아르곤 오디오 TT MK2 턴테이블 사용 설명서

소개

구매해주셔서 감사합니다asing the Argon Audio TT MK2 Turntable. This manual provides essential information for the safe and optimal operation, setup, and maintenance of your new turntable. Please read this manual thoroughly before using the product and retain it for future reference.

The Argon Audio TT MK2 is designed to deliver high-fidelity audio playback from your vinyl records, featuring a built-in phono pre-amplifier, an Audio Technica AT3600 cartridge, and dual-speed control for 33 and 45 RPM records.

중요 안전 지침

감전, 화재 또는 장치 손상의 위험을 줄이려면 다음 안전 예방 조치를 준수하세요.

• 이 제품을 비나 습기에 노출시키지 마십시오.
• 꽃병 등 액체가 담긴 물건을 제품 위에 올려놓지 마십시오.
• 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
• 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
• 전원 코드가 밟히거나 조이지 않도록 보호하십시오. 특히 플러그, 콘센트 및 기기에서 나오는 지점에서 전원 코드가 밟히거나 조이지 않도록주의하십시오.
• 제조사가 지정한 부속품/액세서리만 사용하세요.
• 번개 폭풍 시 또는 장기간 사용하지 않을 때는 기기의 플러그를 뽑아두세요.
• 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.

상자 안에 무엇이 들어있나요?

Carefully unpack all components and ensure all items are present before discarding packaging materials:

• Argon Audio TT MK2 Turntable Unit
• Audio Technica AT3600 Cartridge (pre-mounted)
• Dust Lid
• RCA 케이블
• 전원 어댑터
• 균형추
• 안티 스케이트 무게
• Platter and Drive Belt
• 펠트 매트

Image: The Argon Audio TT MK2 Turntable with its clear dust cover in place, showcasing its sleek black finish.

설치 가이드

1. 배치

Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure there is enough space around the unit for ventilation and operation.

2. 플래터 및 벨트 설치

1. Carefully place the metal platter onto the spindle.
2. Locate the drive belt. Gently stretch the belt around the inner rim of the platter and hook it onto the motor pulley. Ensure the belt is not twisted.
3. 플래터 위에 펠트 매트를 놓습니다.

Image: The Argon Audio TT MK2 Turntable with its dust cover removed, showing the platter and tonearm assembly.

3. 카트리지 및 톤암 설치

The Audio Technica AT3600 cartridge comes pre-mounted on the tonearm. Follow these steps to balance the tonearm and set the tracking force:

1. 카트리지에서 스타일러스 보호 덮개를 제거하세요.
2. 톤암을 받침대에서 천천히 풀어주세요.
3. Rotate the counterweight at the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
4. Once balanced, hold the counterweight steady and rotate the numbered ring on the front of the counterweight to "0".
5. Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is set. For the AT3600 cartridge, the recommended tracking force is typically 3.5 grams.

이미지: 클로즈업 view of the tonearm's counterweight and anti-skate mechanism, showing the numerical scale for adjustment.

4. 안티 스케이트 조정

Attach the anti-skate weight to the small loop on the tonearm and hang it over the second groove of the anti-skate support rod. This helps prevent the stylus from skipping inwards.

5. 오디오 시스템 연결

The TT MK2 features a built-in phono pre-amplifier, allowing direct connection to powered speakers or an amplifier's line-level input. If your amplifier has a dedicated "Phono" input, you can bypass the internal pre-amp.

1. Connect the supplied RCA cable from the "RCA OUT" jacks on the rear of the turntable to the corresponding input on your amplifier or powered speakers (e.g., "AUX", "LINE IN").
2. Locate the "RIAA" switch on the rear of the turntable.
   • Set the switch to "ON" if connecting to a line-level input (e.g., AUX, CD) on your amplifier or directly to powered speakers. This activates the internal phono pre-amp리퍼.
   • Set the switch to "OFF" if connecting to a dedicated "Phono" input on your amplifier. This bypasses the internal phono pre-amplifier, as your amplifier will provide the necessary RIAA equalization.

Image: The rear panel of the Argon Audio TT MK2 Turntable, showing the RCA output jacks, the RIAA (Phono/Line) switch, and the DC 12V power input.

6. 전원 연결

Connect the supplied power adapter to the "DC IN 12V" port on the rear of the turntable, then plug the adapter into a wall outlet.

작동 지침

1. 전원 켜기 / 끄기

Use the power switch located on the rear panel to turn the turntable ON or OFF.

2. 재생 속도 선택

The TT MK2 supports two playback speeds: 33 1/3 RPM for LPs and 45 RPM for singles. Use the speed selection knob on the top right of the turntable to switch between "33" and "45".

Image: A close-up of the Audio Technica AT3600 cartridge mounted on the tonearm, alongside the "STOP" and "START" buttons and the 33/45 RPM speed selection knob.

3. 레코드 재생

1. 턴테이블 플래터 중앙에 레코드를 올려놓으세요.
2. Select the correct speed (33 or 45 RPM) using the speed knob.
3. Press the "START" button. The platter will begin to rotate.
4. 큐잉 레버를 사용하여 톤암을 부드럽게 들어 올리십시오.
5. 톤암을 레코드의 원하는 시작 홈 위에 놓으십시오.
6. Slowly lower the cueing lever to gently drop the stylus onto the record.

4. 재생 중지

1. At the end of a record, the tonearm will not automatically return. Gently lift the tonearm using the cueing lever.
2. Return the tonearm to its rest and secure it with the tonearm clip.
3. Press the "STOP" button to halt platter rotation.
4. Carefully remove the record.

유지

1. 스타일러스 청소

The stylus (needle) should be cleaned regularly to ensure optimal sound quality and prevent damage to your records. Use a soft brush designed for stylus cleaning, brushing gently from back to front (away from the cantilever).

2. 기록 정리

Always handle records by their edges. Use a carbon fiber brush or a dedicated record cleaning solution and cloth to remove dust and debris before each play.

3. 턴테이블 청소

Wipe the turntable chassis and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp 젖은 천으로 닦은 후 마른 천으로 다시 닦아주세요. 독한 화학 약품이나 연마성 세척제 사용은 피해주세요.

4. 먼지 덮개 관리

The dust cover protects your turntable from dust. When not in use, keep the dust cover closed. Clean it gently with a soft, damp cloth to avoid scratching the acrylic surface.

문제 해결

If you experience issues with your Argon Audio TT MK2 Turntable, please consult the following table before contacting support:

명세서

보증 및 지원

Argon Audio products are designed and manufactured to the highest quality standards. This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Argon Audio web자세한 보증 약관은 해당 사이트에서 확인하세요.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact your authorized Argon Audio dealer or Argon Audio customer service directly. Contact information can typically be found on the Argon Audio web대지.