SISIGAD 어린이용 전동 스쿠터 (모델 YD531S) - 사용 설명서

1. 서론

Thank you for choosing the SISIGAD Electric Scooter, Model YD531S. This manual provides essential information for the safe assembly, operation, and maintenance of your scooter. Designed for children aged 6-12, this scooter features an adjustable handlebar, LED light-up deck, and a safe pedal-activated motor. Please read this manual thoroughly before first use to ensure a safe and enjoyable experience.

Image: The SISIGAD Electric Scooter (Model YD531S) in blue, showcasing its vibrant LED lights and playful design elements.

2. 안전 지침

Prioritizing safety is crucial when operating the electric scooter. Adhere to the following guidelines:

• 보호 장비: 항상 헬멧, 무릎 패드, 팔꿈치 패드를 착용하십시오.
• 성인 감독: 어린이는 탑승 시 항상 어른의 감독을 받아야 합니다.
• 라이딩 환경: Ride in safe, open areas away from traffic, pedestrians, and obstacles. Avoid riding on uneven surfaces, steep inclines, or in wet conditions.
• 주행 전 점검: Before each ride, ensure all fasteners are securely tightened, the brakes are functioning correctly, and the battery has sufficient charge.
• 체중 및 연령 제한: The scooter is designed for riders aged 6-12 years with a maximum weight of 110 pounds (50 kg). Do not exceed these limits.
• 발 배치: Keep both feet on the deck while riding.
• 제동: Familiarize yourself with the rear fender brake and practice stopping safely.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• SISIGAD Electric Scooter (Main Unit)
• 충전 어댑터
• 조립 도구 (육각 렌치)
• 사용자 설명서

4. 조립

The SISIGAD Electric Scooter requires minimal assembly. Follow these steps:

1. 풀다: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. 핸들바 부착: Insert the handlebar stem into the main scooter body. Align the holes.
3. 안전한 핸들바: Use the provided Allen wrench to tighten the bolts that secure the handlebar in place. Ensure it is firm and does not wobble.
4. 초기 청구 : For optimal performance, fully charge the scooter before its first use. Refer to the 'Charging the Battery' section for details.

Image: Labeled components of the scooter, highlighting the handlebar, LED lights, and pedal accelerator.

For a visual guide on assembly and features, please watch the official product video below:

5. 사용 설명서

Operating the SISIGAD Electric Scooter is straightforward:

• 전원 켜기: The scooter is designed with a pedal gravity start setting. The motor will activate only when a rider's foot presses the start button on the pedal.
• 라이딩 시작: Place one foot firmly on the scooter's deck. Use your other foot to push off from the ground, gaining initial momentum. Once moving, place your second foot on the deck, pressing the pedal button to engage the electric motor.
• 승마: Maintain balance and steer by gently leaning in the desired direction. The scooter's LED lights on the deck and wheels will activate, enhancing visibility and adding to the riding experience.
• 제동: To slow down or stop, press your foot down firmly on the rear wheel fender. This activates the rear brake.

Image: Illustration of the pedal-activated start mechanism and key performance metrics.

6. 핸들바 높이 조절

The handlebar height can be adjusted to three levels (32, 34, and 36 inches) to accommodate growing children:

1. 터놓다: 퀵 릴리스 버튼을 찾으세요amp 핸들바 스템에 있습니다. 뚜껑을 여세요.amp to loosen the handlebar.
2. 조정하다: Press the adjustment button (or pin) on the stem and slide the handlebar up or down to the desired height. Ensure the button clicks into one of the three height-adjustment holes.
3. 잠그다: 퀵 릴리스 cl을 닫습니다.amp firmly to secure the handlebar at the chosen height. Verify that the handlebar is stable before riding.

Image: Visual representation of the adjustable handlebar heights for different age groups.

7. 배터리 충전

To charge the scooter's 18V/2.6AH battery:

1. 충전 포트 찾기: The charging port is typically located on the side of the scooter's deck.
2. 충전기 연결: Plug the charging adapter into a standard wall outlet, then connect the other end to the scooter's charging port.
3. 충전 표시기: The charging adapter usually has an indicator light (e.g., red for charging, green for fully charged).
4. 충전 시간: 완전 충전에는 일반적으로 4~6시간이 소요됩니다. 과충전하지 마십시오.
5. 연결 해제: 충전이 완료되면 충전기를 스쿠터와 벽면 콘센트에서 분리하십시오.

이미지: 상세 view of the scooter's battery compartment and charging specifications.

8. 유지관리

정기적인 유지보수는 스쿠터의 수명 연장과 안전한 작동을 보장합니다.

• 청소: 광고로 스쿠터를 닦으세요amp 사용 후에는 천으로 닦아주세요. 강한 화학약품이나 과도한 물 사용을 피해주세요.
• 패스너: Periodically check all screws and bolts to ensure they are tight. Tighten as needed.
• 바퀴: Inspect the 5.3-inch polyurethane wheels for wear or damage.
• 브레이크: Ensure the rear fender brake is clean and functions effectively.
• 저장: 스쿠터는 직사광선과 극한의 온도를 피해 건조하고 서늘한 곳에 보관하세요.

9. 문제 해결

If you encounter issues with your scooter, refer to this section:

• 스쿠터 시동이 걸리지 않음:
  • 배터리가 충전되어 있는지 확인하십시오.
  • Ensure the rider's foot is firmly pressing the pedal start button while pushing off.
• LED 조명이 작동하지 않음:
  • The lights are motion-activated; ensure the scooter is in motion.
  • Check for any visible damage to the light strips.
• Reduced Speed or Range:
  • 배터리가 부족할 수 있습니다. 완전히 충전하세요.
  • Rider's weight exceeds the maximum limit.
  • Riding on inclines or rough terrain can reduce performance.

10. 사양

11. 보증 및 지원

The SISIGAD Electric Scooter comes with a 90일 한정 보증 from the date of purchase. This warranty covers manufacturing defects under normal use. For any questions, concerns, or warranty claims, please contact our customer service team. We offer 24-hour customer service to assist you.

제조업체: Shenzhen Uni-mobility Intelligent Technology Co., Ltd.

한국어: 746364629722