DATOUBOSS 48V 100Ah LiFePO4 Lithium Battery User Manual

1. 서론

This manual provides essential information for the safe and efficient operation of your DATOUBOSS 48V 100Ah LiFePO4 Lithium Battery. This high-performance battery is designed for various applications including off-grid systems, solar energy storage, RVs, and home backup power. It features advanced communication capabilities, a robust Battery Management System (BMS), and a durable 3U rack-mount design.

설치 및 사용 전에 이 설명서를 꼼꼼히 읽고, 나중에 참조할 수 있도록 보관하십시오.

2. 안전 정보

일반 안전 예방 조치:

• 설치 및 유지보수 작업 중에는 절연 장갑과 보안경을 포함한 적절한 개인 보호 장비(PPE)를 항상 착용하십시오.
• 배터리 단자를 단락시키지 마십시오.
• 배터리를 화기, 과도한 열 또는 직사광선에 노출시키지 마십시오.
• 배터리를 물이나 다른 액체에 담그지 마십시오.
• 작동 중에는 배터리 주변에 적절한 환기가 이루어지도록 하십시오.
• 배터리를 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
• Only use compatible chargers and inverters.
• 화재 발생 시 D급 소화기를 사용하십시오. 물은 리튬 배터리 화재를 악화시킬 수 있습니다.

전기 안전:

• Before connecting or disconnecting any cables, ensure all power sources are turned off.
• Verify correct polarity before making any connections. Reverse polarity can cause severe damage to the battery and connected equipment.
• 모든 연결 부분이 단단하고 안전하게 되어 아크와 과열을 방지하세요.
• Do not attempt to open or disassemble the battery case. There are no user-serviceable parts inside.

3. 패키지 내용

포장을 풀 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.

• DATOUBOSS 48V 100Ah LiFePO4 Lithium Battery Unit(s)
• Parallel Wires (for multi-unit configurations)
• Communication Cables (CAN/RS485)
• 접지선
• 단자 나사
• 사용 설명서 (본 문서)

Image: The DATOUBOSS 48V 100Ah LiFePO4 Battery shown with its included accessories, such as cables and terminal screws.

4. 제품 특징

The DATOUBOSS 48V 100Ah LiFePO4 Lithium Battery offers advanced features for reliable power storage:

• Real-time Monitoring and Protection: Supports CAN/RS485 communication for seamless integration with popular all-in-one solar inverters. Monitor battery status via a mobile app with Bluetooth connectivity.
• High-Performance Cells: Manufactured with 16Pcs Automotive Grade A prismatic cells, ensuring higher energy density, stable performance, and greater power output. Each unit provides 5.12kWh of energy.
• 100A 통합 BMS: The built-in Battery Management System protects against overcharge, over-discharge, over-current, and short circuits. It includes high-temperature cutoff (prevents charging over 149°F / 65°C) and low-temperature cutoff protection to prevent damage in cold environments. A 125A air switch and battery power switch enhance system safety.
• 3U 랙마운트 디자인: Fully compatible with standard 3U racks, allowing for vertical installation to maximize space. Each battery weighs 94.8 pounds and can be connected in parallel with up to 15 other batteries for scalable energy storage.
• Ultra-Long Lifespan: Delivers up to 15,000 cycles at 80% Depth of Discharge (DOD) and over 6,000 cycles at 100% DOD, designed for a 10–15 year service life.

Image: A diagram illustrating the communication capabilities, including WiFi, Bluetooth, inverter/PC connection, and battery-to-battery communication.

이미지: 내부 view of the DATOUBOSS battery highlighting the Grade A prismatic cells and the integrated 100A Battery Management System (BMS).

5. 설정 및 설치

Follow these steps for proper installation of your DATOUBOSS battery:

5.1 물리적 설치

1. 짐 풀기: Carefully remove the battery from its packaging and inspect for any visible damage.
2. 놓기: Install the battery in a dry, well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure the ambient temperature is within the recommended operating range.
3. 랙 장착: The battery is designed for standard 3U rack mounting. Secure the battery using appropriate rack screws and mounting ears.

