FORGING MOUNT Full Motion Corner TV Wall Mount

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your FORGING MOUNT Full Motion Corner TV Wall Mount, Model HY9499-B. This mount is designed to securely hold televisions ranging from 32 to 75 inches, with a maximum weight capacity of 110 lbs (50 kg). It offers extensive flexibility, including corner installation, long extension, swivel, tilt, and landscape to portrait rotation, to optimize your view경험.

2. 중요한 안전 정보

Please read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Improper installation may cause product damage or serious injury.

• 중량 용량: Do not exceed the maximum weight capacity of 110 lbs (50 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
• TV 크기 : 이 거치대는 32인치에서 75인치 사이의 TV에 맞게 설계되었습니다.
• 벽 유형: This mount is designed for installation on solid concrete walls, wood studs, or brick walls. 건식벽체에만 설치하지 마십시오.
• 도구: 설치를 시작하기 전에 필요한 모든 도구와 하드웨어가 있는지 확인하십시오.
• 보조: For larger TVs, it is recommended to have two people for installation to prevent injury or damage.
• 어린이와 애완동물: Keep out of reach of children and pets during installation and ensure the TV is securely mounted to prevent accidents.

3. 패키지 내용

Verify that all components are present and undamaged before installation. If any parts are missing or damaged, please contact customer support.

이미지 설명: An illustration detailing all components included in the package, such as the wall plate, TV plate, articulating arms, various M4, M6, M8 screws of different lengths, washers, and spacers. It also shows a spirit level and cable ties.

포함된 하드웨어:

• 벽판 조립체
• TV Plate Assembly
• 관절 암
• Various TV Screws (M4x12, M4x30, M6x15, M6x35, M8x15, M8x45)
• Washers (Ø16xØ8.5x1.5, Ø16xØ5.5x1.5)
• Spacers (L2.5mm, L10mm, L22mm)
• Lag Bolts for wall mounting
• Concrete Anchors (if applicable)
• 수평기
• 케이블 타이
• 사용 설명서
• 드릴링 템플릿

이미지 설명: 자세한 view of the different screw sizes (M4, M6, M8), washers, and spacers provided to ensure compatibility with various TV models.

4. 사양

이미지 설명: A technical diagram illustrating the precise dimensions of the TV wall mount, including the 32.95-inch maximum extension, wall plate measurements (12.59" x 3.74"), and TV plate measurements (17.16" x 25.07").

5. 호환성

TV 크기 및 무게:

This mount is compatible with most flat-panel and curved TVs from 32 to 75 inches, weighing up to 110 lbs (50 kg).

이미지 설명: A visual representation of the mount's wide compatibility, showing it supports TVs from 32 to 75 inches and up to 110 lbs. It also highlights compatible wall types: solid concrete, wood studs, and brick walls, with a warning not to install on drywall alone.

VESA 패턴:

The mount supports VESA mounting patterns from 100x100mm to 600x400mm. Please check the back of your TV for its VESA pattern before installation.

• Minimum VESA: 100x100mm
• Maximum VESA: 600x400mm

이미지 설명: This image displays several common VESA patterns, demonstrating the mount's compatibility with a wide range of TV models. It shows how to measure the VESA pattern on the back of a TV.

벽 유형:

The mount is suitable for installation on:

• 우드 스터드
• 견고한 콘크리트 벽
• 벽돌 벽

경고: Do not install this mount on drywall alone. Always ensure you are mounting into a structural support.

이미지 설명: This image visually clarifies the three types of walls suitable for mounting: wood studs, concrete walls, and brick walls. A warning symbol emphasizes that the mount should not be installed on drywall without proper structural support.

6. 설정 및 설치

Follow these steps carefully for a secure installation. It is highly recommended to watch the installation tutorial video before beginning.

설치 전 확인 사항:

1. Verify your TV's weight and VESA pattern are within the mount's specifications.
2. Identify your wall type (wood stud, concrete, or brick) and ensure it can support the weight of the mount and your TV.
3. Gather all necessary tools (e.g., drill, stud finder, level, screwdriver).

