CREWORKS 10L Ultrasonic Cleaner User Manual

1. 서론

This manual provides essential information for the safe and effective operation of your CREWORKS 10L Ultrasonic Cleaner. This machine is designed for thorough cleaning of various items such as lab tools, glasses, jewelry, auto parts, and more, utilizing ultrasonic cavitation and heating capabilities.

Please read this manual carefully before initial use and retain it for future reference.

2. 안전 정보

부상이나 기기 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.

• 분해하지 마십시오: Unauthorized disassembly may void the warranty and pose electrical hazards.
• 항상 충분한 양의 수분을 섭취하십시오. Ensure the tank is filled to the recommended level before operation to prevent damage to the ultrasonic transducers.
• Avoid flammable liquids: Never use flammable, explosive, or corrosive liquids in the tank.
• 사용하지 않을 때는 플러그를 뽑아두세요: Disconnect the power cord from the outlet when the unit is not in use or before cleaning.
• 적절한 환기: 작동 중에는 장치 주변에 적절한 환기가 이루어지도록 하세요.
• 건조 유지: Do not immerse the main unit in water or other liquids. Avoid splashing water onto the control panel.

이미지: 앞면 view of the CREWORKS 10L Ultrasonic Cleaner, showing the control panel and a yellow warning label on the lid.

3. 구성품 및 특징

Your CREWORKS 10L Ultrasonic Cleaner includes the following main components:

• Ultrasonic Cleaner Unit (main body with tank)
• Basket (for holding items during cleaning)
• 전원 코드
• Water Pipe (drain valve attachment)

주요 특징은 다음과 같습니다.

• 10L (2.6 Gallon) Capacity: Large stainless steel tank for various items.
• 240W Ultrasonic Power: Generates 40kHz sound waves for effective cavitation.
• 300W 가열 전력: Adjustable temperature from 70 to 175°F (20-80°C) for enhanced cleaning.
• 타이머 제어: Adjustable cleaning cycles up to 30 minutes.
• 내구성 있는 구조: Stainless steel tank (304 grade) and exterior (201 grade).
• 조용한 작동: Extra-thick tank wall for noise reduction (below 60 dB).
• 안정적인 디자인: Non-skid rubber feet for secure placement.

이미지: 이상view of key features including control knobs, stainless steel construction, fuses, and dissipation holes.

이미지: 내부 view of the stainless steel tank, highlighting the 304 food-grade stainless steel construction.

4. 설정

1. 풀다: 포장에서 모든 구성품을 조심스럽게 꺼내십시오. 제품에 손상 흔적이 있는지 확인하십시오.
2. 놓기: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
3. Connect Drain Valve (if applicable): Attach the provided water pipe to the drain valve on the side of the unit if you plan to use it for draining.
4. 채우기 탱크: Fill the stainless steel tank with the appropriate cleaning solution (water, or water with a suitable ultrasonic cleaning concentrate) up to the recommended fill line. Do not overfill or underfill. Ensure the items to be cleaned are fully submerged.
5. 장바구니에 담기: 청소 바구니를 탱크에 넣으세요.
6. 전원 연결: 전원 코드를 접지된 콘센트에 꽂으세요.

5. 사용 설명서

초음파 세척기를 작동하려면 다음 단계를 따르십시오.

1. 준비할 항목: Place the items to be cleaned into the cleaning basket. Ensure items are not touching each other if possible, and are fully submerged in the cleaning solution.
2. 뚜껑 닫기: Close the lid of the ultrasonic cleaner.
3. 설정 온도(선택 사항): If heating is desired, turn the "TEMPERATURE" knob to select the desired temperature between 70°F and 175°F (20°C and 80°C). The heating indicator light will illuminate. Allow time for the solution to reach the set temperature.
4. 청소 시간 설정: Turn the "TIME" knob to select the desired cleaning duration, up to 30 minutes. The cleaning indicator light will illuminate, and the ultrasonic cleaning process will begin.
5. 모니터 프로세스: The unit will operate for the set time. You may hear a slight buzzing sound, which is normal during ultrasonic operation.
6. 완성: Once the set time has elapsed, the unit will automatically stop. The indicator lights will turn off.
7. 항목 제거: Carefully open the lid and remove the cleaning basket with the cleaned items. Rinse items thoroughly with clean water if necessary and dry them.
8. 배수 솔루션: After cleaning, it is recommended to drain the used cleaning solution. Place a suitable container under the drain valve and open the valve to empty the tank. Close the valve once empty.

Image: Illustration of how ultrasonic cavitation works to clean items by forming and bursting microscopic bubbles.

이미지: 전amples of items suitable for cleaning with the ultrasonic cleaner, such as glasses, machine parts, and tools.

6. 유지관리

적절한 유지 관리는 초음파 세척기의 수명과 최적의 성능을 보장합니다.

• 탱크를 비우고 청소하세요: After each use, especially if using cleaning solutions other than water, drain the tank completely. Rinse the tank interior with clean water and wipe it dry with a soft cloth. Do not use abrasive cleaners or scourers.
• 외부 청소: 광고로 장치의 외부를 닦습니다.amp 천. 독한 화학 물질을 사용하지 마십시오.
• 저장: 사용하지 않을 때에는 장치를 서늘하고 건조한 곳에 보관하십시오.
• 퓨즈 교체: The unit is equipped with protective fuses. If the unit fails to power on, check and replace the fuses if necessary. Refer to the specifications for fuse type.

7. 문제 해결

초음파 세척기 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

• 장치의 전원이 켜지지 않습니다.
  • 전원 코드가 작동하는 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • 전원 스위치가 "켜짐" 위치에 있는지 확인하십시오.
  • Check the fuses. Replace if blown.
• No ultrasonic action (no buzzing sound):
  • Ensure the tank is filled with sufficient liquid.
  • Check if the timer is set and the unit is powered on.
  • 문제가 지속되면 고객 지원에 문의하십시오.
• Cleaning results are unsatisfactory:
  • Ensure the cleaning solution is appropriate for the items being cleaned.
  • 청소 시간을 늘리세요.
  • Consider using heat to improve cleaning effectiveness.
  • Ensure items are not overcrowded in the basket.

8. 사양

Image: Dimensional drawing of the ultrasonic cleaner and its basket.

9. 보증 및 지원

For warranty information or technical support, please contact CREWORKS customer service. Keep your purchase receipt and model number (JX-040) handy when contacting support.

You can find contact information on the official CREWORKS web사이트나 구매처를 통해 구매하세요.