diymore Wireless USB-C Soldering Iron Kit

1. 서론

This manual provides essential information for the safe and effective use of your diymore Wireless USB-C Soldering Iron Kit. This portable soldering iron features a built-in 1100 mAh battery, rechargeable via USB-C, offering cordless operation. It includes an LCD display for precise temperature control, adjustable from 180℃ to 450℃ (356°F to 842°F), and boasts rapid heating in approximately 8 seconds. It is designed for various applications such as circuit board repair, jewelry soldering, guitar maintenance, watch repair, and other small electronic DIY projects. Please read this manual thoroughly before first use.

2. 안전 지침

부상이나 장치 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.

• 열 위험: The soldering iron tip reaches high temperatures. Avoid direct contact with skin or flammable materials.
• 통풍: Use in a well-ventilated area to avoid inhaling soldering fumes.
• 눈 보호: Always wear safety glasses to protect against solder splashes.
• 적절한 사용: Only use the device for its intended soldering purpose. Do not use for high-power projects.
• 저장: Allow the soldering iron to cool completely before storing. Store in a safe place, out of reach of children.
• 전원: Use only a 5V/2A USB-C power source for charging.
• 손상: Do not operate if the device or cable is damaged.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x USB Soldering Iron
• 1 x USB-C 충전 케이블
• 1 x Soldering Iron Stand with Sponge
• 3 x Soldering Tips (Round, Horseshoe, Knife Head)
• 1 x Rosin

Figure 3.1: Included components of the diymore Wireless USB-C Soldering Iron Kit.

4. 제품 오버view

Familiarize yourself with the main parts of your soldering iron:

• Soldering Tip: The interchangeable heating element and tip.
• Tip Connector: Where the soldering tip is inserted.
• LCD 디스플레이: Shows current temperature, battery status, and error codes.
• 전원 버튼: 장치를 켜거나 끌 때 사용합니다.
• 온도 조절 버튼(+/-): Used to increase or decrease the temperature.
• USB-C 충전 포트: 충전 케이블을 연결합니다.
• 핸들: Ergonomically designed, heat-resistant TPE material.

그림 4.1: 이상view of the soldering iron's controls and display.

Figure 4.2: Physical dimensions and summarized features of the soldering iron.

5. 설정

5.1. 납땜 인두 충전하기

Before first use, fully charge the soldering iron. Connect the provided USB-C charging cable to the soldering iron's USB-C port and to a 5V/2A USB power adapter (not included). The LCD display will show the battery percentage during charging. A full charge takes approximately 90 minutes and provides 20-30 minutes of continuous operation.

Figure 5.1: USB-C charging and battery specifications.

5.2. Installing/Replacing Soldering Tips

The soldering iron comes with three interchangeable tips: Round, Horseshoe, and Knife Head. To install or replace a tip:

1. 납땜 인두가 꺼져 있고 식었는지 확인하십시오.
2. Gently pull out the current tip from the tip connector.
3. Insert the desired tip firmly into the tip connector until it is securely seated.

Figure 5.2: Replacing soldering iron tips.

6. 사용 설명서

6.1. 전원 켜기/끄기

To turn the soldering iron ON or 끄다, press and hold the Power button for 3 seconds.

6.2. 온도 조절

Once powered on, the LCD will display the current temperature. The soldering iron heats up rapidly, reaching the set temperature in approximately 8 seconds.

• Increase/Decrease Temperature: Click the "+" or "-" button to adjust the temperature by 5℃ (or 9°F) increments. Press and hold the "+" or "-" button for rapid temperature adjustment.
• Switch ℃/°F: Press the "+" and "-" buttons simultaneously to switch between Celsius and Fahrenheit display modes.

Figure 6.1: Intelligent temperature control display.

Figure 6.2: Fast heating performance.

6.3. Sleep Mode and Automatic Shutdown

The soldering iron is equipped with intelligent power management features:

• During Battery Discharge:
  • After 1 minute of inactivity, the device enters sleep mode (display turns OFF).
  • After 5 minutes of inactivity, the device performs an automatic shutdown.
• During Charging and Use:
  • After 3 minutes of inactivity, the device enters sleep mode (display shows OFF + % flicker).
  • After 5 minutes of inactivity, the device performs an automatic shutdown. The battery percentage will flash during charging.
• Wake-up Method: To wake the device from sleep mode, click any temperature adjustment button or gently vibrate the device.

7. 유지관리

Regular maintenance ensures optimal performance and longevity of your soldering iron.

• 팁 세척: Regularly clean the soldering tip using the provided sponge (dampened with water) to remove excess solder and oxidation. This helps maintain efficient heat transfer.
• 팁 교체: Replace soldering tips when they become worn or damaged to ensure proper soldering results. Refer to Section 5.2 for replacement instructions.
• 저장: Always allow the soldering iron to cool down completely before storing it in its case or a safe place.
• 일반 청소: Wipe the body of the soldering iron with a dry, soft cloth. Do not use abrasive cleaners or solvents.

8. 문제 해결

이 섹션에서는 다음과 같은 일반적인 문제에 대해 설명합니다.

Figure 8.1: Display codes for troubleshooting.

9. 사양

10. 보증 및 지원

For warranty information or technical support, please refer to the retailer's return policy or contact diymore customer service directly. Contact details can typically be found on the product packaging or the official diymore web대지.