VEVOR US-007/36W UV Disinfection Lamp with Ozone Purifier User Manual

1. Introduction and Important Safety Warnings

Thank you for choosing the VEVOR US-007/36W UV Disinfection Lamp. This device utilizes advanced UV-C light and ozone generation to effectively purify air and surfaces in unoccupied spaces. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. 상자 안에 무엇이 들어있나요?

Carefully unpack all components and check for any damage. If any items are missing or damaged, please contact VEVOR customer support.

• 1 x VEVOR US-007/36W UV Disinfection Lamp
• 1 x 리모컨
• 1 x Alkaline Battery (23A 12V) for Remote Controller
• 1 x Sticker for Lampshade Top
• 1 x 사용 설명서(이 문서)

3. 제품 오버view

The VEVOR US-007/36W UV Disinfection Lamp is designed for comprehensive air and surface purification. It features a robust design with intuitive controls.

Image 3.1: Product Details. This image shows the main components of the VEVOR UV Disinfection Lamp, including the ABS flame-retardant lamp cover, the 110W long-lifespan light tube, the hand-operated switch on the base, and the wireless remote controller.

주요 구성 요소:

• UV-C Quartz Tube: High-transmission quartz tube emitting 253.7 nm UV-C light and 185 nm UV light for ozone generation.
• ABS Flame Retardant Lamp 씌우다: Provides protection for the UV-C tube.
• Base with Control Panel: Features a hand-operated switch and digital display for timer settings.
• 무선 리모콘: Allows convenient operation from a distance, offering ON/OFF and timer functions.

Image 3.2: Control Modes. This image illustrates the two control methods: the wireless remote control and the panel control located on the device base. It also highlights the three timer levels: 0.5 hours, 1 hour, and 2 hours.

4. 설정

1. 장치 포장 풀기: Carefully remove the UV Disinfection Lamp and all accessories from its packaging. Retain packaging for future storage or transport.
2. 놓기: l을 놓으세요amp on a stable, flat surface in the center of the room you wish to disinfect. Ensure there are no obstructions blocking the UV light path. The lamp is suitable for rooms up to 37 m² (approximately 400 sq ft).
3. 전원 연결: 전원 코드를 일반 전기 콘센트(220-240V, 50Hz)에 꽂으십시오.
4. 원격 제어 배터리 설치: Open the battery compartment on the back of the remote control. Insert the provided 23A 12V alkaline battery, ensuring correct polarity (+/-). Close the compartment.
5. 방을 준비하세요: Before operation, ensure all people, pets, and plants are removed from the room. Close all doors and windows to contain the UV-C light and ozone.

5. 사용 설명서

난amp can be operated using either the control panel on the device base or the wireless remote control.

제어판 사용:

1. l을 확인하세요amp is plugged in and the room is empty.
2. Press the power button on the base. The lamp will typically have a delay before turning on to allow you to leave the room safely.
3. Use the timer buttons on the base to select the desired disinfection duration (0.5h, 1h, or 2h).
4. Once the timer is set, the lamp will begin operation after a short delay. Immediately exit the room.

리모컨 사용하기:

1. l을 확인하세요amp is plugged in and the room is empty.
2. Point the remote control towards the lamp.
3. Press the 'ON' button to power on the lamp.
4. Select the desired timer setting (0.5H, 1H, or 2H) using the corresponding buttons on the remote.
5. 난amp will activate after a short delay. Immediately exit the room.

작업 후:

1. Once the selected disinfection cycle is complete, the lamp 자동으로 꺼집니다.
2. 하지 마세요 re-enter the room immediately. Open windows and doors (from outside the room if possible) to allow for thorough ventilation.
3. Ventilate the room for at least 30-60 minutes to ensure all ozone has dissipated before re-entry.

Image 5.1: Ozone and UV-C Action. This image visually represents the lamp's dual action, showing UV-C light and ozone (O3) being emitted to purify the air and surfaces within a room, covering up to 37 m².

6. 유지관리

Regular maintenance ensures the longevity and effectiveness of your UV Disinfection Lamp.

L 청소amp:

• 청소하기 전에는 항상 기기의 플러그를 전원 콘센트에서 뽑아두세요.
• Use a soft, dry cloth to gently wipe the exterior of the lamp and the quartz tube.
• Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the device or reduce the effectiveness of the UV-C tube.
• l을 확인하세요amp 다시 연결하기 전에 완전히 건조된 상태입니다.

원격 제어 배터리 교체 :

• If the remote control becomes unresponsive, replace the 23A 12V alkaline battery.
• Open the battery compartment, remove the old battery, and insert a new one with correct polarity.
• 오래된 배터리는 해당 지역 규정에 따라 폐기하세요.

7. 문제 해결

If you encounter issues with your VEVOR UV Disinfection Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.

8. 사양

Detailed technical specifications for the VEVOR US-007/36W UV Disinfection Lamp.

Image 8.1: Dimensions and Specifications. This image provides a visual representation of the lamp's dimensions and lists key specifications such as model number, power, timer settings, material, wavelength, color, controller size, product size, product weight, and package contents.

9. 보증 및 지원

VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official VEVOR web자세한 보증 약관은 해당 사이트에서 확인하세요.

고객 지원:

If you have any questions, require technical assistance, or need to report an issue, please contact VEVOR customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (US-007/36W) and purchase details ready.

For more information and to register your product, visit: www.vevor.com