Lerat Electric Space Heater User Manual

1. 중요 안전 지침

Please read all instructions carefully before using this electric space heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.

• 전기 안전: Ensure the power cord is not damaged. Do not use the heater if the cord or plug is damaged. Plug the heater directly into a wall socket; do not use extension cords or portable power strips, as this can lead to overheating or deformation. Avoid overloading circuits by not connecting other high-voltag동일한 소켓에 장치를 연결합니다.
• 놓기: Place the heater on a firm, level surface. Keep the heater away from walls, furniture, curtains, and other combustible materials to prevent blocked air inlets/outlets and overheating. Maintain at least 3 feet (0.9 meters) clearance from all sides.
• 작업: Never cover the heater or run the power cord under carpets, furniture, or appliances. Do not use the heater in wet or damp locations, such as bathrooms or laundry areas, or near water sources.
• 감독: 이 기기는 신체적, 감각적 또는 정신적 능력이 저하되었거나 경험과 지식이 부족한 사람(어린이 포함)이 사용하도록 의도된 것이 아니며, 안전을 책임지는 사람이 기기 사용에 대한 감독이나 지침을 제공하지 않는 한 사용할 수 없습니다. 어린이는 기기를 가지고 놀지 않도록 감독을 받아야 합니다.
• Overheat & Tip-Over Protection: The heater is equipped with automatic shut-off features for overheating and tip-over events. If the heater tips over by more than 45 degrees, it will automatically power off. Ensure the heater is placed upright on a stable surface for continuous operation.
• 재료 안전: 이 히터는 안전성 향상을 위해 V-0 등급의 난연 소재로 제작되었습니다.

Figure 1: How to Use More Safely

2. 제품 오버view

2.1개의 구성요소

The Lerat Electric Space Heater features a compact design with essential components for efficient and safe heating.

• 컨트롤 노브: Located on the top, used to select operating modes.
• Air Inlet/Outlet Grille: Front grille for heat emission, rear grille for air intake.
• 전원 코드: 전기 콘센트에 연결합니다.
• Anti-Tilt Switch: Located at the bottom, activates tip-over protection.
• 미끄럼 방지 고무 바닥: 안정성을 제공합니다.

Figure 2: Lerat Electric Space Heater (Front View)

Figure 3: Automatic Anti-Tilt Switch and Non-Slip Rubber Base

2.2 주요 특징

• 빠른 PTC 세라믹 가열: Equipped with 1200W PTC ceramic heating elements for quick warmth in approximately 2 seconds.
• 소형 및 휴대성: Measuring 6.02"L x 4.72"W x 8.66"H and weighing 2.4 pounds, designed for easy portability.
• 다중 모드: Offers Fan Only, Low Heat (600W), and High Heat (1200W) settings for year-round use.
• 조용한 작동: Operates at a low noise level of approximately 35dB, suitable for sleeping, reading, or working environments.
• 포괄적인 안전: Includes Overheat Protection, 45° Tip-Over Protection, and V-0 Flame Retardant Material construction.

Figure 4: Rapid Heating Mechanism

Figure 5: Temperature Settings and Control

3. 설정

1. 풀다: 히터를 포장에서 조심스럽게 꺼내세요. 필요한 경우를 대비해 포장을 보관하세요.
2. 놓기: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater from any walls, furniture, or flammable materials. Do not place it directly under a power outlet.
3. 전원 연결: Ensure the heater's control knob is in the 'OFF' position. Plug the power cord directly into a standard 120V AC electrical wall outlet. Do not use extension cords or adapters.

4. 사용 설명서

The Lerat Electric Space Heater is designed for simple, one-button control.

1. 전원 켜기: Ensure the heater is placed upright on a stable surface. Rotate the control knob clockwise from the 'OFF' position to select your desired mode.
2. 모드 선택:
   • 팬 전용: Rotate the knob to the fan icon for cool air circulation without heat.
   • 낮은 발열(600W): Rotate the knob to the single flame icon for moderate heating.
   • 고열(1200W): Rotate the knob to the double flame icon for maximum heating.
3. 넘어짐 방지: If the heater is tilted or knocked over by more than 45 degrees during operation, the automatic tip-over protection will activate, and the unit will shut off. To resume operation, place the heater back on a stable, upright surface and select your desired mode again.
4. 전원 끄기 : To turn off the heater, rotate the control knob counter-clockwise to the 'OFF' position. Unplug the heater from the wall outlet when not in use.

Figure 6: Tip-Over Protection in Action

5. 유지관리 및 청소

정기적인 청소는 히터의 성능을 유지하고 수명을 연장하는 데 도움이 됩니다.

1. 청소 전: Always turn off the heater and unplug it from the power outlet. Allow the heater to cool down completely before cleaning.
2. 외부 청소: 부드러운 d를 사용하세요amp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners, waxes, or polishes, as these may damage the finish.
3. 공기 흡입구/배출구: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air inlet and outlet grilles. Do not insert any objects into the grilles.
4. 저장: 사용하지 않을 때는 히터를 시원하고 건조한 곳에 보관하세요. 원래 포장 상태로 직사광선과 습기를 피해 보관하는 것이 좋습니다.
5. 분해하지 마십시오: Do not attempt to disassemble or repair the heater yourself. Refer all servicing to qualified service personnel.

6. 문제 해결

히터가 제대로 작동하지 않는 경우 다음의 일반적인 문제와 해결책을 참조하세요.

7. 사양

8. 보증 및 지원

For warranty information or technical support, please refer to the documentation included with your purchase or contact Lerat customer service. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official Lerat store online: Lerat Store on Amazon