STRICH SW-2

STRICH SW-2 Guitar Wah & Volume Pedal Instruction Manual

모델 : SW-2

소개

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your STRICH SW-2 Guitar Wah & Volume Pedal. The SW-2 is a versatile 2-in-1 effects pedal designed for electric guitars, offering both vintage wah tones and active volume control. Please read this manual thoroughly to ensure proper use and to maximize the pedal's capabilities.

제품 끝view

The STRICH SW-2 pedal integrates two essential guitar effects into a single, robust unit. It features a durable full-size design and comes with a dedicated power supply for immediate use.

주요 특징:

  • Complete Ready-to-Use Kit: Includes a genuine 9V 1A power adapter for stable power supply.
  • 듀얼 모드 디자인: vin을 결합합니다tage wah pedal tones with active volume control.
  • 6-Channel Wah Frequency Control: Offers six selectable center frequencies for customizable wah effects.
  • Tonal Versatility: Adjust the Quality knob to fine-tune resonance and intensity.
  • Linear Volume Control: Provides smooth, precise volume swells for dynamic performance.
STRICH SW-2 pedal showing 3 modes: Wah, Volume, True Bypass
그림 1: 이상view of the 3-in-1 functionality (Wah, Volume, True Bypass).

설정

  1. 전원 연결: Connect the included 9V 1A power adapter to the DC IN jack on the pedal and then to a standard electrical outlet.
  2. 계기 연결: Connect your electric guitar to the INPUT jack on the pedal using a standard 1/4-inch instrument cable.
  3. Amplifier 연결: Connect the OUTPUT jack on the pedal to your guitar amp앰프 입력단에 다른 표준 1/4인치 계측기 케이블을 사용합니다.
  4. 놓기: Position the pedal on a stable surface or your pedalboard. Ensure the rubber feet provide adequate grip.
STRICH SW-2 pedal with power supply connected
Figure 2: The STRICH SW-2 pedal connected to its power supply.

작동 지침

The STRICH SW-2 offers both Wah and Volume modes, along with two bypass options. The pedal is activated by pressing down on the toe end of the treadle until you feel a click.

모드 선택:

  • Use the small toggle switch located on the side of the pedal to select between WAH, VOL, or BYPASS modes.
  • When the toggle switch is in the WAH position, the pedal functions as a wah effect.
  • When the toggle switch is in the VOL position, the pedal functions as a volume control.
  • When the toggle switch is in the BYPASS position, the pedal is in true bypass mode, allowing the signal to pass through unaffected.

참여/비참여 효과:

To engage or disengage the Wah or Volume effect, press the toe end of the pedal treadle firmly until you hear or feel a click. An indicator light will illuminate when the effect is active (Wah mode) or off (Volume mode, depending on the selector level position).

Diagram showing Wah/Vol mode with buffer bypass and Wah/Bypass mode with pure pass-through
Figure 3: Illustration of the two bypass modes: Wah/Vol (buffer bypass) and Wah/Bypass (pure pass-through).

컨트롤 및 기능

Familiarize yourself with the various controls on the STRICH SW-2 pedal to achieve your desired sound.

  • WAH./VOL./BYPASS Toggle Switch: This three-position switch selects the primary function of the pedal.
    • WAH: Activates the wah effect.
    • VOL : Activates the volume control.
    • 우회로: Engages true bypass, removing the pedal from the signal chain.
  • MIN VOL Knob: (Active in Volume mode) This knob sets the minimum volume level when the pedal treadle is in the heel-down position. Adjusting this allows for dynamic volume swells from a silent cut-off to a set minimum level.
    Diagram showing adjustable initial volume with wide range (0% min vol) and narrow range (50% min vol)
    Figure 4: The MIN VOL knob allows adjustment of the minimum volume range.
  • QUALITY Knob: (Active in Wah mode) This control adjusts the resonance and intensity of the wah effect. Turning it clockwise increases the "Q" factor, making the wah sound sharper and more pronounced.
    Diagram showing Quality knob adjustment for soft, warm, and sharp wah textures
    Figure 5: The QUALITY knob fine-tunes the wah sound texture.
  • 범위 조절 노브: (Active in Wah mode) This knob selects one of six different center frequency ranges for the wah effect. Each setting provides a distinct tonal character, from deep "wa" to sharp "wu" sounds.
    Diagram showing 6 adjustable center frequencies for the wah effect
    Figure 6: The RANGE knob offers six adjustable center frequencies for the wah effect.
  • Treadle (Pedal): The main foot-operated part of the pedal.
    • Wah Mode: Moving the treadle from heel-down to toe-down sweeps the wah filter across the selected frequency range.
    • 볼륨 모드: Moving the treadle from heel-down to toe-down increases the volume from the minimum set by the MIN VOL knob to maximum.
  • Footswitch (under treadle): Engages or disengages the selected effect (Wah or Volume). Press firmly on the toe end of the treadle to activate.

