride, check the brakes, tire pressure (if applicable, V1 has solid tires), and ensure all bolts and quick releases are tight.

6. 충전

The MAXSHOT V1 Electric Scooter is equipped with a 36V/5.2Ah battery. A full charge takes approximately 3-4 hours.

1. 스쿠터에서 충전 포트를 찾으세요.
2. 충전하기 전에 스쿠터의 전원이 꺼져 있는지 확인하십시오.
3. 충전기를 충전 포트에 연결한 다음 충전기를 일반 벽면 콘센트에 꽂으세요.
4. 충전기의 표시등은 일반적으로 충전 중에는 빨간색으로 바뀌고, 완전히 충전되면 녹색으로 바뀝니다.
5. Once fully charged, disconnect the charger from the wall outlet first, then from the scooter.

중요한: Do not leave the scooter charging unattended for extended periods. Always charge in a well-ventilated area.

그림 6.1: The MAXSHOT V1 offers a 12-mile range on a 3-4 hour charge, ideal for daily commutes.

7. 사용 설명서

전원 켜기/끄기:

• To power on, press and hold the power button on the display panel.
• 전원을 끄려면 디스플레이가 꺼질 때까지 전원 버튼을 다시 길게 누르세요.

스쿠터 타기:

1. Place one foot firmly on the deck and push off with the other foot to gain initial momentum (kick-start).
2. 일단 움직이기 시작하면 엄지손가락으로 가속 레버를 살짝 눌러 가속하십시오.
3. To brake, release the throttle and gently squeeze the brake lever on the handlebar. The scooter features a dual braking system (drum brake and EABS regenerative anti-lock braking) for effective stopping.
4. To activate the headlight, press the headlight button on the display or via the app.

그림 7.1: The scooter's safety features include a bright headlight, taillight, and a responsive dual braking system.

크루즈 컨트롤:

To activate cruise control, maintain a consistent speed for a few seconds. The scooter will beep, and the cruise control icon will appear on the display. To deactivate, press the brake lever or throttle.

8. Vicont App Control

Enhance your riding experience by connecting your MAXSHOT V1 Electric Scooter to the Vicont mobile application.

1. 앱 다운로드: 검색 "Vicont" in your smartphone's app store (iOS or Android) and install it.
2. 편성:
   • 스쿠터 전원이 켜져 있고 스마트폰에서 블루투스가 활성화되어 있는지 확인하십시오.
   • Open the Vicont app and follow the on-screen instructions to search for and connect to your scooter.
3. 앱 기능: The Vicont app allows you to:
   • 스쿠터를 잠그거나 잠금 해제하세요.
   • Set customized maximum speed limits.
   • 헤드라이트를 조절하세요.
   • Activate/deactivate cruise control.
   • Switch between different gear modes.
   • Monitor battery level and riding time.
   • Access fault detection system information.

그림 8.1: The Vicont app provides comprehensive control and monitoring features for your scooter.

9. 접기 및 보관

The MAXSHOT V1 features a one-step folding mechanism for convenient storage and portability.

1. 스쿠터의 전원이 꺼져 있는지 확인하세요.
2. 핸들바 스템 하단의 접이식 잠금장치를 찾으세요.
3. Press the safety button and pull the folding latch to release the stem.
4. Carefully fold the handlebar stem downwards until it clicks into place, securing it to the rear fender.
5. To unfold, reverse the process, ensuring the stem is securely locked in the upright position before riding.

Store the folded scooter in a dry, cool place away from direct sunlight and extreme temperatures.

10. 유지관리

Regular maintenance ensures the longevity and safe operation of your MAXSHOT V1 Electric Scooter.

• 청소: 광고로 스쿠터를 닦으세요amp 천으로 닦으세요. 고압의 물을 사용하거나 스쿠터를 물에 담그지 마세요.
• 브레이크: Regularly check the brake levers and cables for proper function and adjustment. Ensure the brakes respond effectively.
• 타이어: The V1 model uses solid tires, which do not require air pressure checks. Inspect them for wear and tear.
• 패스너: 모든 나사와 볼트가 단단히 조여져 있는지 주기적으로 점검하세요.
• 배터리 관리 : Avoid fully discharging the battery. Charge it regularly, even if not in use, to maintain battery health. Store the scooter with a partial charge (around 50-70%) if storing for extended periods.

11. 문제 해결

이 섹션에서는 스쿠터를 사용하면서 발생할 수 있는 일반적인 문제에 대해 설명합니다.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact MAXSHOT customer support.

12. 사양

13. 보증 및 지원

MAXSHOT provides a comprehensive warranty for your electric scooter.

• 보증 기간: The MAXSHOT V1 Electric Scooter comes with a 365-day (12-month) warranty on various parts, or 180 days depending on the specific component. Please refer to your purchase documentation for detailed warranty terms.
• 고객 지원: For any inquiries, technical assistance, or warranty claims, please contact MAXSHOT customer support. Contact information can typically be found on the MAXSHOT official web사이트 또는 구매 영수증.

알림: Please fully charge the scooter first and then unplug the charger to power it on. Users should regularly check the condition of the battery and charging device, to ensure that the matching battery is used and the correct charging method is used, and avoid charging in an unventilated or flammable environment.