MIATONE T-01A PRO

MIATONE Seattle T-01A PRO 무선 헤드폰 사용 설명서

Model: T-01A PRO

소개

Thank you for choosing the MIATONE Seattle T-01A PRO Wireless Headphones. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your headphones. Please read it carefully to ensure optimal performance and longevity of your device.

설정

1. 패키지 내용

시작하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.

  • MIATONE Seattle T-01A PRO Headphones x 1
  • USB-C & USB-A Charging Cable x 1
  • 3.5mm AUX 오디오 케이블 x 1
  • 휴대용 케이스 x 1
  • 사용 설명서 x 1
MIATONE Seattle T-01A PRO headphones and accessories laid out
Image: Contents of the MIATONE Seattle T-01A PRO package, including headphones, cables, and carrying case.

2. 헤드폰 충전

The headphones come with a built-in rechargeable Lithium Ion battery. Before first use, fully charge the headphones.

  1. 충전 케이블의 USB-C 단자를 헤드폰의 USB-C 포트에 연결하세요.
  2. 충전 케이블의 USB-A 쪽을 호환되는 USB 전원 어댑터(별매)나 컴퓨터의 USB 포트에 연결합니다.
  3. 헤드폰의 LED 표시등은 충전 중에 켜지고, 완전히 충전되면 색상이 바뀌거나 꺼집니다.

Note: A full charge typically takes approximately 2-3 hours. A quick 5-minute charge can provide up to 10 hours of playtime.

3. 전원 켜기 / 끄기

  • 전원을 켜려면: 전원 버튼을 약 3초 동안 길게 누르면 LED 표시등이 깜빡입니다.
  • 전원을 끄려면: LED 표시등이 꺼질 때까지 약 3초 동안 전원 버튼을 길게 누릅니다.

4. 블루투스 페어링

무선 오디오를 사용하려면 헤드폰을 기기(스마트폰, 태블릿, 컴퓨터)와 페어링하세요.

  1. 헤드폰의 전원이 꺼져 있는지 확인하십시오.
  2. 전원 버튼을 약 5~7초 동안 길게 누르면 LED 표시등이 빠르게 깜빡입니다(일반적으로 파란색과 빨간색). 이는 페어링 모드에 진입했음을 나타냅니다.
  3. 기기에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
  4. Select "MIATONE Seattle" from the list of found devices.
  5. Once connected, the LED indicator on the headphones will slowly flash blue or remain solid blue.

5. 유선 연결(AUX 모드)

You can use the headphones with a wired connection using the included 3.5mm AUX cable.

  1. Connect one end of the 3.5mm AUX cable to the audio input port on the headphones.
  2. 3.5mm AUX 케이블의 다른 쪽 끝을 기기의 오디오 출력 잭에 연결하세요.
  3. 헤드폰이 자동으로 유선 모드로 전환됩니다. 블루투스 기능은 비활성화됩니다.

작동 지침

1. 통제view

The headphones feature intuitive controls located on the earcups. Refer to the diagram in your physical manual for exact button placement.

  • 전원 버튼: Power On/Off, Pairing Mode.
  • 볼륨 높이기/다음 트랙 버튼: 짧게 누르면 볼륨이 커지고, 길게 누르면 다음 곡으로 넘어갑니다.
  • 볼륨 낮추기/이전 트랙 버튼: 짧게 누르면 볼륨 감소, 길게 누르면 이전 곡 재생입니다.
  • 다기능 버튼(MFB): 재생/일시정지, 전화 받기/끊기, 음성 비서 활성화.
  • ANC/투명 모드 버튼: 노이즈 캔슬링, 투명 모드, 일반 모드를 순환하며 사용하세요.

2. 소음 제거 모드

The MIATONE Seattle T-01A PRO headphones feature Hybrid Active Noise Cancelling (ANC) and an External Sound Intake (Transparency) mode.

  • 능동 소음 제거(ANC): Reduces ambient noise by up to 48dB, ideal for travel or noisy environments.
  • External Sound Intake (Transparency Mode): Allows you to hear your surroundings without removing the headphones, useful for announcements or conversations.
  • 일반 모드: ANC 및 투명 모드가 꺼져 있습니다.

Press the dedicated ANC/Transparency Mode button to cycle through these modes.

Woman wearing MIATONE Seattle T-01A PRO headphones, illustrating noise cancellation in various environments
Image: A user wearing the headphones, demonstrating the effectiveness of noise cancellation in different settings like trains, airplanes, and cafes.

3. 함수 호출

The headphones are equipped with 5 AI microphones for clear call quality.

  • 전화 받기: MFB를 짧게 누릅니다.
  • 통화 종료: 통화 중에 MFB를 짧게 누르세요.
  • 전화 거부: MFB를 2초 동안 길게 누릅니다.
  • Voice Assistant 활성화 : Double-press the MFB (when not on a call).
Woman wearing MIATONE Seattle T-01A PRO headphones, highlighting clear call quality with AI noise cancellation
Image: A user wearing the headphones, emphasizing the clarity of calls due to the 5 AI microphones and noise cancellation technology.

