PGST PG103-C+T53
PGST PG103-C+T53 Home Security Alarm System User Manual
Model: PG103-C+T53
1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your PGST PG103-C+T53 Home Security Alarm System. Please read this manual thoroughly before using the system to ensure proper functionality and safety.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 1 x PGST Control Panel (Alarm Host)
- 모션 센서 2개
- 도어/창문 센서 4개
- 2 x RFID 카드
- 2 x 원격 제어
- 1 x 보안 카메라
- 1 x 64GB SD 카드
- 1 x Power Adapter for Control Panel
- 1 x 사용자 매뉴얼(이 문서)

Image 2.1: All components included in the PGST PG103-C+T53 Home Security Alarm System kit.
3. 설정 및 설치
3.1. 제어판 설치
- 전원 연결: Connect the control panel to a power outlet using the provided power adapter. The panel includes a backup lithium-ion battery.
- 초기 전원 켜기: The panel will power on automatically. Follow the on-screen prompts for initial setup.
- 놓기: Install the control panel in a central location within your home, away from direct sunlight and moisture, and within Wi-Fi range.

이미지 3.1: Example placement of the PGST Control Panel.
3.2. App Integration (Smart Life / Tuya Smart)
- 앱 다운로드 : Download the "Smart Life" or "Tuya Smart" app from your mobile device's app store.
- 계정 생성: 새 계정을 등록하거나 이미 계정이 있는 경우 로그인하세요.
- 장치 추가: In the app, tap "+" to add a new device. Select "Security & Video Surveillance" then "Alarm (Wi-Fi)".
- Wi-Fi에 연결: Follow the in-app instructions to connect the control panel to your 2.4GHz Wi-Fi network. (5GHz Wi-Fi is not supported).

Image 3.2: The Smart Life app interface for managing your security system.
3.3. 센서 설치 및 페어링
All sensors are pre-paired with the control panel. If re-pairing is needed, refer to the control panel's on-screen menu or app instructions.
3.3.1. 모션 센서
- 놓기: Install motion sensors in corners of rooms, hallways, or areas where intruders would likely pass. Mount them at a height of 6-8 feet (1.8-2.4 meters) for optimal detection.
- 피하다: Do not place near heat sources, direct sunlight, or areas with significant air drafts.
- 감지 범위: Each motion sensor has a detection range of approximately 32 feet (10 meters) and a 110° field of view.

Image 3.3: Motion sensor detection range and field of view.
3.3.2. Door/Window Sensors
- 설치: Mount the main sensor unit on the door or window frame and the smaller magnet unit on the moving part (door or window). Ensure the two parts are aligned and within 0.5 inches (1.2 cm) of each other when the door/window is closed.
- 안전한 첨부 파일: Use the provided adhesive pads or screws for secure installation.

이미지 3.4: Examples of door/window sensor installation.
3.4. Remote Controls and RFID Cards
- 원격 제어: Use the remote controls to arm, disarm, or trigger an emergency alarm. Buttons are typically labeled for these functions.
- RFID 카드: Tap an RFID card on the designated area of the control panel to quickly arm or disarm the system.

Image 3.5: Using an RFID card for quick system control.
3.5. Security Camera Setup
Refer to the separate manual provided with the security camera for detailed setup instructions. Once configured, the camera can often be integrated and viewed through the Smart Life/Tuya Smart app.
3.6. 4G SIM Card Installation (Optional)
For SMS and phone call alerts, insert a 2G/3G/4G SIM card into the designated slot on the control panel. Ensure the SIM card is active and has sufficient credit/data. Note that telephone and SMS services may incur additional fees from your mobile carrier.

Image 3.6: Connectivity options: Wi-Fi for app alerts and 4G/GSM for calls/SMS (SIM card not included).
4. 운영
4.1. 시스템 무장 및 무장 해제
- 무장(외출 모드): Activates all sensors. Use when leaving the property. Can be done via control panel, remote, RFID card, or app.
- 무장 해제: Deactivates all sensors. Use when returning home. Can be done via control panel, remote, RFID card, or app.
- Home Mode (Stay Arm): Activates perimeter sensors (e.g., door/window sensors) while allowing free movement inside. Check app settings for configuration.

이미지 4.1: Example of scheduled arming and disarming for daily routines.
4.2. 경고 및 알림
- 사이렌: If a sensor is triggered while armed, the 120dB siren will activate to deter intruders.
- 앱 알림: Receive real-time alerts on your smartphone via the Smart Life/Tuya Smart app.
- Phone Calls/SMS: If a SIM card is installed and configured, the system can send SMS messages and make calls to pre-set emergency contacts.

이미지 4.2: Example of real-time alarm notifications on a smartphone.
4.3. Alexa를 통한 음성 제어
To enable voice control, link your Smart Life/Tuya Smart account with Amazon Alexa. Once linked, you can use voice commands such as "Alexa, arm my home" or "Alexa, disarm my home" (a PIN may be required for disarming).

