DATOUBOSS 12V 100Ah LiFePO4 Battery User Manual

1. 서론

This manual provides essential information for the safe and efficient use of your DATOUBOSS 12V 100Ah LiFePO4 Battery. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the battery. This battery is designed for various deep cycle applications including RVs, solar energy systems, trolling motors, and camp설정 중입니다.

2. 안전 정보

Always prioritize safety when handling batteries. Failure to follow safety instructions can result in personal injury or damage to equipment.

Built-in BMS Protection: The DATOUBOSS LiFePO4 battery features a built-in 100A Battery Management System (BMS) that protects against over-voltage, 언더볼륨tage, over-current, over-temperature, and short-circuit conditions. This system enhances operational safety.
UL-Certified Cells: The internal battery cells are UL-certified, ensuring high safety and reliability standards.
단락을 방지하세요: Do not short-circuit the battery terminals. Use insulated tools during installation.
적절한 환기: Ensure adequate ventilation around the battery, especially during charging and discharging.
온도 범위: Operate the battery within the specified temperature ranges. Extreme temperatures can affect performance and safety.
방수 등급: The battery has an IP65 waterproof rating, providing protection against dust and low-pressure water jets. However, avoid submerging the battery in water.
처분: LiFePO4 batteries must be recycled or disposed of according to local regulations. Do not dispose of in household waste.

DATOUBOSS LiFePO4 Battery with BMS Protection Features — Image 2.1: Visual representation of the multiple security protections offered by the built-in BMS, including overcharge, over-discharge, over-voltage, overcurrent, overload, short circuit, and temperature protection.

3. 제품 특징

The DATOUBOSS 12V 100Ah LiFePO4 Battery offers advanced features for reliable power storage:

100A 통합 BMS: Provides comprehensive protection for enhanced safety and battery lifespan.
높은 수명 주기: Designed for 15,000+ deep cycles, offering extended durability compared to traditional lead-acid batteries.
가볍고 컴팩트함: Weighs approximately 10.92 kg (24 lbs), which is significantly lighter than comparable lead-acid batteries, facilitating easier installation and portability.
유연한 확장: Supports series and parallel connections up to 4P4S, allowing for configurations up to 48V (51.2V) 400Ah, delivering up to 20.48kWh energy.
폭넓은 작동 온도: Capable of operating effectively in a broad temperature range from -4°F to 150°F (-20°C to 65°C).
IP65 방수 등급: Ensures protection against dust ingress and low-pressure water jets.

Comparison of DATOUBOSS LiFePO4 Battery with Lead-Acid Battery — Image 3.1: A visual comparison highlighting the advantages of the DATOUBOSS 12V 100Ah LiFePO4 Battery over a traditional 12V 100Ah Lead-Acid battery, including lighter weight, longer lifespan, and more life cycles.

4. 설정

4.1 포장 풀기 및 초기 검사

Upon receiving your battery, carefully unpack it and inspect for any visible damage. If damage is found, contact your supplier immediately.

4.2 터미널 연결

The battery is equipped with M8 terminal bolts. Ensure all connections are clean, tight, and secure to prevent resistance and overheating. Use appropriate cable gauges for your application.

DATOUBOSS LiFePO4 Battery Terminal Specifications and Dimensions — 이미지 4.1: 상세 view of the battery terminals, indicating M8 terminal bolts, along with the physical dimensions of the battery (25.8cm/10.2in length, 16.7cm/6.6in width, 21.5cm/8.5in height).

4.3 직렬 및 병렬 연결

The DATOUBOSS 12V 100Ah LiFePO4 battery supports both series and parallel connections for increased voltage or capacity. It can be expanded up to 4P4S (4 batteries in parallel, 4 sets in series) to achieve a 48V (51.2V) 400Ah system.

병렬 연결: Connect positive terminals to positive terminals and negative terminals to negative terminals to increase capacity while maintaining 12V.
직렬 연결: Connect the positive terminal of one battery to the negative terminal of the next battery to increase voltage. Ensure all batteries are of the same voltage and capacity when connecting in series.
균형: For optimal performance and longevity in series or parallel configurations, ensure all batteries are at a similar state of charge before connecting.

DATOUBOSS LiFePO4 Battery 4S4P Expansion — Image 4.2: Illustration of how DATOUBOSS LiFePO4 batteries can be configured in series (to increase voltage, e.g., 48V 100Ah) or parallel (to increase capacity, e.g., 12V 400Ah) to form a larger battery system.