4. 음악 재생

  • 재생/일시 중지: MFB를 짧게 누릅니다.
  • 다음 트랙: 볼륨 높이기 버튼을 길게 누르세요.
  • 이전 트랙 : 볼륨 낮추기 버튼을 길게 누르세요.
  • 볼륨 업: 볼륨 높이기 버튼을 짧게 누르세요.
  • 볼륨 작게 : 볼륨 낮추기 버튼을 짧게 누르세요.

5. 멀티포인트 연결

이 헤드폰은 두 개의 블루투스 장치에 동시에 연결할 수 있습니다.

  1. 헤드폰을 첫 번째 기기(예: 스마트폰)와 페어링하세요.
  2. 첫 번째 기기의 블루투스 연결을 해제하세요.
  3. Pair the headphones with the second device (e.g., laptop).
  4. 첫 번째 기기에서 블루투스를 다시 연결하세요. 이제 헤드폰이 두 기기 모두에 연결될 것입니다.

Note: Only one device can play audio at a time. The headphones will automatically switch audio source to the device that is actively playing or receiving a call.

MIATONE Seattle T-01A PRO headphones connected to a smartphone and a laptop, demonstrating multipoint connectivity
Image: The headphones are shown simultaneously connected to a smartphone and a laptop, illustrating the multipoint connection feature for seamless switching between devices.

유지

1. 청소

  • 부드럽고 건조하며 보푸라기가 없는 천을 사용하여 헤드폰을 닦으세요.
  • 연마성 세척제, 용제 또는 화학 스프레이를 사용하지 마십시오.
  • 어떠한 구멍에도 습기가 들어가지 않도록 주의하세요.

2. 보관

사용하지 않을 때는 먼지, 긁힘 및 충격으로부터 보호하기 위해 제공된 휴대용 케이스에 헤드폰을 보관하십시오.

MIATONE Seattle T-01A PRO headphones and carrying case
Image: The MIATONE Seattle T-01A PRO headphones alongside their protective carrying case, demonstrating proper storage.

3. 배터리 관리

  • 배터리를 극한 온도(더위나 추위)에 노출시키지 마세요.
  • Do not store the headphones for extended periods with a completely depleted or fully charged battery. Aim for around 50% charge for long-term storage.
  • 배터리 수명을 유지하려면 자주 사용하지 않더라도 헤드폰을 정기적으로 충전하세요.

문제 해결

문제가능한 해결책
헤드폰의 전원이 켜지지 않습니다.헤드폰이 충전되어 있는지 확인하세요. USB-C 케이블을 사용하여 전원에 연결하세요.
기기와 페어링할 수 없습니다.Ensure headphones are in pairing mode (rapidly flashing LED). Turn off and on Bluetooth on your device. Clear previous Bluetooth connections on your device.
소리가 나지 않거나 볼륨이 작습니다.Check volume levels on both headphones and the connected device. Ensure headphones are properly connected (Bluetooth or AUX). Try another audio source.
ANC는 효과적이지 않습니다.Ensure ANC mode is activated. Check that the earcups form a good seal around your ears.
통화 품질이 좋지 않습니다.Ensure microphones are not obstructed. Move closer to your connected device. Check network signal strength.

명세서

  • 모델 이름: T-01A PRO
  • 상표: 미아토네
  • 소음 제어: 하이브리드 노이즈 캔슬링(최대 48dB)
  • 연결 기술 : 무선(블루투스 5.4), 유선(3.5mm AUX)
  • 운전자: 40mm + 10mm Dual Dynamic Drivers
  • 마이크: 5 AI Mics for Call Noise Cancellation
  • 배터리 수명: Up to 60 hours (Normal Mode), Up to 45 hours (ANC Mode)
  • 빠른 충전: 5분 충전으로 10시간 재생 가능
  • 특별 기능: Foldable, Lightweight, Multipoint Pairing, External Sound Intake Mode
  • 귀 위치: 귀에
  • 폼 팩터: 귀 위
  • 임피던스: 32옴
  • 배터리 유형: 12V Lithium Ion (included, rechargeable)
  • 품목 무게: 530g
  • 패키지 크기: 21.6 x 17.8 x 7.4cm

보증 정보

MIATONE products are covered by a limited warranty from the date of purchase. Please refer to the warranty card included in your package or visit the official MIATONE web보증 범위, 기간 및 청구 절차에 대한 자세한 약관은 해당 사이트에서 확인하세요.

고객 지원

If you encounter any issues not covered in this manual or require further assistance, please contact MIATONE customer support through the following channels:

  • 공식적인 Web대지: Visit the MIATONE official webFAQ, 지원 리소스, 연락처 정보를 제공하는 사이트입니다.
  • 이메일 지원: 보증 카드 또는 공식 서비스 약관을 참조하십시오. web고객 지원 이메일 주소 사이트.

Please have your product model (T-01A PRO) and purchase details ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.