Cudy AP1200 아웃도어

Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) User Manual

모델: AP1200 야외

1. 제품 오버view

The Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) is designed to provide reliable and high-speed Wi-Fi connectivity in outdoor environments. It supports the latest 802.11ac Wave 2 technology, offering dual-band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. Key features include MU-MIMO, Beamforming, IP65 waterproof rating, 4KV lightning protection, and flexible Power over Ethernet (PoE) options.

Cudy AC1200 Gigabit Outdoor Wireless Access Point with key features listed

Figure 1: Cudy AP1200 Outdoor Wireless Access Point Overview

2. 패키지 내용

패키지에 아래 나열된 모든 품목이 포함되어 있는지 확인하십시오.

  • AP1200 Outdoor Wireless Access Point
  • 전원 어댑터
  • Detachable Antennas (2 units)
  • 전원 코드
  • 마운팅 키트
  • 이더넷 케이블
  • 설치 가이드(본 설명서)

3. 하드웨어 오버view

3.1 물리적 외관

앞쪽 view of the Cudy AP1200 Outdoor Wireless Access Point

Figure 2: Cudy AP1200 Outdoor Access Point

3.2 LED 표시등

The device features several LED indicators to show its status:

  • 전원 LED: 전원 상태를 나타냅니다.
  • 랜 LED: 이더넷 연결 상태를 나타냅니다.
  • 2.4GHz Wi-Fi LED: Indicates 2.4GHz wireless activity.
  • 5GHz Wi-Fi LED: Indicates 5GHz wireless activity.

3.3 포트 및 버튼

The device includes the following ports and buttons:

  • RJ45 Port (PoE-IN): Used for both data and power input via Power over Ethernet.
  • 재설정 버튼: 공장 기본 설정을 복원하는 데 사용됩니다.
  • 안테나 커넥터: Two RP-SMA connectors for detachable antennas.
Close-up of the RJ45 PoE-IN port on the Cudy AP1200 Outdoor

Figure 3: RJ45 Port with PoE-IN

4. 설정 및 설치

4.1 안테나 부착

Carefully screw the two detachable 5dBi antennas onto the RP-SMA connectors on the device. Ensure they are securely fastened but do not overtighten.

Cudy AP1200 Outdoor with two detachable antennas attached

Figure 4: Antennas Attached to AP1200 Outdoor

4.2 PoE(Power over Ethernet) 연결

The AP1200 Outdoor supports 802.3at/af PoE or 24~50V passive power supply. Use the included PoE adapter to power the device and connect it to your network.

  1. Connect one end of an Ethernet cable to the LAN port of your router or network switch.
  2. Connect the other end of this Ethernet cable to the 'LAN' port on the PoE adapter.
  3. Connect one end of the included Ethernet cable to the 'PoE' port on the PoE adapter.
  4. Open the protective cover on the AP1200 Outdoor and connect the other end of the Ethernet cable from the PoE adapter to the RJ45 (PoE-IN) port on the AP.
  5. Plug the PoE adapter into a power outlet. The device will power on, and the Power LED will illuminate.

4.3 장착 옵션

The AP1200 Outdoor can be mounted on a pole or a wall using the provided mounting kit. Choose a location that offers optimal Wi-Fi coverage and is protected from direct impact.

  • 극 장착: Use the straps and brackets to secure the device to a pole.
  • 벽면 장착: Use screws and anchors to attach the device to a wall.
Diagram showing both wall-mounting and pole-mounting options for the Cudy AP1200 Outdoor

Figure 5: Mounting Options (Wall and Pole)

5. 작동 모드

The Cudy AP1200 Outdoor supports multiple operating modes to suit various network requirements:

  • 액세스 포인트(AP) 모드: Connects to a wired network and transforms it into a wireless network, allowing multiple Wi-Fi devices to connect.
  • 확장 모드: 기존 무선 네트워크의 적용 범위를 확장합니다.
  • 라우터 모드 : 기본 라우터 역할을 하며 연결된 장치에 인터넷 접속을 제공합니다.
  • WISP 모드: Connects wirelessly to an Internet Service Provider (ISP) network and shares the connection with local devices.
  • 메시 라우터 모드: Creates a seamless mesh Wi-Fi network with other compatible devices.
액세스 포인트 모드 설정 방법을 보여주는 다이어그램

액세스 포인트 모드

Diagram illustrating Router Mode setup

라우터 모드

Diagram illustrating Repeater Mode setup

리피터 모드

WISP 모드 설정 방법을 보여주는 다이어그램

WISP 모드

6. 구성

To configure the AP1200 Outdoor, connect a computer to the device via Ethernet or Wi-Fi. Access the web기반 관리 인터페이스를 사용하는 web 브라우저.

