소개
This manual provides essential instructions for the setup, operation, and maintenance of your DIGITNOW M485 Belt Drive Turntable. Designed for vinyl enthusiasts, this turntable features a high-quality magnetic cartridge, adjustable counterweight, built-in phono pre-amplifier, and versatile connectivity options including Bluetooth output and USB digital output. Please read this manual thoroughly before use to ensure proper function and longevity of your device.
상자 안에 무엇이 들어있나요?
모든 구성품을 조심스럽게 풀어서 다음 품목이 있는지 확인하세요.
- Wooden Turntable Converter (Main Unit)
- 전원 어댑터
- 더스트 커버
- 톤암 카운터 웨이트
- 안티 스케이팅 무게
- Platter (with drive belt included)
- 45RPM 어댑터
- Vinyl Anti-slip Mat
- 카트리지 정렬 각도기
- USB 케이블
- 사용자 설명서
Image: All components included in the DIGITNOW M485 Belt Drive Turntable package, laid out for identification.
설치 지침
Follow these steps to set up your turntable for the first time. For a visual guide, please refer to the installation video below.
- 플래터 및 드라이브 벨트 설치: Carefully place the turntable platter onto the spindle. Locate the drive belt (pre-installed on the platter or included separately) and gently stretch it around the motor pulley. Ensure the belt is not twisted.
- 미끄럼 방지 매트 배치: Place the vinyl anti-slip mat on top of the platter.
- Counterweight and Anti-Skating Setup:
a. Attach the tonearm counterweight to the rear of the tonearm. Rotate it until the tonearm floats freely and is balanced horizontally.
b. Adjust the counterweight to the recommended tracking force for the AT3600L cartridge (typically 3.5 grams). Refer to the cartridge alignment protractor for precise adjustment.
c. Attach the anti-skating weight by placing its loop on the third notch of the standing hook. This helps prevent the stylus from skipping.
이미지: 클로즈업 view of the tonearm, showing the adjustable counterweight and the anti-skating fishing line mechanism.
이미지: 상세 view of the Audio Technica AT3600L magnetic cartridge stylus, positioned over a vinyl record.
- 먼지 커버 설치: Insert the hinge pockets of the dust cover into the hinges located at the rear of the turntable.
- 전원 연결: Connect the DC power adapter to the DC 12V jack on the rear of the turntable and plug it into a wall outlet.
- 초기 전원 켜기: 뒷면 패널의 전원 스위치를 'ON' 위치로 돌리십시오.
설정 비디오 가이드
Video: This official seller video demonstrates the step-by-step installation process for the DIGITNOW Belt-Drive Turntable, including platter, belt, counterweight, and dust cover setup.
작동 지침
비닐 레코드 재생
- Place a vinyl record on the slip mat.
- Select the appropriate speed (33 or 45 RPM) using the speed selector knob. Use the 45 RPM adapter for 7-inch singles if needed.
- 큐잉 레버를 사용하여 톤암을 들어 올리십시오.
- 레코드판의 원하는 트랙 위에 스타일러스를 조심스럽게 위치시키세요.
- 큐잉 레버를 사용하여 톤암을 천천히 내리십시오. 그러면 레코드가 재생되기 시작합니다.
- To stop playback, lift the tonearm, return it to the tonearm rest, and press the 'STOP' button.
Image: Close-up of the turntable's control panel, showing the 33/45 RPM speed selector and the START/STOP buttons.
Bluetooth Output Connection
The turntable can transmit audio wirelessly to Bluetooth speakers or headphones.
- 블루투스 스피커 또는 헤드폰이 페어링 모드인지 확인하십시오.
- Press the 'BT' button on the turntable. The Bluetooth indicator light will flash, indicating it is searching for devices.
- Once connected, the Bluetooth indicator light will remain solid blue. You can now play records and stream audio to your paired Bluetooth device.
Image: The DIGITNOW M485 turntable wirelessly connected to a Bluetooth speaker, demonstrating its wireless audio output capability.
RCA Output to Active Speakers
Connect the turntable to active (powered) speakers or an amplifier using the RCA cables for a wired audio experience.
