iCarsoft DE V4.0 Full System Bidirectional Diagnostic Scan Tool User Manual

1. 제품 오버view

The iCarsoft DE V4.0 is a full-system bidirectional diagnostic scan tool designed for most Mercedes-Benz, BMW, V.A.G (Volkswagen, Audi, Bentley, Bugatti, Seat, MAN LD, Skoda, Lamborghini), and Porsche manufacturing group car models from 1996-2023. This tool provides comprehensive vehicle diagnostics, powerful bidirectional control, and a wide range of reset services.

주요 특징은 다음과 같습니다.

• Full System Diagnosis: Detects faults across all vehicle systems.
• Bidirectional Control: Sends commands to components for testing.
• Up to 42 Reset Services: Supports various maintenance and reset functions.
• Full OBD2 Functions: Includes reading/clearing codes, live data, I/M readiness, O2 sensor tests, and more.
• Auto VIN: Automatically identifies vehicle information.
• Lifetime Free Software Updates.

이미지: 이상view of iCarsoft DE V4.0 capabilities, highlighting supported car models and available reset services.

2. 안전 정보

Please read and understand all safety instructions before operating the iCarsoft DE V4.0 diagnostic tool. Failure to follow these instructions may result in injury or damage to the device or vehicle.

• Always perform diagnostic tests in a well-ventilated area.
• 안전 안경 등 적절한 개인 보호 장비를 착용하세요.
• Ensure the vehicle is in Park (P) or Neutral (N) with the parking brake engaged before connecting or operating the tool.
• 뜨거운 엔진 부품이나 움직이는 부품과의 접촉을 피하십시오.
• 운전 중에는 도구를 작동하지 마십시오.
• Keep the tool dry and away from liquids.
• Do not attempt to disassemble or modify the tool.
• Refer to your vehicle's service manual for specific diagnostic procedures and safety precautions.

3. 설정 및 초기 사용

3.1 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• iCarsoft DE V4.0 Diagnostic Tool
• OBD2 케이블
• USB 케이블
• 전원 어댑터
• 사용 설명서 (본 문서)
• 운반 케이스

Image: Contents included in the iCarsoft DE V4.0 package.

3.2 차량에 연결하기

1. Locate the vehicle's 16-pin Data Link Connector (DLC), typically under the dashboard on the driver's side.
2. 차량의 시동이 꺼져 있는지 확인하십시오.
3. Connect the OBD2 cable to the vehicle's DLC.
4. Connect the other end of the OBD2 cable to the iCarsoft DE V4.0 tool.
5. Turn the vehicle's ignition to the ON position (engine off). The tool should power on automatically.

3.3 초기 소프트웨어 업데이트

It is recommended to perform a software update upon first use to ensure the tool has the latest vehicle coverage and functions. The iCarsoft DE V4.0 offers lifetime free software updates.

1. Connect the tool to a Wi-Fi network (2.4GHz supported).
2. 메인 메뉴에서 '업데이트' 아이콘을 클릭하세요.
3. 화면의 지시에 따라 사용 가능한 업데이트를 다운로드하고 설치하세요.

3.4 차량 호환성 확인

Due to differences in protocols and unique systems/ECUs across vehicle models, not all listed services may be available for every specific vehicle. It is crucial to check compatibility before purchasing or performing specific functions.

Image: Instructions for checking vehicle compatibility on the iCarsoft web대지.

To check compatibility:

• Method 1: Direct URL
  방문하다 icarsoft.com/Function/190.html. Select DE V4.0 device, then your car brand, and check compatibility.
• Method 2: Official Website Navigation
  이동하다 icarsoft.com, select 'Support & Update', then 'Function List'. Choose 'Professional Multi-brand Multi-system Car Diagnostic Tools' and DE V4.0. Select your car brand and check compatibility.

4. 사용 설명서

The iCarsoft DE V4.0 features a 5-inch LCD touchscreen and an Android operating system for intuitive navigation.

4.1 전체 시스템 진단

This function allows for an in-depth scan of all electronic control units (ECUs) within the vehicle, including Engine, ABS, SRS (Airbag), Transmission, EPB (Electronic Parking Brake), BMS (Battery Management System), HVAC (Heating, Ventilation, and Air Conditioning), AC, EPS (Electric Power Steering), Gateway, and Body systems. It detects faults and provides detailed analysis.

Image: Visual representation of the tool performing OE-level all system diagnostics.

4.2 양방향 제어(능동 테스트)

The bidirectional control feature allows the tool to send commands to various vehicle components and systems to test their functionality. This helps in quickly identifying faulty components without manual intervention.

Examples of supported active tests include:

• 인젝터 테스트
• 연료 펌프 테스트
• Idle Air Control Valve Test
• Ignition Coil Test
• ABS 펌프 모터 테스트
• EV-AP Valve Test
• Throttle Position Actuator Test
• 냉각 팬 테스트
• HVAC Test
• A/C Compressor Test
• ETC Actuator Test
• Window Test
• 헤드라이트 테스트
• 와이퍼 테스트
• 도어록 테스트
• Horn Test

Image: The tool performing bidirectional tests on various vehicle components.

