1. 서론
Thank you for choosing the SEESII Cordless Tire Inflator Portable Air Compressor T7 MAX. This versatile 3-in-1 device combines a powerful tire inflator, a convenient car vacuum, and an integrated LED light, designed for ease of use and portability. Please read this manual thoroughly before operation to ensure safe and efficient use of your product.
2. 안전 정보
화재, 감전, 신체 상해의 위험을 줄이려면 전기 제품을 사용할 때 항상 기본적인 안전 예방 조치를 준수하세요.
- 기기를 사용하기 전에 모든 지침을 읽으세요.
- 습한 환경이나 가연성 액체 또는 가스 근처에서 인플레이터를 작동하지 마십시오.
- 어린이와 애완동물을 수술 구역에 접근하지 못하게 하세요.
- Use only the provided batteries and charger.
- Do not over-inflate tires. Always refer to the vehicle manufacturer's recommended tire pressure.
- Allow the device to cool down between prolonged uses to prevent overheating.
- 사용하지 않을 때는 기기를 건조하고 안전한 장소에 보관하십시오.
3. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 3-in-1 Multifunctional Inflator
- 에어 호스
- Needle Storage box
- Tapered & Long Nozzles
- Presta/Schrader & Needle-Valve Adapters
- 먼지통
- HEPA 필터 2개
- Short-Bristle & Carpet Brushes
- LED 헤드
- Two Battery Packs (2000mAh each)
- 충전기
- 보관 케이스
Image: All components of the SEESII T7 MAX including the inflator, two batteries, charger, air hose, various nozzles, dust container, and storage case.
4. 제품 오버view
The SEESII T7 MAX is a compact and powerful tool designed for multiple automotive and household tasks. It features a digital display for precise pressure readings, intuitive controls, and a robust brushless motor for enhanced performance and durability.
이미지: 앞면 view of the SEESII Cordless Tire Inflator Portable Air Compressor T7 MAX, highlighting its ergonomic design and digital display.
5. 설정
5.1 배터리 충전
Before first use, fully charge both 2000mAh lithium batteries. Connect the charger to a power outlet and insert the battery pack. The indicator light on the charger will show charging status. A full charge typically takes a few hours.
5.2 액세서리 부착하기
- For Inflation: Screw the air hose into the inflation port on the top of the unit. Select the appropriate nozzle adapter (Presta/Schrader, needle-valve, or tapered) from the built-in storage compartment and attach it to the air hose.
- 진공 청소: Remove the LED head (if attached) and attach the dust container to the main unit. Select the desired vacuum nozzle (short-bristle, carpet brush, or extension wand) and attach it to the dust container.
- LED 조명의 경우: Attach the LED head to the front of the unit where the vacuum dust container would connect.
Image: The SEESII T7 MAX with its various accessories laid out, including the air hose, different nozzles, and the storage case.
5.3 시각적 설정 가이드
Video: This video demonstrates how to set up and use the SEESII 3-in-1 Tire Inflator, Car Vacuum, and Light, showing attachment of various components and basic operation.
6. 사용 설명서
6.1 타이어 인플레이션
- 연결하다: Screw the air hose onto the inflator. Attach the appropriate nozzle adapter to the tire valve stem and secure it.
- 전원 켜기: Press the power button to turn on the inflator. The digital display will show the current tire pressure.
- 압력 설정: Use the '+' and '-' buttons to set the desired pressure. You can switch between PSI, KPA, and BAR units by pressing the 'M' button. For quick settings, select one of the 4 preset modes (Car, Motorcycle, Bike, Ball) by pressing the mode button.
- 인플레이션 시작: Press the trigger to begin inflation. The inflator will automatically stop once the preset pressure is reached.
- 연결 해제: 호스를 밸브 스템에서 조심스럽게 분리하십시오.
Image: The SEESII T7 MAX inflating a car tire, showing the air hose connected to the valve stem.
Image: Close-up of the SEESII T7 MAX digital display showing a pressure reading of 36.0 PSI and control buttons.
6.2 진공 기능
- 모으다: Ensure the dust container and desired vacuum nozzle are securely attached.
- 전원 켜기: 전원 버튼을 누르세요.
- 작동하다: Press the trigger to activate the vacuum. Move the nozzle over the area to be cleaned.
- 빈: When the dust container is full, detach it and empty its contents.
Image: The SEESII T7 MAX being used as a car vacuum, cleaning debris from a car seat.
6.3 LED 조명 기능
The built-in LED light has three modes: Steady, Flash, and SOS. Press the light button to cycle through these modes. This feature is useful for nighttime emergencies or working in dimly lit areas.
Image: A person using the SEESII T7 MAX's LED light to illuminate a car engine bay at night.
7. 유지관리
7.1 Cleaning the Dust Container and Filters
Regularly empty the dust container and clean the HEPA filters to maintain optimal vacuum performance. The filters can be rinsed with water; ensure they are completely dry before reinserting.
7.2 배터리 관리
To prolong battery life, store batteries in a cool, dry place. Avoid fully discharging batteries frequently. Charge them periodically even if not in use.
7.3 보관
Store the inflator and all accessories in the provided storage case to protect them from dust and damage. Keep the device away from extreme temperatures.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 인플레이터가 켜지지 않습니다. | 배터리가 충전되지 않았거나 제대로 삽입되지 않았습니다. | 배터리가 완전히 충전되었고 단단히 삽입되었는지 확인하세요. |
| 인플레이션은 느리거나 효과가 없습니다. | Air hose connection is loose; incorrect nozzle; low battery. | Check all connections; ensure correct nozzle is used; charge battery. |
| Vacuum suction is weak. | Dust container is full; filter is clogged; nozzle is blocked. | Empty dust container; clean or replace HEPA filter; clear any blockages in the nozzle. |
| 기기가 과열되어 꺼집니다. | 장기간 연속 사용. | 기기를 다시 사용하기 전에 최소 15~20분 동안 식히십시오. |
9. 사양
- 상표: 시시
- 모델 번호: T7 맥스
- 권tage: 21 볼트
- 최대 압력: 150파운드
- 기류 수용량: 분당 30리터
- 진공 흡입: 20000파스칼
- 최대 전력: 130 와트
- 소음 수준: 75데시벨
- 배터리 용량: 2000mAh 리튬 배터리 2개
- 재료 유형: 플라스틱
- 추가 기능: Automatic Shut-Off, Cordless, Digital Gauge, LED Light, Portable
10. 보증 및 지원
The SEESII Cordless Tire Inflator Portable Air Compressor T7 MAX comes with a 2년 보증 구매일로부터. 본 보증은 정상적인 사용 중에 발생한 제조상의 결함 및 제조상의 결함을 보장합니다.
For technical assistance, troubleshooting, or warranty claims, please contact SEESII customer support. We offer 24/7 지원 그리고 24-month care 고객님의 만족을 보장하기 위해.
보증 서비스를 위해 구매 증빙서류를 보관하세요.