Mackie THUMPSUBGO

Mackie ThumpSub GO 8" 400W Portable Battery-Powered Subwoofer Instruction Manual

Model: THUMPSUBGO | Brand: Mackie

1. 서론

The Mackie ThumpSub GO is an 8-inch, 400W battery-powered portable subwoofer designed for enhanced bass performance in various mobile audio setups. Its slim and ergonomic design allows for easy transport and flexible placement options, including horizontal or vertical orientation. This subwoofer features hot-swappable batteries for extended operation and integrated Bluetooth for wireless audio streaming and system control.

Mackie ThumpSub GO in an outdoor setting

Figure 1: Mackie ThumpSub GO in an outdoor setting, demonstrating its portability and powerful bass capabilities.

2. 중요한 안전 정보

Please read and understand all instructions before using this product. Retain these instructions for future reference. Always follow all warnings and instructions marked on the product and in the manual.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (California Proposition 65)

  • 이 기기를 비나 습기에 노출시키지 마십시오.
  • 이 기기를 물 근처에서 사용하지 마십시오.
  • 마른 천으로만 닦으십시오.
  • 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
  • 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
  • 전원 코드가 밟히거나 끼지 않도록 보호하세요. 특히 플러그, 편의용 콘센트 및 기기에서 나오는 부분은 보호하세요.
  • 제조사가 지정한 부속품/액세서리만 사용하세요.
  • 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.

3. 패키지 내용

Your Mackie ThumpSub GO package should include the following items:

  • Mackie ThumpSub GO 8" Portable Battery-Powered Subwoofer
  • One (1) GB-200 Battery (provides up to 6 hours of operation)
  • Power Cord for battery charging
  • 빠른 시작 가이드

An optional second GB-200 battery is sold separately to extend operation up to 12 hours.

4. 설정

4.1 배터리 설치 및 충전

The ThumpSub GO features two hot-swappable battery compartments. One GB-200 battery is included, providing up to 6 hours of continuous operation. An optional second battery can be purchased separately for extended use.

Hand inserting a battery into the ThumpSub GO

Figure 2: Hand inserting a GB-200 battery into one of the hot-swappable battery compartments on the side of the ThumpSub GO. The subwoofer supports up to two batteries for extended playtime.

To install a battery, locate the battery compartment on the side of the subwoofer. Open the cover and slide the GB-200 battery into the slot until it clicks securely into place. Close the cover. The battery status LEDs on the control panel will indicate the charge level.

4.2 서브우퍼 배치

The ThumpSub GO can be placed in various orientations to suit your setup needs:

  • 수평 배치: Ideal for discreet placement or when stacking other equipment.
  • 수직 배치: Provides a smaller footprint, suitable for tight spaces.
  • 극 산: Use the integrated pole mount to elevate a compatible full-range loudspeaker (e.g., Mackie Thump GO) above the subwoofer for a compact and powerful PA system. (SPM400 speaker pole sold separately).
Mackie ThumpSub GO in horizontal orientation

Figure 3: ThumpSub GO placed horizontally in an outdoor setting.

Mackie ThumpSub GO in vertical orientation

Figure 4: ThumpSub GO placed vertically, showcasing its compact footprint.

Mackie ThumpSub GO with a pole-mounted loudspeaker

Figure 5: A Mackie ThumpSub GO with a full-range loudspeaker mounted on top using a speaker pole, creating a complete PA system.

4.3 유선 연결

The ThumpSub GO offers flexible wired connectivity options for mono, stereo, or zone PA systems. Use XLR cables for optimal audio quality.

Connecting loudspeakers to the ThumpSub GO back panel

Figure 6: Close-up of the ThumpSub GO back panel showing XLR input and output connections for linking with other loudspeakers.

  • Mixer to Subwoofer: Connect the main outputs of your mixer to the XLR INPUT (A or B) on the ThumpSub GO. For a stereo setup, use both A and B inputs from your mixer's left and right outputs.
  • Subwoofer to Full-Range Loudspeakers: Connect the XLR OUTPUT (A or B) from the ThumpSub GO to the input of your full-range loudspeakers (e.g., Mackie Thump GO). This allows the subwoofer to process the low frequencies and pass the higher frequencies to the main speakers.

4.4 블루투스 스트리밍

The ThumpSub GO supports Bluetooth for wireless audio streaming and linking with other Thump GO series speakers.

ThumpSub GO streaming wirelessly via Bluetooth

Figure 7: ThumpSub GO streaming audio wirelessly, providing Bluetooth capabilities to your entire PA system.

  • 편성: Press and hold the Bluetooth button on the ThumpSub GO control panel until the LED flashes. Select

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

    After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.