Image: Multiple DATOUBOSS batteries shown installed in a rack, demonstrating the capability to connect up to 15 units in parallel.

5.2 전기 연결

중요한: 전기 연결 작업을 하기 전에 모든 전원 공급 장치를 차단하십시오.

1. 터미널 연결: Connect the positive (+) terminal of the battery to the positive input of your inverter/charger, and the negative (-) terminal to the negative input. Use the provided terminal screws and ensure connections are tight.
2. 접지: Connect the grounding wire from the battery to a reliable ground point in your system.
3. Parallel Connection (for multiple batteries): If connecting multiple batteries in parallel, use the provided parallel power cables to connect the positive terminals of all batteries together, and similarly for the negative terminals. Ensure all batteries are at a similar State of Charge (SOC) before connecting in parallel.
4. 통신 연결: Connect the communication cables (CAN/RS485) between the battery and your inverter or monitoring device. Refer to your inverter's manual for specific communication port requirements.

이미지: 자세한 view of the battery's front panel, labeling handles, grounding, negative/positive terminals, 125A breaker, power switch, indicators, reset button, ADS, RUN, ALM, dry contact, SOC, and various RS485, CAN, and RS232 communication ports.

5.3 초기 전원 켜기

1. After all connections are secure, turn on the battery's main power switch (often a 125A air switch).
2. Observe the indicator lights on the battery for normal operation.
3. Power on your inverter/charger and other connected equipment according to their respective manuals.

6. 사용 설명서

6.1 전원 스위치 작동

The battery features a main power switch (125A air switch) on the front panel. Flip the switch to the 'ON' position to activate the battery and to the 'OFF' position to power it down. Always power down the battery before performing any maintenance or disconnection.

Image: A close-up showing the one-touch ON/OFF switch and the dual terminals for each pole on the battery.

6.2 Monitoring via Bluetooth App

Download the DATOUBOSS mobile application from your device's app store. Enable Bluetooth on your smartphone and pair it with the battery. The app allows you to monitor real-time battery status, including voltage, 전류, 충전 상태(SOC), 온도 및 개별 셀 부피tag에스.

6.3 인버터 통신

The battery supports CAN and RS485 communication protocols, enabling seamless data exchange with compatible inverters. This allows the inverter to optimize charging and discharging based on the battery's status, enhancing overall system efficiency and longevity. Refer to your inverter's manual for specific communication setup instructions.

Image: The DATOUBOSS battery connected to an inverter, with logos of various compatible inverter brands displayed, indicating support for both CAN and RS485 protocols.

7. 유지관리

The DATOUBOSS LiFePO4 battery requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• 정기 검사: Periodically inspect the battery and its connections for any signs of damage, corrosion, or loose terminals. Tighten any loose connections.
• 청소: Keep the battery clean and free from dust and debris. Use a dry, soft cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
• 온도 조절: Ensure the battery operates within its specified temperature range. Avoid prolonged exposure to extreme heat or cold.
• 저장: 배터리를 장기간 보관할 경우, 배터리 충전량을 약 50%로 유지하고 서늘하고 건조한 곳에 보관하십시오. 모든 부하 및 충전기에서 배터리를 분리하십시오.

8. 문제 해결

If you encounter issues with your DATOUBOSS battery, refer to the following common troubleshooting steps:

If the problem persists after following these steps, please contact DATOUBOSS customer support for further assistance.

9. 사양

Detailed technical specifications for the DATOUBOSS 48V 100Ah LiFePO4 Lithium Battery:

10. 보증 및 지원

보증 정보:

Specific warranty terms and duration may vary. Please refer to the warranty card included with your product or contact the seller/manufacturer directly for detailed warranty information.

고객 지원:

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact DATOUBOSS customer support through the retailer where the product was purchased or visit the official DATOUBOSS web연락처 정보 사이트.