- Connect the RCA cables (red for right, white for left) from the turntable's RCA jacks to the corresponding input jacks on your active speakers or amp리퍼.
- Ensure the PHONO/LINE OUT switch on the rear of the turntable is set to the appropriate position (PHONO if connecting to a phono input on an amplifier, LINE if connecting to a standard auxiliary input).
- Power on your speakers/amplifier and the turntable, then begin playing a record.
Image: The DIGITNOW M485 turntable connected via RCA cables to a pair of active speakers, illustrating wired audio output.
Image: Close-up of the turntable's rear panel, highlighting the DC 12V power input, USB-PC port, RCA output jacks, and the PHONO/LINE OUT switch.
USB Digital Output (Recording)
You can digitize your vinyl collection by connecting the turntable to a computer via USB.
- Connect the turntable to your computer using the provided USB cable.
- Install audio recording software (e.g., Audacity) on your computer.
- Follow the software's instructions to record audio from the turntable.
제품 끝view 동영상
Video: This official seller video provides a general overview of the DIGITNOW Belt Drive Turntable, demonstrating its key features and basic operation.
유지
정기적인 유지보수는 최적의 성능을 보장하고 턴테이블의 수명을 연장시켜 줍니다.
- 스타일러스 청소: Gently clean the stylus regularly using a soft brush designed for turntable styli. Always brush from back to front.
- Dust Cover and Unit Cleaning: Use a soft, dry, lint-free cloth to clean the dust cover and the turntable unit. Avoid abrasive cleaners or solvents.
- 벨트 검사: Periodically check the drive belt for wear or stretching. Replace if necessary to maintain consistent playback speed.
- 기록 관리: Keep your vinyl records clean and free of dust to prevent damage to both the records and the stylus.
문제 해결
문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 사운드 출력이 없습니다 | Power not connected; Speakers not connected or powered; PHONO/LINE switch incorrect; Stylus guard still on. | Ensure power adapter is connected and unit is ON. Check speaker connections and power. Set PHONO/LINE switch correctly. Remove stylus guard. |
| 소리가 끊기거나 왜곡됨 | Incorrect counterweight/anti-skating setting; Dirty or worn stylus; Dirty or damaged record. | Re-adjust counterweight and anti-skating. Clean or replace stylus. Clean record or try a different one. |
| 블루투스 페어링 문제 | Device not in pairing mode; Too far from turntable; Interference. | Ensure Bluetooth device is in pairing mode. Move device closer to turntable. Reduce other wireless interference. |
| 재생 속도가 잘못되었습니다 | Wrong speed selected; Drive belt issues. | Select correct 33/45 RPM speed. Check drive belt for proper placement or wear. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 디지트나우 |
| 모델명 | Belt Drive Turntable for Vinyl Record Player |
| 제조 부품 번호 | M485-블랙 |
| 색상 | 검은색 |
| 재료 | 목재 |
| 스타일 | 레트로 |
| 모터 유형 | 직류 모터 |
| 최대 회전 속도 | 45 RPM |
| 재생 속도 | 33 1/3, 45RPM |
| 특징 | Adjustable Counterweight Force and advanced anti-skating system |
| 호환 장치 | Bluetooth Speakers/Active Speakers (Not compatible with passive speakers) |
| 입력 | Phono & Line input |
| 산출 | RCA output/USB |
| 전원 | 코드식 전기 |
| 권tage | 12 볼트 |
| 전력 소비 | 6 와트 |
| 신호 형식 | 비슷한 물건 |
| 신호 대 잡음 비율 | 40데시벨 |
| 품목 치수 L x W x H | 18.9인치 길이 x 16.14인치 너비 x 7인치 높이 |
보증 및 지원
Your DIGITNOW M485 Belt Drive Turntable comes with a 2년 보증 구매일로부터 적용됩니다. 이 보증은 제조상의 결함을 보장하며, 정상적인 사용 환경에서 제품이 의도한 대로 작동함을 보장합니다.
For technical support, warranty claims, or any questions regarding your turntable, please contact DIGITNOW customer service through their official website or the retailer where the product was purchased. Please have your model number (M485) and proof of purchase ready when contacting support.