DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. 안전 정보

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• 이 제품을 작동할 때는 항상 측면 보호대가 달린 안전 고글이나 안전 안경을 착용하고, 필요한 경우 전체 얼굴 보호대도 착용하세요.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. 제품 오버view

패키지 내용

• 무선 브래드 네일러
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah 리튬 이온 배터리
• 1시간 급속 충전기
• 운반 케이스
• 사용 설명서

도구 구성 요소

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

치수 및 무게

Figure 2: Physical dimensions and weight of the nailer (without battery).

• 길이: 10.83인치(27.5cm)
• 폭: 9.45인치(24cm)
• Weight: 6.19 lbs (without battery)

3. 설정

배터리 설치

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. 배터리를 공구의 배터리 슬롯에 맞춰 넣으세요.
3. 배터리가 제자리에 단단히 고정될 때까지 슬롯에 밀어 넣습니다.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. 해제 버튼을 누르고 매거진 커버를 잡아당깁니다.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. 릴리스 버튼에 맞물릴 때까지 매거진 커버를 닫습니다.

못 View어 창

못 viewer window allows you to quickly check the fastener level. When the window shows 빨간색, it indicates the magazine is without nails. When it shows 검은색, it indicates the magazine contains nails.

4. 사용 설명서

발사 모드

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Figure 4: Firing mode selection switch.

단일 발사 모드

• Shift the mode switch to the 왼쪽 (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

접촉 발사 모드

• Shift the mode switch to the 오른쪽 (contact firing icon).
• 방아쇠를 당기십시오.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

메모: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

깊이 조정

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED 조명

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED 표시등

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• 빨간색 켜짐: 배터리가 부족합니다.
• 빨간색 깜박임: Nails/staples are jammed.
• 녹색 켜짐 : No nails/staples in the magazine.
• 녹색 깜박임 : 과열.
• 꺼짐: 정상 작동 상태.

공식 제품 영상

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. 유지관리

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

배터리 관리

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• 직사광선이나 극한의 온도를 피하고 서늘하고 건조한 곳에 배터리를 보관하십시오.

6. 문제 해결

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. 사양

호환 가능한 패스너

Figure 9: Compatible nail and staple types.

8. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.