DATOUBOSS DATOUBOSS-48V-6200W

DATOUBOSS 6200W 48V Hybrid Solar Inverter Instruction Manual

Model: DATOUBOSS-48V-6200W | Brand: DATOUBOSS

1. 소개 및 이상view

The DATOUBOSS 6200W 48V Hybrid Solar Inverter is a pure sine wave inverter designed to convert 48V DC power to 220/230V AC power. It integrates a 120A MPPT solar charge controller and supports a maximum PV array power of 8500W. This inverter is engineered for reliable performance in various applications, including RVs, camping boats, and home emergency power systems. It features advanced protection mechanisms and flexible operating modes to optimize solar energy utilization.

DATOUBOSS 6200W Hybrid Solar Inverter with key specifications listed

Image 1.1: The DATOUBOSS 6200W Hybrid Solar Inverter, highlighting its 6200W battery inverter output, 6500W PV inverter output, 120A MPPT charging, 8500W maximum PV input, and 60-500Vdc MPPT input voltag전자 범위.

2. 안전 정보

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury. Keep this manual for future reference.

  • 전문적인 설치: 설치는 자격을 갖춘 사람만 수행해야 합니다.
  • 통풍: 과열을 방지하기 위해 인버터 주변에 적절한 환기가 이루어지도록 하세요.
  • 물 노출: 인버터를 비, 눈, 물보라 또는 기타 액체에 노출시키지 마십시오.
  • 접지: 안전을 위해서는 적절한 접지가 필수적입니다.
  • 비상 정지: Know how to quickly disconnect power in an emergency.
  • 낙뢰 및 서지 보호: This inverter includes enhanced lightning and overvoltage protection. Integrated safety switches at input and output further enhance safety against overload, short circuit, and surge hazards.
DATOUBOSS 6200W Hybrid Inverter with lightning protection features

Image 2.1: The inverter features a new lightning-proof design, offering lightning and high-voltage protection, input and output safety switches, increased PV input current, improved inverter performance under PV, higher PV utilization, and EMI filtering.

High-current safety switches on the DATOUBOSS inverter

Image 2.2: High-current safety switches are integrated to effectively prevent overload, short circuit, and surge hazards, ensuring safe and reliable operation.

3. 제품 특징

  • 순수 사인파 출력: 민감한 전자기기에 적합한 고품질 AC 전원을 제공합니다.
  • 통합 MPPT 충전 컨트롤러: Features a 120A MPPT solar charge controller for efficient solar power harvesting.
  • 배터리 없이 작동: Supports direct power supply to loads from PV array or AC source without requiring a battery connection.
  • BMS Protection System: Equipped with a Battery Management System for lithium batteries, preventing overcharge and deep discharge.
  • Customizable Charging Modes: Offers three battery charging modes: Hybrid (solar and utility), Solar Limited, and Pure Solar.
  • LCD Display and LED Indicators: Real-time system data and operating status are displayed on the LCD screen, complemented by 3 dynamic LED indicators. Error codes are shown for easy troubleshooting.
  • EMI Filtering: Minimizes electromagnetic interference for stable operation.
  • RS485 통신 포트: Enables communication with batteries for monitoring and optimized charging.

4. 외관 설명

The DATOUBOSS 6200W Hybrid Solar Inverter features a robust design with clearly labeled connection points and an intuitive user interface.

상세한 view of the DATOUBOSS inverter's front, left, and right sides, showing ports and indicators

이미지 4.1: 이 이미지는 자세한 내용을 제공합니다. view of the inverter's front, left, and right sides. The front panel includes an LCD display, status indicators, and control buttons (ESC, UP, DOWN, ENTER). The top panel shows AC input, BMS/RS485, AC output, RS232 Dry Contact, and PV input ports. The bottom features a safety switch and ground wire connection. The left and right sides show ventilation grilles.

  • 전면 패널: Features an LCD display for real-time data, status indicators (AC/INV, CHG, FAULT), and navigation buttons (ESC, UP, DOWN, ENTER).
  • Top Connections: Includes terminals for AC input, AC output, PV input, BMS/RS485 communication, and RS232 Dry Contact.
  • 하단 연결: Equipped with a safety switch and a ground wire terminal.
  • 측면: Designed with ventilation grilles for efficient heat dissipation.

5. 사양

Key technical specifications for the DATOUBOSS 6200W 48V Hybrid Solar Inverter:

Detailed parameters label on the DATOUBOSS inverter

Image 5.1: A close-up of the inverter's detailed parameters label, showing model DT4862L, capacity, PV and DC specifications, operating temperature, and protection degree.

특징사양
모델 번호DATOUBOSS-48V-6200W
용량6200W / 6200VA
입력 Voltage48VDC
출력 볼륨tage230 VAC (Pure Sine Wave)
최대 출력 전력9300 와트
MPPT PV Voltag및 범위60VDC ~ 500VDC
최대 PV 어레이 전력8500와트
최대 태양광 충전 전류120아
최대 AC 충전 전류100아
Max Combined Charging Current (PV + AC)120아
작동 온도 범위-10°C ~ 50°C
보호 정도IP21
치수(길이 x 너비 x 높이)31 x 13.4 x 46.3cm
품목 무게10.4 킬로그램
디스플레이 유형액정표시장치

6. 설정

Proper setup is crucial for the safe and efficient operation of your hybrid solar inverter. Always ensure all power sources are disconnected before making any connections.

