ASUS Prime AP202 ARGB White mATX PC Case Instruction Manual

1. 서론

The ASUS Prime AP202 ARGB White mATX case is designed for compact, high-performance PC builds. It features a fully curved tempered glass panel, supports graphics cards up to 420mm, 360mm radiators, and includes a patented slot vent, easy-detach rail system, and three pre-installed ARGB fans. This manual provides detailed instructions to help you set up, operate, and maintain your PC case.

2. 주요 특징

• Panoramic Curved Tempered Glass: A seamless curved tempered glass panel extends from the front to the side, offering an unobstructed view 내부 구성 요소.
• Easy-Detach Rail System: Panels can be removed and reattached safely and simply, facilitating easy access for building and maintenance.
• Patented Slot Vent: An innovative design provides optimal cooling for graphics cards, enhancing thermal performance.
• Integrated ARGB Light Band: A light band near the bottom of the case offers spectacular lighting effects, compatible with Aura Sync for seamless adaptation to user scenarios.
• ARGB 팬 사전 설치됨: Three 120mm ARGB fans with extra-thick 28mm frames are included, providing optimal airflow and integrated with 20 addressable RGB LEDs for dual lighting.

Figure 1: ASUS Prime AP202 ARGB White mATX PC Case with curved tempered glass and internal ARGB fans.

3. 설정 및 설치

Follow these steps to assemble your PC components within the ASUS Prime AP202 ARGB White mATX PC case.

3.1. 패널 제거

The case features an easy-detach rail system for safe and simple panel removal. Gently pull the panels to detach them, providing full access to the internal chassis for component installation.

그림 2: 폭발 view illustrating detachable panels and components for easy assembly.

3.2. 마더보드 설치

The ASUS Prime AP202 supports Micro-ATX and Mini-ITX motherboards. Secure your motherboard to the pre-installed standoffs using the provided screws.

3.3. 팬 및 라디에이터 설치

The case supports radiators up to 360mm long. Three 120mm ARGB fans are pre-installed. Additional fans can be mounted for enhanced airflow. Ensure proper airflow direction (intake/exhaust) for optimal cooling.

Figure 3: Patented slot vent design for optimal graphics card cooling.

3.4. 그래픽 카드 설치

The case accommodates graphics cards up to 420mm in length. Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with screws.

3.5. 전원 공급 장치(PSU) 설치

The case is compatible with PSUs up to 200mm in length. Install your PSU into its designated compartment, typically at the rear or bottom of the case, and secure it.

3.6. 케이블 관리

활용하다 ample space behind the motherboard tray and the included cable ties to route and secure cables, ensuring clean aesthetics and unobstructed airflow.

Figure 4: Organized cable management for a clean build.

4. 사용 설명서

4.1. 전원 켜기/끄기

Press the power button located on the front I/O panel to turn the system on or off. The power LED will illuminate when the system is active.

4.2. ARGB 조명 제어

The integrated ARGB light band and pre-installed fans are compatible with ASUS Aura Sync. Use the motherboard's software to customize lighting effects and synchronize them with other compatible components.

Figure 5: Integrated ARGB light band for customizable lighting effects.

Figure 6: Front I/O panel with power button and USB ports.

5. 유지관리

5.1. 먼지 필터 청소

Regularly clean the dust filters to maintain optimal airflow and prevent dust buildup inside the case. The filters are easily removable for cleaning.

5.2. 일반 청소

케이스 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 강화유리 패널은 긁힘 방지를 위해 유리 세정제와 극세사 천을 사용하십시오.

6. 문제 해결

6.1. 힘이 없다

• Ensure the power supply unit (PSU) is properly connected to the wall outlet and the power switch on the PSU is in the "ON" position.
• 파워서플라이의 모든 전원 케이블이 마더보드 및 구성 요소에 제대로 연결되어 있는지 확인하십시오.
• 전면 패널 전원 스위치와 마더보드의 연결 상태를 확인하십시오.

6.2. 과열 문제

• Ensure all case fans are spinning and properly oriented for optimal airflow (front/bottom for intake, rear/top for exhaust).
• 팬, 라디에이터 및 먼지 필터에 쌓인 먼지를 청소하십시오.
• CPU 쿨러와 GPU 팬이 제대로 작동하는지 확인하십시오.

6.3. ARGB 조명이 작동하지 않음

• Check all ARGB cable connections from the fans and light band to the motherboard's ARGB headers or a dedicated controller.
• Ensure ASUS Aura Sync software (or equivalent motherboard software) is installed and configured correctly.

7. 사양

8. 보증 및 지원

보증 정보, 기술 지원 또는 서비스 문의는 ASUS 공식 지원 페이지를 방문하십시오. website or contact your local ASUS representative. Keep your purchase receipt for warranty validation.

ASUS 지원 Web대지: https://www.asus.com/support/