1. 서론
Welcome to the Dyness 12V 100Ah LiFePO4 Deep Cycle Battery user manual. This document provides essential information for the safe and efficient use of your battery. It is designed for various applications including RVs, marine systems, off-grid solar installations, and backup power. Please read this manual thoroughly before installation and operation.
2. 안전 정보
WARNING: Failure to follow these safety instructions may result in serious injury, property damage, or death.
- Always wear appropriate personal protective equipment (PPE), including eye protection and insulated gloves, when handling batteries.
- Do not short-circuit the battery terminals. This can cause severe arcing, fire, or explosion.
- 배터리를 열원, 화염 및 인화성 물질로부터 멀리하십시오.
- Do not disassemble, puncture, drop, or damage the battery. Internal components are hazardous.
- Ensure proper ventilation during charging and operation to prevent heat buildup.
- Use only compatible chargers specifically designed for LiFePO4 batteries (e.g., a 14.6V 20A lithium-ion charger). Using an incompatible charger can damage the battery or cause a fire.
- Avoid charging or discharging the battery outside the specified temperature ranges. The integrated BMS will provide protection, but external conditions should be monitored.
- 화재 발생 시 D급 소화기를 사용하십시오. 물은 리튬 화재를 악화시킬 수 있습니다.
- 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
- Do not connect the battery to a load or charger if it shows signs of damage, swelling, or leakage.
3. 제품 오버view
The Dyness 12V 100Ah LiFePO4 Deep Cycle Battery is a high-performance energy storage solution. It features Grade A+ lithium iron phosphate cells, offering a long cycle life and stable voltage output for reliable power.
주요 특징:
- Advanced 100A BMS: An integrated Battery Management System provides comprehensive protection against overcharge, over-discharge, over-current, short-circuit, and extreme temperatures.
- 저온 보호: Charging automatically stops below 0°C (32°F), and discharging stops below -20°C (-4°F) to ensure safety and prolong battery life.
- 연장된 사이클 수명: Designed for over 4,000 deep charge-discharge cycles, with minimal capacity loss, and up to 15,000 cycles under specific conditions.
- 낮은 자가방전율: Approximately 1-2% per month, significantly lower than lead-acid batteries, allowing for easier storage.
- 확장 가능한 디자인: Up to 16 battery modules can be connected (4 in series x 4 in parallel) to achieve a maximum system capacity of 51.2V and 400Ah (20,480 Wh).
- 가벼움: Weighs only 9.9 kg, approximately one-third the weight of comparable lead-acid batteries.
Image: Internal structure highlighting Grade A+ cells and the impressive 4000+ cycle life.
Image: Comparison of Dyness LiFePO4 battery with traditional AGM/SLA batteries, showing benefits in weight, capacity, and lifespan.
4. 설정
4.1 풀기 및 검사
Carefully remove the battery from its packaging. Inspect the battery for any signs of physical damage, such as cracks, dents, or swelling. If any damage is observed, do not proceed with installation and contact customer support immediately.
4.2 초기 충전
It is recommended to fully charge the battery before its first use to ensure optimal performance and calibration of the Battery Management System (BMS).
4.3 연결
Ensure all connections are secure and properly tightened to prevent resistance and potential hazards.
- Connect the positive (+) terminal of the battery to the positive (+) terminal of your load/charger.
- Connect the negative (-) terminal of the battery to the negative (-) terminal of your load/charger.
For Multiple Batteries:
- 병렬 연결: To increase total capacity (Ampere-hours) while maintaining the nominal voltage (12.8V), connect positive terminals together and negative terminals together.
- 직렬 연결: To increase total voltage, connect the positive terminal of one battery to the negative terminal of the next battery.
The Dyness 12V 100Ah battery supports connecting up to 16 modules (4 in series x 4 in parallel) for a maximum system of 51.2V 400Ah (20,480 Wh).
Image: Illustration of connecting multiple batteries for scalable energy storage, up to 16 modules.
4.4 Recommended Charger
Use a 14.6V 20A lithium-ion charger or connect to solar panels/generators with a rated power of ≥400W for optimal charging performance.
5. 사용 설명서
5.1 정상 작동
The battery is designed for deep cycle applications, providing stable power output for extended periods. Monitor your system's voltage and current to ensure it operates within the battery's specifications.
