소개
Thank you for choosing the AEQ Solar Shed Light. This manual provides detailed instructions to ensure proper installation, operation, and maintenance of your 267 LED solar-powered pendant light. Designed for both indoor and outdoor use, this light features motion sensing, remote control, and timer functions, making it ideal for sheds, garages, gazebos, and barns.

Image: The AEQ Solar Shed Light, featuring its unique 5+1 LED panel design.
설정 및 설치
Follow these steps for a successful installation of your solar shed light. No complex wiring is required.
- 구성 요소 풀기: Carefully remove all items from the packaging. Ensure you have the light unit, solar panel, remote control, and the 16.5-foot connecting wire.
- Choose Solar Panel Location: Select an outdoor location for the solar panel that receives 6-8 hours of direct sunlight daily. This is crucial for optimal charging.
- 태양광 패널 장착: Securely attach the solar panel using appropriate mounting hardware (not included, but typically standard screws/brackets). Adjust its angle to maximize sun exposure.
- Choose Light Unit Location: Hang the light unit in your desired indoor or outdoor area, such as a shed, garage, gazebo, or barn. The light unit features a convenient hook for easy suspension.
- Connect Solar Panel to Light Unit: Connect the 16.5-foot wire from the solar panel to the light unit. Ensure the connection is firm and waterproof.
- Activate Light Unit: Locate the ON/OFF switch on the light unit and slide it to the "ON" position. The light is now ready for remote control operation.

이미지: 이상view of the AEQ Solar Shed Light components and features.

이미지: 전amples of the AEQ Solar Shed Light installed in different environments, demonstrating its versatility and IP65 waterproof rating.
Video: This video demonstrates the installation process and shows the light in various settings.
작동 지침
Your AEQ Solar Shed Light offers flexible operation modes and remote control for convenience.
원격 제어 기능:
- 켜기/끄기: Press to turn the light unit on or off.
- MODE1 (Motion Sensor Mode): In this mode, the light remains off during the day and night. It will automatically turn on for 120 seconds when motion is detected.
- MODE2 (Always On Mode): The light stays on continuously, whether it is day or night, until the battery power is exhausted.
- 밝기 조정: Use the brightness buttons (e.g., 20%, 40%, 60%, 80%, 100%) to select your desired light intensity.
- Timer Settings (Night Only): Set the light to turn off automatically after 1 hour (1H), 2 hours (2H), or 3 hours (3H) during nighttime operation.

Image: Explanation of the two 'All Day Mode' options: Motion Sensor and Always On.

Image: Night Mode operation with 1, 2, or 3-hour timer settings.

Image: Remote control for adjusting brightness and setting timers.
비디오: 이 비디오는 다음을 제공합니다.view of the solar shed light's features and operational modes.
유지
Regular maintenance ensures the longevity and optimal performance of your solar shed light.
- 태양광 패널 청소: 부드러운 천으로 태양광 패널 표면을 주기적으로 닦아주세요.amp cloth to remove dust, dirt, leaves, or snow. A clean panel maximizes sunlight absorption and charging efficiency.
- Light Unit Inspection: Inspect the light unit and its connecting wire for any signs of damage, wear, or loose connections. Ensure the waterproof connections remain sealed.
- 배터리 관리 : The integrated battery is designed for durability. To prolong its lifespan, ensure the solar panel receives adequate sunlight for consistent charging. Avoid prolonged periods of complete discharge.
문제 해결
If you encounter issues with your AEQ Solar Shed Light, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 전원 스위치가 꺼져 있습니다. 태양광 충전이 부족합니다. 연결이 느슨함. | Ensure switch is "ON". Allow 6-8 hours direct sunlight charging. 모든 케이블 연결을 확인하십시오. |
| 리모컨이 작동하지 않습니다. | 전등 스위치가 꺼져 있습니다. 리모컨 배터리 부족/완전 방전. Obstruction or out of range. | Ensure light switch is "ON". 원격 배터리를 교체하십시오. Point remote directly at light within 3-20 ft. |
| Insufficient brightness or short operating time. | Solar panel dirty/obstructed. 낮은 밝기 설정. 충전 시간이 부족합니다. | Clean solar panel; ensure full sun exposure. Adjust brightness via remote. Ensure 6-8 hours of direct sunlight charging. |
| Motion sensor not activating. | 잘못된 모드를 선택했습니다. 센서가 막혔습니다. | Ensure MODE1 (Motion Sensor Mode) is selected. 센서 주변의 장애물을 제거하십시오. |
명세서
Key technical details for the AEQ Solar Shed Light (Model AE005):
- 상표: 영어:
- 모델 번호: AE005
- 빛의 출처: 267개의 LED 비즈
- 색온도: 6500K(백색광)
- 명도: 1200루멘
- 패널 디자인: 5+1 LED panels, 120° adjustable angle
- Solar Panel Charging Time: 6-8시간 (직사광선)
- 작동 시간: 8-20 hours (depending on mode/brightness)
- 방수 등급: IP65
- 케이블 길이: 16.5 피트
- 제어 방법: 원격 제어
- 모드: 2 All-Day Available Modes (Motion Sensor, Always On)
- 타이머 옵션: 1H/2H/3H (night only)
- 밝기 레벨: 5 단계 조절 가능
- 크기(조명 단위): 15.5인치 x 15.5인치
- 재료: 플라스틱
- 포함된 구성 요소: 원격 제어
보증 정보
The AEQ Solar Shed Light (Model AE005) comes with a 1년 제조사 보증 구매일로부터 유효합니다. 본 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해서는 구매 증빙 자료를 보관해 주십시오.
고객 지원
For further assistance, technical support, or to inquire about warranty services, please contact AEQ customer support. You can typically find contact information through the retailer's platform where you purchased the product or by visiting the official AEQ web대지.