  1. Ensure your computer is connected to the AP1200 Outdoor (either directly via Ethernet or to its default Wi-Fi network).
  2. 열기 web 브라우저를 열고 기본 IP 주소를 입력하세요(일반적으로 192.168.10.1 or refer to the Quick Installation Guide) in the address bar.
  3. 기본 사용자 이름과 비밀번호를 입력하세요(일반적으로). admin (둘 다 해당).
  4. Follow the on-screen wizard to set up your desired operating mode, Wi-Fi name (SSID), and password.
  5. 설정을 저장하고 메시지가 표시되면 기기를 다시 시작하십시오.

7. 유지관리

7.1 펌웨어 업데이트

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Visit the Cudy official website for the latest firmware for your AP1200 Outdoor model.

7.2 청소

As an outdoor device with an IP65 rating, the AP1200 Outdoor is protected against dust and water. However, periodic cleaning can help maintain its appearance and prevent excessive buildup. Use a soft, damp cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners.

7.3 환경 고려 사항

The device is designed to operate in a wide range of outdoor temperatures (-40°C to 65°C). Ensure proper ventilation and avoid placing it in direct sunlight for prolonged periods if possible, to maximize lifespan.

Illustrations of the Cudy AP1200 Outdoor's weatherproof features including rain-proof, extreme temperature resistance, lightning/surge protection, and dust-proof design.

Figure 6: Weather-Proof Design

8. 문제 해결

If you encounter issues with your AP1200 Outdoor, refer to the following common troubleshooting steps:

  • 전원 없음: Ensure the PoE adapter is correctly plugged into a power outlet and the Ethernet cable is securely connected to the AP's PoE-IN port. Check the power LED.
  • 인터넷 접속 불가: Verify that your main router has internet access. Check the Ethernet cable connections between the router, PoE adapter, and AP. Ensure the AP is configured in the correct operating mode.
  • 약한 Wi-Fi 신호: Adjust the antenna orientation. Relocate the AP to a more central position or higher elevation. Check for physical obstructions.
  • 접근할 수 없습니다 Web 관리 페이지: Ensure your device is connected to the AP's network. Verify the IP address entered in the browser is correct. Try clearing your browser's cache or using a different browser.
  • 공장 초기화 : If problems persist, you may need to perform a factory reset. With the device powered on, use a paperclip to press and hold the Reset button for approximately 5-10 seconds until the LEDs flash. The device will restart with factory default settings.

9. 사양

특징설명
모델명AP1200 야외
제품 치수9.45 x 3.94 x 2.11 인치
품목 무게14.6 온스
무선 표준802.11ac 웨이브 2
주파수 대역 클래스듀얼 밴드(2.4GHz 및 5GHz)
와이파이 속도 (5GHz)최대 867Mbps
와이파이 속도 (2.4GHz)최대 300Mbps
안테나2 external 5dBi detachable antennas
포트1x RJ45 (PoE-IN)
전원 공급 장치802.3at/af PoE or 24~50V Passive PoE (adapter included)
날씨 보호IP65 rated waterproof housing, 4KV lightning protection
작동 온도-40°C ~ 65°C
호환 장치개인용 컴퓨터, 보안 카메라, 스마트 TV, 스마트폰, 태블릿

10. 보증 정보

Cudy products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cudy web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

11. 기술 지원

If you require further assistance or have questions not covered in this manual, please contact Cudy Technical Support. You can find contact information, FAQs, and additional resources on the official Cudy web대지:

  • Web대지: www.cudy.com
  • 이메일: 참조 web고객 지원 이메일 주소 사이트입니다.