5.2 온도 고려 사항
The integrated BMS actively protects the battery from extreme temperatures:
- 충전 차단: Charging will automatically cease if the battery temperature drops below 0°C (32°F).
- 방전 차단: Discharging will automatically cease if the battery temperature drops below -20°C (-4°F).
- Charging Resumption: Charging resumes when the temperature rises above 5°C (41°F).
These features ensure the battery's longevity and safe operation in various climates.
Image: Explanation of the low temperature shutdown feature, detailing charging and discharging cut-off temperatures.
5.3 응용 프로그램
This battery is ideal for a wide range of applications:
- RVs and Campers
- Marine and Boat Systems
- Off-grid Solar Systems
- Photovoltaic Energy Storage
- 백업 전원 시스템
Note: This battery is not suitable for automotive starting applications or vehicles requiring start-stop functionality.
Image: Dyness battery being used as an emergency power source for an RV.
6. 유지관리
6.1 정기 점검
Periodically inspect the battery terminals for any signs of corrosion or loose connections. Ensure all connections are tight and clean.
6.2 청소
배터리를 깨끗하고 건조하게 유지하십시오.amp cloth to wipe the exterior. Do not use solvents or abrasive cleaners, as these can damage the battery casing.
6.3 보관
If storing the battery for an extended period (more than one month), ensure it is charged to approximately 50-70% of its capacity. Store the battery in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures. The low self-discharge rate of LiFePO4 batteries minimizes capacity loss during storage, but periodic checks are recommended.
7. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제에 대한 해결 방법을 제공합니다. 문제가 지속될 경우 고객 지원팀에 문의하십시오.
7.1 배터리가 충전되지 않음
- 연결 확인: Ensure all charging cables are securely connected to both the battery and the charger.
- 충전기 호환성 확인: Confirm that your charger is specifically designed for LiFePO4 batteries and is functioning correctly.
- 온도 확인: Ensure the ambient temperature is above 0°C (32°F). The BMS will prevent charging below this temperature.
7.2 Battery Not Discharging / No Power Output
- 연결 확인: Verify all load connections are secure and correct.
- 부하 호환성: Ensure the connected load is within the battery's specified current and power limits.
- 온도 확인: Ensure the ambient temperature is above -20°C (-4°F). The BMS will prevent discharging below this temperature.
- BMS 보호: The BMS may have activated a protection mode (e.g., over-discharge, short-circuit, over-current). Disconnect the load, wait a few minutes, and try reconnecting. If the issue persists, contact support.
7.3 Unusual Odor or Swelling
Immediately disconnect the battery from all loads and chargers. Do not attempt to use or charge the battery. Contact Dyness customer support without delay.
8. 사양
Image: Detailed dimensions of the Dyness 12.8V 100Ah LiFePO4 battery.
| 사양 | 값 |
|---|---|
| 상표 | 다이네스 |
| 모델 | 12V 100Ah LiFePO4 |
| 공칭 권tage | 12.8 볼트 |
| 용량 | 100 Amp에레아워(아) |
| 배터리 화학 | 리튬철인산(LiFePO4) |
| 통합 BMS | 100A |
| 사이클 수명 | Up to 15,000 cycles (4,000 cycles at 100% DoD) |
| 저온 충전 차단 | 0°C(32°F) |
| 저온 방전 차단 | -20°C (-4°F) |
| 치수(길이 x 너비 x 높이) | 33 x 17.2 x 21.4cm(13 x 6.77 x 8.43인치) |
| 무게 | 9.9kg |
| Max. Series Connection | 배터리 4개 |
| Max. Parallel Connection | 4 batteries (up to 16 total modules in 4S4P) |
| 인증 | CE/UN38.3 |
9. 보증 및 지원
9.1 보증
The Dyness 12V 100Ah LiFePO4 Deep Cycle Battery comes with a 5년 보증 구매일로부터 적용됩니다. 본 보증은 정상적인 사용 및 서비스 조건 하에서의 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 자료를 보관해 주십시오.
9.2 고객 지원
For technical assistance, warranty claims, or any questions regarding your Dyness battery, please contact Dyness customer support. Dyness offers 24/7 customer assistance for immediate support. Refer to the official Dyness web최신 연락처 정보는 웹사이트 또는 구매 서류를 참조하십시오.