Image 4.3: Integrating the alarm system with Amazon Alexa for voice control.
4.4. 안티-Tamp어 기능
The control panel features a physical anti-tamper mechanism. Any forced removal or tampering with the panel will trigger an immediate alarm. The alarm can only be stopped by entering the correct password on the panel.
4.5. 시스템 확장
The PGST system supports up to 99 additional sensors. To add new sensors, refer to the "Add Device" section in the Smart Life/Tuya Smart app or the control panel's settings menu.
5. 유지관리
5.1. 배터리 교체
- 제어판: The control panel has a built-in rechargeable lithium-ion battery for backup power. It charges automatically when connected to AC power.
- 센서: Motion sensors and door/window sensors are battery-powered. The app or control panel will indicate low battery status. Replace batteries with the specified type (usually CR2032 or AAA, check individual sensor labels).
- 원격 제어: Remote controls use button cell batteries. Replace when functionality decreases.
5.2. 청소
Wipe the control panel and sensors with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the devices.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 시스템이 Wi-Fi에 연결되지 않습니다 | Wi-Fi 비밀번호가 잘못되었습니다. 네트워크는 5GHz이고 신호가 약합니다. | Ensure correct 2.4GHz Wi-Fi password. Move panel closer to router. Restart router and panel. |
| 센서가 경보를 울리지 않음 | Low battery; sensor out of range; sensor not properly paired; system disarmed. | Check sensor batteries. Ensure system is armed. Re-pair sensor if necessary. Check sensor placement. |
| 앱 알림 없음 | App permissions not granted; phone's notification settings disabled; poor internet connection. | Check app notification permissions. Ensure stable internet connection on phone and panel. |
| SIM card not working for calls/SMS | SIM not active; incorrect APN settings; insufficient credit; 5G SIM. | Verify SIM card is active and has credit. Ensure it's a 2G/3G/4G compatible SIM. Check APN settings in panel menu. |
| 허위 경보 | Improper sensor placement; pets; environmental factors (e.g., strong drafts). | Adjust motion sensor sensitivity. Reposition sensors away from pets or drafts. Ensure door/window sensors are securely mounted. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | PG103-US-4G-C+T53-64G |
| 상표 | PGST |
| 연결 기술 | 2.4GHz Wi-Fi, 2G/3G/4G GSM (SIM card not included) |
| 전원 | Battery Powered (Control Panel: 1 Lithium Ion battery included for backup) |
| 제어판 크기 (길이 x 너비 x 높이) | 약 8 x 3 x 3인치 |
| 제어판 무게 | 약 3.2온스 |
| 사이렌 출력 | 120데시벨 |
| 지원되는 최대 센서 수 | 99+ |
| 모션 센서 범위 | 32피트(10미터) |
| 모션 센서 분야 View | 110° |
| 앱 호환성 | 스마트 라이프, 투야 스마트 |
| Voice Assistant 호환성 | Amazon Alexa, Google Assistant |
8. 보증 및 지원
For warranty information and technical support, please refer to the documentation included with your purchase or contact PGST customer service directly. Contact details can typically be found on the manufacturer's web사이트 또는 제품 포장.
Online resources and FAQs may also be available through the Smart Life or Tuya Smart app support sections.
관련 문서 - PG103-C+T53
![]() |
GSM 및 WiFi 알람 시스템 사용 설명서 User manual for the GSM & WiFi Alarm System (GSM+WIFI+4G) by PGST, detailing setup, operation, features, and remote management via mobile app. |
![]() |
PGST 스마트 알람 시스템 - 작동 지침 및 지원 PGST 스마트 알람 시스템(PG-103, PG107)을 사용해 보세요. 이 가이드에는 작동 지침, 지원 연락처, 그리고 가정 보안을 위한 다국어 자료 정보가 포함되어 있습니다. |
![]() |
PGST PG-B02 Wireless Door/Window Contact Sensor User Manual User manual for the PGST PG-B02 wireless door/window contact sensor. Includes installation, pairing, battery replacement, and troubleshooting instructions. |
![]() |
GSM 및 WiFi 알람 시스템 사용 설명서 PG103 알람 호스트의 기능, 설정, 작동 및 모바일 앱 통합에 대한 세부 내용을 설명하는 GSM 및 WiFi 알람 시스템 사용 설명서입니다. |
![]() |
PGST WIFI 도어 윈도우 센서 사용 설명서 PGST WIFI 도어 윈도우 센서 사용 설명서입니다. 기능, 작동, 설치 및 사양을 자세히 설명합니다. FCC 규정 준수 정보가 포함되어 있습니다. |
![]() |
PGST PG-109 알람 호스트 사용자 매뉴얼 PGST PG-109 알람 호스트 보안 시스템의 설치, 작동, 원격 제어, 무선 감지기, 앱 연동 등의 기능 및 기술 사양을 다루는 종합 사용자 설명서입니다. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.





