소개
Thank you for choosing the Elitech TM-2TH Digital Thermometer Hygrometer. This device is designed for precise monitoring of temperature and humidity in various environments, including refrigerators, freezers, wine cabinets, and more. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.
제품 특징
The Elitech TM-2TH offers precision monitoring with a temperature range of -10°C to 50°C and a humidity range of 10% to 95% RH. It features ultra-long battery life, flexible installation options, and a °C/°F toggle function.
This device provides high accuracy with ±1°C temperature accuracy and ±5% RH precision (within 30%~85% RH range), ensuring reliable readings for critical environments.
The TM-2TH automatically records and displays maximum and minimum temperature and humidity values, allowing users to track environmental fluctuations over time.
Designed for versatility, the thermometer hygrometer can be installed in three ways: hanging via its integrated hook, standing on a flat surface, or magnetically attached to metal surfaces.
The TM-2TH is suitable for a wide range of applications, including monitoring conditions in wine cabinets, medicine cabinets, refrigerators, camping boxes, and baby's fridges.
명세서
| 모델 | TM-2TH |
| 온도 범위 | -10°C ~ 50°C(14°F ~ 122°F) |
| 온도 정확도 | ±1°C (±1.8°F) |
| 습도 범위 | 상대습도 10% ~ 95% |
| 습도 정확도 | ±5% RH (within 30%~85% RH) |
| 배터리 유형 | 1 x CR2032 (포함) |
| 제품 참조 | TM-2TH-2Pack |
| 패키지 크기(대략) | 15.4 x 9.5 x 6.5cm |
| 패키지 무게(대략) | 90그램 |
| 원산지 | 중국 |
설정
1. 배터리 설치
- 장치 뒷면에서 배터리 덮개를 찾으세요.
- Open the cover by sliding or gently prying it off.
- Insert one CR2032 battery, ensuring the positive (+) side faces upwards.
- Replace the battery compartment cover securely. The device should power on automatically and display current temperature and humidity.
2. 배치
The TM-2TH offers multiple placement options:
- 서 있는: 통합된 받침대를 사용하여 장치를 평평한 표면에 놓으세요.
- 교수형: Utilize the built-in hook to hang the device from a rack or hook.
- 자기: Attach the device to any metallic surface, such as a refrigerator door, using its magnetic backing.
Choose a location that provides accurate readings for the area you wish to monitor, avoiding direct sunlight or heat sources.
작동 지침
1. Reading Display
Upon activation, the device will display the current temperature and relative humidity. The temperature is typically shown in degrees Celsius (°C) or Fahrenheit (°F), and humidity as a percentag전자(%).
2. 온도 단위 변경 (°C/°F)
Locate the °C/°F button, usually on the back or side of the device. Press this button to toggle between Celsius and Fahrenheit temperature units.
3. View최대/최소 기록
이 장치는 마지막 재설정 이후 최고(MAX) 및 최저(MIN) 온도와 습도 값을 자동으로 기록합니다. view 이 기록들:
- 를 누르세요 최대/최소 최대 기록값을 표시하려면 버튼을 한 번 누르세요.
- 를 누르세요 최대/최소 최소 기록값을 표시하려면 버튼을 다시 누르세요.
- Press it a third time to return to the current temperature and humidity display.
4. Resetting MAX/MIN Records
To clear the recorded MAX/MIN values and start a new recording cycle:
- 하는 동안 viewing the MAX or MIN records, press and hold the 최대/최소 버튼을 약 3초간 누릅니다.
- The display will flash, indicating that the records have been reset to the current temperature and humidity.
유지
1. 배터리 교체
When the display becomes dim or the device stops functioning, it is time to replace the CR2032 battery. Follow the battery installation steps in the "Setup" section to replace the battery.
2. 청소
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water. Ensure the sensor openings are free from dust and debris for accurate readings.
3. 보관
장기간 기기를 사용하지 않을 경우, 누액을 방지하기 위해 배터리를 분리하여 서늘하고 건조한 곳에 보관하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 없거나 어둡습니다 | 배터리가 소진되었거나 잘못 설치되었습니다. | Replace the CR2032 battery or ensure it is installed with correct polarity. |
| 부정확한 판독 | Sensor blocked or device placed near heat/cold source. | Ensure sensor openings are clear. Relocate the device to a more representative area. Allow time for readings to stabilize. |
| MAX/MIN values not resetting | 버튼을 충분히 오래 누르지 않았습니다. | Press and hold the MAX/MIN button for at least 3 seconds until the display flashes. |
보증 및 지원
Elitech provides a standard warranty for its products. For specific warranty terms, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Elitech web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
공식 엘리텍 Web대지: www.엘리테크로그.com