설치 단계:

1. TV 플레이트 부착:
   Secure the TV plate assembly to the back of your TV using the appropriate screws, washers, and spacers. Ensure the plate is centered and firmly attached.
2. 월 플레이트를 설치합니다:
   Using the provided drilling template, mark the desired location on your wall. Drill pilot holes and securely fasten the wall plate assembly to the wall using the lag bolts (and concrete anchors if installing on concrete/brick). Use the included spirit level to ensure the wall plate is perfectly horizontal.
3. Hang the TV to Wall Plate:
   Carefully lift your TV (with the TV plate attached) and hook it onto the wall plate assembly. Secure the TV to the wall plate using the safety screws or locking mechanism.
4. 레벨 조정 :
   After hanging, you can make minor level adjustments (up to +/- 3 degrees) to ensure your TV is perfectly straight.

이미지 설명: A visual guide to the three primary installation steps: 1) Attaching the TV plate to the television, 2) Installing the wall plate to the wall, and 3) Safely hanging the TV onto the installed wall plate.

7. 사용 설명서

Your FORGING MOUNT TV wall mount offers a range of adjustments to achieve the optimal view잉 각도.

확장 및 수축:

Gently pull or push the TV to extend it up to 33 inches from the wall or retract it to a minimum of 2.5 inches for a flush appearance. The articulating arms allow smooth movement.

이미지 설명: This image illustrates the mount's full motion capabilities, showing the TV extending up to 33 inches from the wall and retracting to 2.68 inches. It also highlights the tilt range (-10° to +5°) and the +/-3° level adjustment.

회전 조정:

The mount allows for a +/- 90-degree swivel, enabling you to turn your TV left or right to face different areas of the room. Apply gentle, even pressure to move the TV to your desired angle.

이미지 설명: This image demonstrates the swivel functionality of the mount, allowing the TV to be rotated +/- 90 degrees for flexible viewing from various indoor and outdoor positions.

기울기 조정:

Adjust the tilt angle from -10 degrees (downward) to +5 degrees (upward) to reduce glare and achieve a comfortable viewing position. Loosen the tilt knobs, adjust the angle, and then tighten the knobs to secure the position.

Landscape to Portrait Rotation:

This unique feature allows you to rotate your TV 90 degrees from a standard horizontal (landscape) orientation to a vertical (portrait) orientation. This is ideal for specific content viewing or digital signage applications. Ensure the TV is fully extended and clear of any obstructions before rotating.

이미지 설명: This image highlights the mount's ability to rotate the TV from landscape to portrait orientation, providing a versatile viewing experience, especially useful for vertical content.

코너 설치:

The long extension arm and full motion capabilities make this mount ideal for corner installations, maximizing space and providing optimal viewing angles in rooms where main wall areas are limited.

이미지 설명: 시각적 전ample of the TV mount installed in a room corner, showcasing its effectiveness as a space-saving solution while maintaining full adjustability.

8. 유지관리

정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.

• 정기 점검: Periodically check that all screws and connections are tight and secure. Over time, vibrations or frequent adjustments may cause fasteners to loosen.
• 청소: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• 매끄럽게 하기: The articulating joints are designed for smooth movement. If you notice any stiffness, a small amount of silicone-based lubricant can be applied to the pivot points.
• 중량 제한: Never exceed the specified weight limit of 110 lbs (50 kg).

9. 문제 해결

If you encounter any issues with your TV wall mount, refer to the following common problems and solutions:

10. 보증 정보

The FORGING MOUNT Full Motion Corner TV Wall Mount (Model HY9499-B) comes with a 2년 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, modifications, or unauthorized repairs.

보증 청구를 위해 구매 증명서를 보관하십시오.

11. 고객 지원

If you have any questions, require assistance with installation, or need to make a warranty claim, please contact FORGING MOUNT customer support. Refer to the contact information provided with your product packaging or visit the official FORGING MOUNT web지원 세부 정보 사이트.