CREWORKS MLMN210EU 750W 미니 금속 선반 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your CREWORKS MLMN210EU 750W Mini Metal Lathe. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

1.1개 제품 이상view

The CREWORKS MLMN210EU is a compact yet powerful mini metal lathe designed for small to medium-scale precision work on various materials, including metal and wood. It features a 750W motor, a 3-jaw chuck, a digital display for speed monitoring, and a 4-way tool post, offering versatility for turning, cutting, drilling, and threading operations. With a 210 mm (8.3 inch) swing over bed and 400 mm (15.7 inch) distance between centers, it accommodates a range of projects.

이미지 1.1: The CREWORKS MLMN210EU Mini Metal Lathe shown with its various included accessories, such as wrenches, screwdrivers, chuck keys, and gear sets.

1.2 안전 지침

Always prioritize safety when operating machinery. Failure to follow safety guidelines can result in serious injury or damage to the equipment.

• 작동 전에 설명서 전체를 읽고 이해하십시오.
• Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable clothing. Avoid loose clothing, jewelry, and long hair.
• 작업 공간이 깨끗하고, 조명이 밝으며, 방해물이 없는지 확인하세요.
• Never operate the lathe under the influence of drugs, alcohol, or medication that impairs judgment.
• 유지보수, 조정 또는 액세서리 교체를 하기 전에 항상 전원을 차단하십시오.
• Securely fasten the workpiece in the chuck or collet.
• 기계가 작동하는 동안 무인 상태로 두지 마십시오.
• 손과 손가락을 움직이는 부분에 가까이 두지 마세요.
• Use the correct tools and attachments for the task.
• Ensure proper ventilation to dissipate fumes and dust.

2. 패키지 내용

제품을 개봉하신 후 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 누락되거나 손상된 품목이 있는 경우 즉시 공급업체에 연락하십시오.

• CREWORKS MLMN210EU Mini Metal Lathe
• 3-Jaw Chuck (125mm)
• 도구 포스트
• Set of Change Gears
• Wrenches and Hex Keys
• 드라이버
• 오일 캔
• 척 키
• 사용 설명서
• 공구함 (액세서리용)

이미지 2.1: The main unit of the lathe along with the various tools and components included in the package, such as the chuck, gears, and hand tools.

3. 설정 및 설치

3.1 포장 풀기 및 배치

1. 선반과 모든 부속품을 포장에서 조심스럽게 꺼내십시오.
2. Clean any protective grease or oil from the machine surfaces using a suitable degreaser.
3. Place the lathe on a sturdy, level workbench capable of supporting its weight (approximately 61 kg).
4. 안전한 작동 및 유지보수를 위해 기계 주변에 충분한 공간이 확보되어 있는지 확인하십시오.

3.2 전기 연결

• 전원 공급 장치의 볼륨을 확인하십시오.tage matches the requirements specified on the machine's nameplate (typically 220-240V AC).
• 전원 코드를 접지된 전기 콘센트에 연결합니다.
• 꼭 필요한 경우가 아니면 연장 코드를 사용하지 마시고, 사용하시는 기기의 전력 요구 사항에 맞는 정격 용량의 연장 코드를 사용하십시오.

3.3 초기 점검

• 모든 패스너가 조여졌는지 확인하십시오.
• Lubricate all moving parts as indicated in the maintenance section.
• Ensure the chuck is securely mounted.

4. 사용 설명서

This section details the controls and basic operations of the CREWORKS MLMN210EU mini metal lathe.

4.1 컨트롤 및 구성 요소

• 디지털 디스플레이: Shows the current spindle speed (RPM).
• 속도 조절 손잡이: Adjusts the spindle speed continuously from 0 to 2500 RPM.
• 비상 정지 버튼: 기계의 전원을 즉시 차단합니다.
• 척: Holds the workpiece.
• 도구 게시물: Holds the cutting tool.
• 캐리지 핸드휠: 침대를 따라 캐리지를 이동시킵니다.
• 크로스 슬라이드 핸드휠: 가로 슬라이드를 침대에 수직으로 이동시킵니다.
• 복합 휴식 핸드휠: Moves the compound rest at an angle.
• 테일스톡 핸드휠: Advances the tailstock quill.

이미지 4.1: 클로즈업 view of the digital display showing spindle speed and the speed control knob, allowing for precise adjustments up to 2500 RPM.

이미지 4.2: Illustration of the various handwheels for controlling the movement of the bed carriage, cross slide, compound rest, and tailstock feed, along with the digital speed display.

4.2 공작물 Clamping (3-Jaw Chuck)

The 125mm 3-jaw chuck is designed to securely hold cylindrical and hexagonal workpieces.

1. Insert the chuck key into the chuck.
2. Rotate the chuck key to open the jaws sufficiently to insert the workpiece.
3. Insert the workpiece and tighten the jaws firmly using the chuck key. Ensure the workpiece is centered and held securely.
4. Always remove the chuck key before starting the lathe.

이미지 4.3: Detailed diagram illustrating the internal and external jaw configurations of the 125mm 3-jaw chuck, with clamping ranges for various workpiece sizes.

4.3 기본 작업

The CREWORKS MLMN210EU is capable of various machining operations:

• 선회: Reducing the diameter of a workpiece.
• 교련: Creating holes in the workpiece using the tailstock.
• 스레딩: Cutting internal or external threads. This requires setting up the appropriate change gears according to the thread cutting table (refer to the machine's label).
• 깃 달기: Creating a flat surface on the end of a workpiece.
• Parting: Cutting off a section of the workpiece.

이미지 4.4: Visual representation of the diverse applications possible with the mini metal lathe, including metal turning, drilling, threading, polishing, and woodworking.

5. 유지관리

Regular maintenance is crucial for the longevity and optimal performance of your lathe.

5.1 청소

• After each use, clean chips and debris from the machine bed, carriage, and chuck. Use a brush or shop vacuum; never use compressed air as it can embed chips into moving parts.
• 깨끗한 천으로 모든 표면을 닦으세요.

5.2 윤활

• Regularly lubricate the lead screw, guide rails, and other moving parts with appropriate machine oil.
• Check the gearbox oil level periodically and replenish if necessary.

이미지 5.1: The double V-shaped guide rails, which require regular cleaning and lubrication for smooth and precise operation.

이미지 5.2: The robust metal gear set, designed for strong and efficient power transmission, which should be inspected periodically for wear and lubricated.

5.3 검사

• Inspect the drive belts for wear or damage. Replace if necessary.
• Check the condition of the cutting tools. Sharpen or replace dull tools.
• 모든 전기 연결이 안전하고 손상이 없는지 확인하세요.

6. 문제 해결

이 섹션에서는 선반에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.

For issues not listed here or if solutions do not resolve the problem, contact CREWORKS customer support or a qualified technician.

7. 사양

Technical specifications for the CREWORKS MLMN210EU Mini Metal Lathe.

이미지 7.1: A visual summary of the lathe's technical data and key dimensions, including power, swing, and spindle speed.

8. 보증 및 지원

For warranty information, technical support, or to order replacement parts, please contact CREWORKS customer service. Keep your purchase receipt and product model number (MLMN210EU) handy when contacting support.

Refer to the official CREWORKS web최신 보증 조건 및 연락처 정보는 웹사이트 또는 구매 서류를 참조하십시오.