5. 사용 설명서

5.1 충전 중

Use a LiFePO4 compatible charger. The maximum recommended charge current is 50A. Avoid overcharging, though the built-in BMS provides protection against this.

5.2 방전

The maximum continuous discharge current is 120A. The BMS will disconnect the battery if the discharge current exceeds this limit or if the voltage 값이 안전 임계값 아래로 떨어집니다.

5.3 환경 조건

The battery is designed to operate in temperatures ranging from -4°F to 150°F (-20°C to 65°C). Operating outside this range may reduce performance or lifespan.

DATOUBOSS LiFePO4 Battery Extreme Temperature Performance — Image 5.1: Illustration demonstrating the DATOUBOSS LiFePO4 battery's ability to operate effectively in extreme temperatures, from -4°F (low temperature) to 150°F (high temperature).

5.4 시스템 통합

The battery can be integrated into various systems, including solar power setups, RVs, and home backup systems. Ensure compatibility with your inverter and charge controller.

DATOUBOSS LiFePO4 Battery in a Solar Home System — Image 5.2: Diagram showing a flexible capacity expansion setup, illustrating how multiple DATOUBOSS LiFePO4 batteries can be connected to solar panels via an MPPT controller and inverter to power various household loads.

6. 유지관리

LiFePO4 batteries require minimal maintenance, but following these guidelines will help ensure maximum lifespan:

정기 검사: 배터리 단자에 부식이나 연결 불량이 있는지 주기적으로 점검하십시오. 필요에 따라 단자를 청소하십시오.
청소: 배터리를 깨끗하게 유지하고 먼지와 이물질이 끼지 않도록 하십시오. 마른 천으로 닦으십시오.
저장: If storing the battery for an extended period, ensure it is charged to approximately 50% state of charge and stored in a cool, dry place. Avoid storing in direct sunlight or extreme temperatures.
심부방전을 피하세요: While the BMS protects against over-discharge, consistently avoiding very deep discharges can contribute to longer battery life.

7. 문제 해결

If you encounter issues with your DATOUBOSS LiFePO4 battery, consider the following common troubleshooting steps:

배터리가 충전되지 않음:
- Check all cable connections for tightness and corrosion.
- 충전기가 LiFePO4 배터리와 호환되는지, 그리고 정상적으로 작동하는지 확인하십시오.
- Ensure the battery temperature is within the acceptable charging range.
- The BMS may have activated a protection mode (e.g., over-discharge). Try connecting to a charger to reset the BMS.
전원 출력 없음:
- 단자 연결부가 헐거워지거나 부식되었는지 확인하십시오.
- 배터리가 충분히 충전되었는지 확인하십시오.
- The BMS may have activated a protection mode (e.g., over-discharge, over-current, short-circuit). Disconnect the load, wait a few minutes, and reconnect.
평소와 다른 냄새 또는 부기:
- 배터리를 모든 부하 및 충전기에서 즉시 분리하십시오.
- 배터리를 안전하고 통풍이 잘 되는 곳으로 옮기십시오.
- Do not attempt to use or repair the battery. Contact DATOUBOSS support.

For issues not resolved by these steps, please contact DATOUBOSS customer support.

8. 사양

특징	사양
상표	다투보스
모델	12V 100Ah LiFePO4 배터리
공칭 권tage	12.8V
정격 용량	100아아
에너지	1280Wh
내장형 BMS	100A
사이클 수명	15,000+ Deep Cycles
최대 충전 전류	50A
최대 연속 방전 전류	120A
작동 온도	-4°F ~ 150°F(-20°C ~ 65°C)
방수 등급	IP65
터미널 유형	M8 볼트
무게	약 10.92kg(24파운드)
치수(길이 x 너비 x 높이)	25.8cm x 16.7cm x 21.5cm(10.2인치 x 6.6인치 x 8.5인치)
한국어:	769230100583
차량 서비스 유형	Lawn Mower, RV, Truck
자동차 적합 유형	유니버설 핏

9. 보증 및 지원

For warranty information and customer support, please refer to the documentation provided with your purchase or contact DATOUBOSS directly through their official channels. Ensure you retain your proof of purchase for any warranty claims.

연락처 정보: Please visit the official DATOUBOSS web최신 지원 연락처 정보는 해당 사이트나 구매처에 문의하세요.