Feit Electric 9-inch Adjustable White LED Ceiling Light Instruction Manual

1. 서론

구매해주셔서 감사합니다asing the Feit Electric 9-inch Adjustable White LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

This flush mount fixture features a brushed nickel finish, integrated dimmable LEDs, and selectable color temperature settings (2700K, 3000K, 4000K, 5000K, 6500K). It delivers 900 lumens of light and has an estimated lifespan of 50,000 hours.

Image 1.1: Packaging of the Feit Electric 9-inch LED Ceiling Light, highlighting key features like wattage, lumens, dimmability, and adjustable white light settings.

2. 안전 정보

경고: To avoid electric shock, always turn off the main power at the circuit breaker or fuse box before installing or servicing this fixture. Do not attempt installation if you are not familiar with electrical wiring. Consult a qualified electrician.

• 설치하기 전에 모든 지침을 읽으세요.
• Ensure all electrical connections are made according to local codes and ordinances, as well as the National Electric Code (NEC).
• Do not use with a standard dimmer switch unless it is specifically rated for LED fixtures.
• 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전상의 위험이 발생할 수 있습니다.
• 이 조명기구는 실내용으로만 제작되었습니다.

3. 패키지 내용

아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하십시오.

• Feit Electric 9-inch LED Ceiling Light Fixture (1)
• 장착 하드웨어(나사, 와이어 너트)
• 사용 설명서(본 문서)

4. 사양

Image 4.1: Visual representation of the fixture's dimensions and key electrical specifications.

5. 설정(설치)

Follow these steps to properly install your Feit Electric LED Ceiling Light. Ensure power is OFF before proceeding.

1. 전원 끄기: Locate the circuit breaker controlling the light fixture's location and switch it to the OFF position. Verify power is off using a voltag전자 테스터.
2. 장착 표면 준비: Remove your existing fixture. Ensure the junction box is securely mounted and capable of supporting the new fixture.
3. 장착 브래킷 부착: Secure the provided mounting bracket to the junction box using the screws included in the hardware kit.
4. 전기 연결을 만드십시오: Connect the wires from the fixture to the wires from the junction box. Use the provided wire nuts:
   • 조명기구의 검은색 전선(활선)을 접속함의 검은색 전선(활선)에 연결하십시오.
   • 조명기구에서 나오는 흰색 전선(중성선)을 접속함에서 나오는 흰색 전선(중성선)에 연결하십시오.
   • Connect the green or bare copper wire (Ground) from the fixture to the ground wire from the junction box.
   모든 연결이 안전한지 확인하세요.
5. Select Color Temperature (Pre-installation): Before mounting the fixture flush, locate the CCT (Correlated Color Temperature) switch on the back of the fixture. Select your desired color temperature (2700K, 3000K, 4000K, 5000K, or 6500K). This can be changed later, but it's easier to set before final mounting.
6. 고정장치 장착: Carefully tuck all wires into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the ceiling.
7. 복원력 : 회로 차단기에서 전원을 다시 켜세요.

이미지 5.1: 상단 view of the fixture, illustrating the mounting points for installation.

이미지 5.2: 하단 view of the fixture, clearly showing the integrated switch for selecting color temperature.

6. 사용 설명서

Your Feit Electric LED Ceiling Light is designed for simple operation.

6.1. 색온도 선택

The fixture features an integrated switch on the back that allows you to choose from five color temperature settings: Soft White (2700K), Bright White (3000K), Cool White (4000K), Daylight (5000K), and Daylight Deluxe (6500K).

• To change the color temperature, turn off the power to the fixture.
• Carefully remove the fixture from the ceiling (if already installed) or access the back of the fixture.
• 원하는 색온도 설정으로 스위치를 밀어 넣으세요.
• Re-install the fixture (if removed) and restore power.

Alternatively, if the fixture is already installed, you can cycle through the color temperatures by quickly toggling your wall light switch OFF and ON. The fixture will remember the last selected setting if left OFF for more than 10 seconds.

Image 6.1: Illustration of the five selectable color temperature options and how to choose them using the integrated switch.

6.2. 디밍 기능

This fixture is dimmable. To utilize the dimming feature, you must connect it to a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.

7. 유지관리

The Feit Electric LED Ceiling Light requires minimal maintenance.

• 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 부드럽고 마른 천이나 약간 젖은 천으로 조명 기구를 닦으십시오.amp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
• 전구 교체: The LEDs in this fixture are integrated and not replaceable. The fixture is designed for a long lifespan of 50,000 hours.
• 사용자가 수리할 수 없는 부품: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the fixture yourself.

8. 문제 해결

조명기구 사용에 문제가 발생하면 다음 문제 해결 가이드를 참조하십시오.

9. 보증 및 지원

This Feit Electric product is warranted to be free from defects in workmanship and materials for 3년 from the date of purchase. If the product fails within the warranty period, please contact Feit Electric for replacement or refund.

For 24/7 customer support, please visit the Feit Electric help center:

help.feit.com/hc/en-us

Image 9.1: Customer support details, including the web도움이 필요한 경우 사이트를 방문하세요.