사용 설명서

소개

This manual provides essential instructions for the installation, operation, and maintenance of the Fricpart-105171 Washer Water Drain Pump. This component is designed as a replacement part compatible with Kenmore washing machine model 796.40311900. Please read this manual thoroughly before attempting any installation or repair to ensure safe and correct usage.

안전 정보

• Always disconnect the washing machine from the power supply before attempting any service or installation.
• Turn off the water supply to the washing machine before beginning any work.
• 설치하는 동안 장갑, 보안경 등 적절한 개인 보호 장비를 착용하세요.
• Ensure all connections are secure and leak-free after installation to prevent water damage.
• 어떤 단계에 대해 확신이 없다면 자격을 갖춘 가전제품 기술자에게 문의하세요.

패키지 내용

귀하의 패키지에는 다음 품목이 포함되어야 합니다.

• One (1) Fricpart-105171 Washer Water Drain Pump

This image displays the Fricpart-105171 washer water drain pump. It features a black housing with a visible white three-bladed impeller inside a grey circular chamber. Mounting holes are visible on the black flange.

설정 및 설치

1. 준비: Before beginning, ensure the washing machine is completely disconnected from its power source and the water supply is turned off.
2. 펌프에 접근하세요: Refer to your specific Kenmore 796.40311900 washing machine's service manual for instructions on how to safely access and remove the existing drain pump. This typically involves removing panels or tilting the machine.
3. 호환성 확인: Carefully compare the new Fricpart-105171 drain pump with the original part to confirm it is the correct replacement for your Kenmore 796.40311900 model. Appliance parts can appear similar, so verification is crucial.
4. 오래된 펌프 제거: Disconnect any electrical wiring and hoses attached to the old drain pump. Be prepared for residual water to drain out. Remove the mounting screws or clips securing the old pump.
5. 새 펌프 설치: Position the new Fricpart-105171 drain pump in place and secure it with the appropriate mounting hardware.
6. 호스와 배선을 연결하세요: Reattach all hoses, ensuring they are clamped securely to prevent leaks. Reconnect the electrical wiring to the new pump. Double-check all connections.
7. 누출 테스트: Before fully reassembling the washer, slowly turn on the water supply and check for any leaks around the newly installed pump and hose connections. Address any leaks immediately.
8. 복원력 : Once satisfied that there are no leaks, restore power to the washing machine.
9. 테스트 작업: Run a short drain cycle or a complete wash cycle to confirm the new drain pump is functioning correctly.

작동 지침

The Fricpart-105171 Washer Water Drain Pump operates automatically as an integral part of your washing machine's cycle. It is designed to remove water from the wash tub during the drain and spin phases. No manual operation or intervention is required for the pump itself once correctly installed.

유지

배수 펌프의 수명 연장과 효율적인 작동을 위해 다음 유지 관리 요령을 고려하십시오.

• 정기 검사: Periodically inspect the drain pump and its connecting hoses for any signs of wear, cracks, blockages, or leaks.
• 잔해물 청소: If your washing machine model includes a pump filter or coin trap, regularly clean it to prevent debris from obstructing the pump's impeller. Refer to your washer's user manual for filter location and cleaning instructions.
• 과부하를 피하세요: Overloading the washing machine can put undue stress on the drain system, including the pump.

문제 해결

If you encounter issues with your washing machine's draining function, consider these common troubleshooting steps:

• Washer Not Draining:
  • 배수 호스에 꼬임이나 막힘이 있는지 확인하십시오.
  • Inspect the pump filter (if applicable) for debris.
  • Ensure the pump is receiving electrical power.
  • Verify the pump impeller is not obstructed by foreign objects.
• Unusual Noises During Drain Cycle:
  • Foreign objects may be caught in the pump. Disconnect power and inspect the pump chamber.
  • 펌프가 단단히 고정되어 있고 다른 부품에 부딪혀 진동하지 않는지 확인하십시오.
• Leaks Around the Pump:
  • Check all hose connections for tightness and proper sealing.
  • Inspect the pump housing for any cracks or damage.

이러한 조치로 문제가 해결되지 않으면 전문가의 도움이 필요한 더 복잡한 문제일 수 있습니다.

명세서

보증 및 지원

Warranty information for this replacement part may be available from the seller or manufacturer. Please refer to your purchase documentation or contact the point of sale for specific details regarding warranty coverage.

For technical assistance, installation guidance, or further inquiries, please contact the seller or manufacturer directly using the contact information provided with your purchase.