URPIZY LED Ceiling Fan Remote Control with DC Inverter Motor Instruction Manual

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your URPIZY LED Ceiling Fan Remote Control system. Please read this manual thoroughly before use to ensure proper function and safety.

중요한 안전 정보

• 설치나 유지관리를 하기 전에 전원이 꺼져 있는지 확인하세요.
• 설치는 자격을 갖춘 전기 기술자가 수행해야 합니다.
• Do not expose the remote control or receiver to moisture or extreme temperatures.
• Use only with compatible LED ceiling fans with DC inverter motors.

제품 끝view

The URPIZY LED Ceiling Fan Remote Control system consists of two main components: the remote control unit and the receiver unit.

원격 제어 장치

This image shows the URPIZY LED Ceiling Fan Remote Control. It features buttons for light control, fan speed adjustment, color temperature settings, and a timer function.

수신기 유닛

This image displays the URPIZY LED Ceiling Fan Receiver Unit. This unit connects to the ceiling fan and power supply, receiving signals from the remote control to operate the fan and light.

Remote Control and Receiver Together

This image illustrates both the URPIZY LED Ceiling Fan Remote Control and its corresponding receiver unit, demonstrating their relative sizes.

설정 및 설치

1. 전원 차단: Before beginning installation, ensure the main power supply to the ceiling fan is turned off at the circuit breaker.
2. 수신기 배치: Install the receiver unit inside the ceiling fan canopy. Ensure there is adequate space and that the receiver is not pinched or damaged.
3. 배선 연결:
   • Connect the L (Live) and N (Neutral) wires from the household power supply to the corresponding L/N input terminals on the receiver.
   • Connect the fan motor wires (typically Live, Neutral, and Ground) to the FAN OUT terminals on the receiver.
   • Connect the LED light wires to the LED OUT terminals on the receiver.
   • Refer to the wiring diagram on the receiver unit for precise connections.
4. 보안 연결: 모든 전선 연결이 안전하고 적절하게 절연되어 있는지 확인하세요.
5. Canopy Reassembly: Carefully reassemble the ceiling fan canopy, ensuring no wires are pinched.
6. 전원 복원: Restore power to the ceiling fan at the circuit breaker.
7. 원격 페어링(필요한 경우): Some units may require pairing. Typically, this involves pressing a "SETUP" or "PAIR" button on the remote or receiver within a few seconds of restoring power. Refer to specific instructions on the receiver or remote if pairing is needed.

This image shows the URPIZY LED Ceiling Fan Remote Control alongside its receiver, highlighting the wiring connections on the receiver unit.

작동 지침

The remote control allows you to manage your ceiling fan and light settings.

• 조명 켜기/끄기: Press the "Light Switch" button to turn the light on or off.
• 밝기 조정: Use the "Brightness +" and "Brightness -" buttons to increase or decrease the light intensity.
• 색온도 조정: Use the "Color Temp +" and "Color Temp -" buttons to adjust the light color from cool white to warm white.
• 팬 속도 제어: Buttons labeled "1", "2", "3", "4", "5", "6" control the fan speed from lowest (1) to highest (6).
• 팬 켜기/끄기: Press the "Total Off" button to turn off the fan.
• 타이머 기능: Press the "Timer" button to set a timed shutdown for the fan. Specific timer intervals (e.g., 1 hour, 3 hours, 6 hours) may be indicated on the remote.
• Setup/Pairing: The "SETUP" button is typically used for pairing the remote with the receiver.

유지

관리 및 청소

• 청소: 리모컨과 수신기를 부드럽고 마른 천으로 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
• 배터리 교체: If the remote control's range decreases or it stops responding, replace the batteries. Ensure correct polarity.
• 저장: Store the remote in a dry place away from direct sunlight when not in use for extended periods.

문제 해결

일반적인 문제 및 솔루션

명세서

기술 데이터

• 제품 이름: Fan Light Control
• 재료: ABS
• LED 출력 전력: (25-36) x 2, (50-75) x 2 220V
• 입력 Voltage: 170-265V, 50/60Hz
• 치수: 18 x 5 x 4 cm (Remote Control)
• 품목 무게: 80 grams (Remote Control)
• 모델: K0D67CHQ96Z96M1QFEC8LK8WV7

보증 및 지원

For warranty details and customer support, please refer to the product packaging or contact your retailer.