4.3 서비스 재설정

The tool provides up to 42 reset services, enabling proper functioning after component replacement. Specific services vary by vehicle manufacturer group:

• Mercedes-Benz Group (MB, Sprinter, Smart, Maybach): Up to 38 services including Oil Reset, EPB, ETC, D.P.Filter reset, ABS bleeding, Injector Coding, TPMS reset, BMS, SAS, SPS reset, ACS reset, LAP reset, BSC reset, ECM reset, TCM reset, SIT reset, IDL reset, and more.
• BMW Group (BMW, MINI, Rolls-Royce): Up to 14 maintenance services.
• V.A.G Group (VW, Audi, Bentley, Bugatti, Seat, MAN LD, SKODA, Lamborghini): Up to 40 maintenance services.
• Porsche Group: Up to 27 services.

4.4 전체 OBD2 기능

The iCarsoft DE V4.0 supports all 10 modes of OBD2 testing, essential for emissions-related diagnostics and general engine health checks:

• 코드 읽기: 진단 문제 코드(DTC)를 검색합니다.
• 명확한 코드: DTC를 지우고 오작동 표시등 L을 끕니다.amp (밀).
• 라이브 데이터 스트림: Displays real-time data parameters in text or graph format (up to 118 data streams).
• 프레임 데이터 고정: 오류 코드가 설정된 시점의 엔진 상태를 보여줍니다.
• I/M 준비: 배출 관련 모니터의 상태를 확인합니다.
• O2 센서 테스트 : O2 센서 모니터링 테스트 결과를 검색합니다.
• 온보드 모니터 테스트: 배출가스 관련 동력전달장치 부품 및 시스템에 대한 결과를 검색합니다.
• EVAP 시스템 테스트: 증발 배출 시스템 테스트를 시작합니다.
• 차량 정보: Retrieves VIN, Cal ID, CVN.
• DTC 조회: 일반 코드와 제조업체별 코드에 대한 정의를 제공합니다.
• 배터리 테스트: 차량 배터리 전압을 모니터링합니다.tage.

Image: All-in-One OBD2 functions with battery test.

4.5 추가 기능

• 자동차 VIN: Automatically identifies vehicle information for faster diagnosis.
• 진단 기록: Records past diagnostic sessions for review.
• 데이터 기록 및 재생: 녹화 및 재생을 허용합니다viewing of live data streams.
• Print & Share: Enables printing or sharing of diagnostic reports.
• 다국어 지원: Supports over 15 languages.

Image: More user-friendly add-on features of the diagnostic tool.

5. 유지관리

5.1 장치 관리

• Keep the tool clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the tool to extreme temperatures, humidity, or direct sunlight.
• Store the tool in its protective carrying case when not in use.
• 장치에 연마성 세척제나 용제를 사용하지 마십시오.

5.2 소프트웨어 업데이트

Regularly update the software to ensure optimal performance, expanded vehicle coverage, and access to new features. Updates are free for the lifetime of the product.

1. Connect the tool to a stable internet connection via Wi-Fi.
2. Access the 'Update' function from the main menu.
3. Follow the on-screen prompts to download and install the latest software versions.

6. 문제 해결

If you encounter issues with your iCarsoft DE V4.0, refer to the following common solutions:

6.1 Tool Does Not Power On

• Ensure the OBD2 cable is securely connected to both the vehicle's DLC and the tool.
• 차량의 시동 스위치가 ON 위치(엔진 꺼짐)에 있는지 확인하십시오.
• 차량 배터리 용량을 확인하세요tage. The tool requires sufficient power from the vehicle.
• If using the power adapter, ensure it is connected to a working power source and the tool.

6.2 차량과의 통신 오류

• Confirm the OBD2 cable is properly connected.
• 차량의 시동이 켜져 있는지 확인하십시오.
• Verify that the vehicle model and year selected on the tool match your vehicle.
• 차량의 OBD2 포트 회로에 끊어진 퓨즈가 있는지 확인하십시오.
• Refer to the compatibility check section (3.4) to ensure your vehicle and desired functions are supported.

6.3 부정확하거나 누락된 데이터

• Ensure the tool's software is up to date.
• Verify the correct vehicle information has been entered or automatically detected.
• Some data parameters may not be supported by all vehicle ECUs.

6.4 Tool Freezes or Responds Slowly

• Restart the tool by disconnecting and reconnecting it from the vehicle.
• Ensure there is sufficient internal storage space if recording large amounts of data.
• 소프트웨어 업데이트를 수행합니다.

7. 사양

Image: Detailed hardware specifications of the iCarsoft DE V4.0.

8. 보증 정보

The iCarsoft DE V4.0 diagnostic tool comes with a 1년 보증 from the date of purchase. Additionally, iCarsoft offers lifetime hardware free repair 이 제품에 대해서.

This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper maintenance.

For warranty claims or repair services, please contact iCarsoft customer support.

9. 고객 지원

For technical assistance, compatibility inquiries, or any questions regarding the iCarsoft DE V4.0 diagnostic tool, please contact iCarsoft customer support.

• 호환성 확인: If you are unsure about specific functions or vehicle compatibility, it is recommended to contact iCarsoft support with your car's VIN and the required service before purchase or use.
• 온라인 리소스: Visit the official iCarsoft web사이트 (icarsoft.com) for FAQs, software updates, and additional support materials.