  1. 설치: Choose a suitable location for mounting the inverter. It should be indoors, well-ventilated, and protected from direct sunlight, moisture, and extreme temperatures. Ensure sufficient clearance around the unit for airflow.
  2. 접지: 인버터의 접지 단자를 안정적인 접지에 연결하세요.
  3. 배터리 연결: Connect the battery bank to the inverter's battery terminals. Ensure correct polarity (positive to positive, negative to negative). Use appropriate cable gauges and fuses. The inverter supports 48V lithium batteries and includes a lithium battery activation function.
  4. PV 어레이 연결: Connect the solar panel array to the PV input terminals. Verify that the PV voltage and current are within the inverter's specified operating range (60-500 VDC MPPT range, max 500 VDC open circuit voltage, max 27A input current). Ensure correct polarity.
  5. AC 입력 연결(공공 서비스/발전기): 교류 전원 공급망 또는 호환 가능한 발전기를 교류 입력 단자에 연결하십시오.
  6. AC 출력 연결(부하): Connect your AC loads (appliances, circuits) to the AC output terminals.
  7. 통신 연결(선택 사항): If using, connect the RS485 port to a compatible battery or monitoring device. The WiFi module (if included) can be connected for remote monitoring.
  8. 최종 점검: Double-check all connections for tightness and correct polarity. Ensure all safety switches are in the OFF position before powering on.

7. 운영

Once the inverter is properly installed and all connections are secure, you can begin operation.

  1. 전원 켜기: Turn on the battery breaker first, then the PV array breaker, and finally the AC input breaker (if connected). Switch the inverter's main power ON/OFF switch to the 'ON' position.
  2. LCD 디스플레이: The LCD screen will illuminate, displaying system data such as input voltage, 출력 볼륨tage, battery status, and load percentage. Use the 'UP' and 'DOWN' buttons to navigate through different display screens and the 'ENTER' button to confirm selections.
  3. LED 표시등: Observe the three LED indicators:
    • AC/INV: Indicates AC input status or inverter operation.
    • CHG: 배터리 충전 상태를 나타냅니다.
    • 결점: Illuminates if an error occurs. Refer to the LCD for specific error codes.
  4. Setting Charging Modes: The inverter allows customization of battery charging modes:
    • 하이브리드 충전: (Default) Utilizes both solar energy and AC utility power for charging.
    • Solar Limited Charge: Prioritizes solar charging, using AC utility only when solar is insufficient.
    • Pure Solar Charge: 배터리를 태양광으로만 충전합니다.
    These settings can be adjusted via the LCD menu.
  5. Battery-Less Mode: The inverter can operate without a battery connected, directly powering loads from the PV array or AC source. This mode can be configured through the system settings.
  6. 모니터링: Regularly check the LCD display for system status and performance. If a WiFi module is installed, use the dedicated application for remote monitoring.

8. 유지관리

Regular maintenance ensures the longevity and optimal performance of your DATOUBOSS Hybrid Solar Inverter.

  • 청소: Keep the inverter clean and free from dust. Use a dry cloth to wipe the exterior. Ensure ventilation openings are not blocked.
  • 연결 확인: 모든 전기 연결부의 조임 상태와 부식 여부를 주기적으로 점검하십시오. 느슨한 연결부는 조여주십시오.
  • 배터리 검사: If using batteries, regularly check their terminals for corrosion and ensure they are clean and secure. Monitor battery health via the inverter's display or communication port.
  • 환경 조건: Ensure the inverter remains in a suitable environment, free from excessive heat, cold, or humidity.
  • 펌웨어 업데이트: 제조사 확인해보세요 web인버터에 최신 기능과 버그 수정 사항이 적용되도록 펌웨어 업데이트가 있는지 해당 사이트를 확인하십시오.

9. 문제 해결

이 섹션에서는 일반적인 문제에 대한 해결 방법을 안내합니다. 복잡한 문제의 경우 기술 지원팀에 문의하십시오.

문제가능한 원인해결책
인버터가 켜지지 않습니다No battery power; main switch off; loose connections.배터리 용량 확인tage; ensure main switch is ON; verify all connections.
AC 출력 없음과부하; 단락; 배터리 전압 부족tage; fault code.Reduce load; check for short circuits; charge battery; check LCD for error codes.
배터리가 충전되지 않음PV input too low/high; AC input unavailable; incorrect charging mode.PV 볼륨 확인tage/current; verify AC input; adjust charging mode settings.
Fault LED illuminatedInternal error; over-temperature; over-voltag전자/전류.Note the error code on the LCD and consult the full user manual for specific remedies. Power cycle the unit if safe to do so.

10. 보증 및 지원

DATOUBOSS is committed to providing high-quality products and customer satisfaction.

  • 수명: This product is designed for a 10-year lifespan.
  • 보장하다: A 5-year guarantee covers manufacturing defects and malfunctions under normal use.
  • 고객 지원: We offer 24-hour response for technical inquiries and support.
  • 서비스: Local warehouses are available for efficient service and parts.
Icons representing 10 years lifespan, 5 years guarantee, 24 hours response, and local warehouses

Image 10.1: Visual representation of DATOUBOSS's commitment to product quality and customer service, including a 10-year lifespan, 5-year guarantee, 24-hour response, and local warehouses.

For further assistance or to report an issue, please contact DATOUBOSS customer service through the official channels provided with your purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.