NOVSIGHT X Series LED Fog Light Instruction Manual

1. 서론

Thank you for choosing the NOVSIGHT X Series LED Fog Light. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED fog lights. Please read this manual thoroughly before use and retain it for future reference.

Image: NOVSIGHT X Series LED Fog Light with Amber Cover.

2. 제품 특징

• Enhanced Vehicle Appearance: The unique X-line design not only improves vehicle aesthetics but also provides clear road illumination.
• Exceptional Lighting Performance: Delivers powerful brightness for clear visibility in challenging conditions such as night, rain, or fog. Illuminates dark off-road trails, enhancing night driving safety.
• Wide-Angle Off-Road Illumination: Designed for broad coverage, providing extensive illumination and comprehensive visibility for safe and exhilarating off-road adventures.
• 방수 및 내구성이 뛰어난 구조: Features an IP68 waterproof rating, ensuring reliable performance in harsh environments and all off-road challenges.
• 간편한 설치: Includes a removable amber cover for enhanced safety in adverse weather and a plug-and-play wiring harness for straightforward setup and immediate use.

3. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• Pod Light x 2
• Wiring Harness x 1 set
• 드라이버 x 1
• Standing Bracket x 2
• Big Screw x 2
• Big Spacer x 2
• Cover (Amber) x 2
• 나사 x 4
• 스페이서 x 4
• 너트 x 2
• Big Screw Washer x 2
• Screw Washer x 4

Image: All components included in the NOVSIGHT X Series LED Fog Light package.

4. 사양

Image: Detailed product dimensions and specifications for the NOVSIGHT X Series LED Fog Light.

5. 설정 및 설치

Follow these steps to install your NOVSIGHT X Series LED Fog Lights:

1. Step 1: Prepare and Mount the Lights
   Ensure all accessories are present. Install the pod light at your desired location on the vehicle using the provided brackets and hardware. Securely fasten all screws and nuts.
2. Step 2: Identify Wiring Harness Connections
   Locate the four different color link wires at the end of the wiring harness. Confirm that the harness insulation is intact and ready for connection.
3. Step 3: Connect Link Wires
   Connect and match the four color link wires. Each color corresponds to a different light type (e.g., amber, white DRL, main light). Ensure proper connections for correct functionality.
4. 4단계: 전원 공급 장치에 연결
   Install the link wires to the positive (+) and negative (-) terminals of your vehicle's power supply (battery). Pay close attention to the color coding and polarity of the wires to prevent damage.
5. 5단계: 기능 테스트
   After installation, check if the light turns on normally. Verify that the light type control button functions correctly and switches between the different light modes as expected.

6. 사용 설명서

Your NOVSIGHT X Series LED Fog Lights are designed for ease of use. Once installed, operate them as follows:

1. 전원 켜기/끄기: Use the designated control button on the wiring harness to turn the lights on or off.
2. 조명 모드 전환: Press the mode selection button to cycle through the available light types: Amber DRL, Main Light (White), and White DRL. The lights will change accordingly.

Image: Comparison of amber (1700K) and white (6000K) light modes.

Image: Control button for switching between amber, main, and white DRL modes.

7. 유지관리

To ensure the longevity and optimal performance of your NOVSIGHT X Series LED Fog Lights, follow these maintenance guidelines:

• 정기 청소: Clean the light lenses and housing periodically with a soft cloth and mild soap solution. Avoid abrasive cleaners that could scratch the lens.
• 배선 검사: Regularly check the wiring harness for any signs of wear, fraying, or damage. Ensure all connections remain secure.
• 장착 확인: Periodically inspect the mounting brackets and hardware to ensure they are tight and secure. Re-tighten if necessary.
• 고압 세척을 피하십시오: While the lights are waterproof, avoid directing high-pressure water jets directly at the light housing or wiring connections, as this could potentially compromise seals over time.

8. 문제 해결

If you encounter issues with your NOVSIGHT X Series LED Fog Lights, refer to the following common troubleshooting steps:

• 표시등이 켜지지 않음:
  가능한 원인: Loose wiring connection or no power.
  해결책: Check all wiring connections, especially to the vehicle's battery. Ensure the battery has sufficient charge. Verify the fuse in the wiring harness is not blown.
• Incorrect Light Mode:
  가능한 원인: Incorrect wiring of the color-coded link wires.
  해결책: Review Step 3 of the installation instructions and ensure the link wires are correctly matched to their corresponding light types.
• 깜빡거리는 불빛:
  가능한 원인: 불안정한 전원 공급 또는 느슨한 연결.
  해결책: Check battery terminals for corrosion and ensure they are tight. Inspect all wiring for secure connections and proper insulation.
• Water Inside Lens:
  가능한 원인: Damage to the housing or seals.
  해결책: Although rated IP68, extreme conditions or physical damage can compromise seals. If water ingress occurs, contact customer support.

If these steps do not resolve the issue, please contact NOVSIGHT customer support for further assistance.

9. 보증 및 지원

Your NOVSIGHT X Series LED Fog Light comes with a 2년 제조업체 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

보증은 다음 사항을 포함하지 않습니다:

• 부적절한 설치 또는 오용으로 인한 손상.
• 사고, 학대 또는 방치로 인해 발생한 손상.
• 정상적인 마모 및 파손.
• 무단 수리 또는 개조.

For warranty claims or technical support, please contact NOVSIGHT customer service through your retailer or the official NOVSIGHT website. Please have your proof of purchase and product model information ready.