유지

  • 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.
  • 저장: Store the pedal in a dry environment, away from extreme temperatures and direct sunlight. Disconnect power when not in use for extended periods.
  • 케이블 연결: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in during operation.
  • 전원 공급 장치: Always use the provided 9V 1A power adapter or a compatible, regulated 9V DC power supply with a center-negative polarity. Using an incorrect power supply can damage the unit and void the warranty.

문제 해결

문제가능한 원인해결책
페달을 밟아도 소리가 나지 않습니다.
  • 잘못된 케이블 연결.
  • 전원 공급 장치가 연결되지 않았거나 고장났습니다.
  • Pedal not engaged (footswitch not pressed).
  • Volume knob (on guitar/amp) turned down.
  • Verify all 1/4-inch cables are securely connected to INPUT/OUTPUT.
  • Ensure power adapter is connected and receiving power.
  • 효과를 적용하려면 풋스위치를 단단히 누르세요.
  • Check volume levels on your guitar and amp리퍼.
Wah effect is not noticeable or sounds incorrect.
  • Toggle switch not in WAH position.
  • QUALITY or RANGE knobs set too low or inappropriately.
  • Set the toggle switch to WAH.
  • Adjust the QUALITY and RANGE knobs to experiment with different wah characteristics.
Volume control is not working as expected.
  • Toggle switch not in VOL position.
  • MIN VOL knob setting.
  • Set the toggle switch to VOL.
  • Adjust the MIN VOL knob to set the desired minimum volume level.
원치 않는 소음이나 윙윙거리는 소리.
  • 접지 루프 문제.
  • 케이블에 결함이 있습니다.
  • 다른 전자 장치의 간섭.
  • Potential characteristic of the volume circuit at zero volume (as noted in some user feedback).
  • Ensure all equipment is properly grounded. Try different power outlets.
  • Test with different instrument cables.
  • 페달을 변압기나 기타 소음이 발생하는 전자 기기에서 멀리 떨어뜨려 놓으십시오.
  • If a slight hum/hiss is present at zero volume in volume mode, adjusting the MIN VOL knob to a slightly higher setting may mitigate this if a complete silence is not required.

명세서

특징세부 사항
모델 번호SW-2
상표스트라이크
제품 치수28.5 x 10.5 x 6.5cm
품목 무게0.75 킬로그램
오디오 출력 효과Volume, Wah
컨트롤 타입Pedal, Knobs, Toggle Switch
전원Corded Electric (9V 1A DC, center-negative)
하드웨어 인터페이스1/4인치 오디오 입력/출력
신호 형식비슷한 물건
포함된 구성 요소1 x SW-2 Wah Volume Pedal, 1 x Power Supply Adapter, 1 x STRICH Sticker
원산지중국
Image showing product dimensions of the STRICH SW-2 pedal
Figure 7: Product dimensions of the STRICH SW-2 Guitar Wah & Volume Pedal.

보증 및 지원

The STRICH SW-2 Guitar Wah & Volume Pedal comes with a 1년 보증 구매일로부터. 본 보증은 제조상의 결함에 대한 보증이며, 정상적인 사용 환경에서 제품이 의도한 대로 작동하는지 확인합니다.

For technical support, warranty claims, or any questions regarding your pedal, please contact STRICH customer service through the retailer where the product was purchased or refer to the manufacturer's contact information provided with your product packaging.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.