Jakeko JK07B1 Magnetic Portable Monitor Desk Clamp 사용자 설명서

소개

This manual provides essential information for the safe and effective use of your Jakeko JK07B1 Magnetic Portable Monitor Desk Clamp. Designed for versatility and stability, this mount allows you to position your portable monitor, tablet, or phone for optimal viewing. Please read these instructions carefully before installation and operation to ensure proper setup and longevity of your device.

안전 정보

• CL을 확인amp is securely fastened to a stable, flat surface (e.g., desks, nightstands, coffee tables) before attaching any device. Not suitable for headboards or unstable surfaces.
• Do not exceed the maximum load-bearing capacity of 4.4 lbs (2 kg). Overloading may cause instability and damage.
• When removing a portable monitor or tablet, lift from the magnetic bottom side first to prevent accidental detachment or sudden drops.
• Keep small parts, such as screws and cable clips, away from children to prevent choking hazards.
• 모든 연결부와 조정 지점을 정기적으로 점검하여 단단하고 안전하게 유지되는지 확인하십시오.

패키지 내용

설치를 진행하기 전에 모든 구성 요소가 있고 손상되지 않았는지 확인하세요.

• Strong Magnetic Portable Monitor Mount (1)
• 데스크 Clamp 베이스 (1)
• Magnetic Plate (1)
• VESA Plate (1)
• Magnetic Copper Sheets (2)
• 케이블 클립 (4)
• 알렌 키 (1)
• Mounting Screws (various sizes for VESA)

Image: All components of the Jakeko JK07B1 Magnetic Portable Monitor Desk Clamp, including the main arm, desk clamp, magnetic plate, VESA plate, magnetic sheets, cable clips, and tools.

설치 지침

Follow these steps for proper assembly and installation of your monitor desk clamp.

1. Attach the Desk Clamp 표면으로

1. Choose a stable, flat surface for installation.
2. 책상 손잡이의 나사를 풀어주세요.amp until it opens wide enough to fit over the edge of your desk or table.
3. cl 위치amp on the edge and tighten the knob firmly until it is secure. Ensure the clamp 안정적이며 흔들리지 않습니다.

Image: Step-by-step visual guide for securing the desk clamp to a table surface.

2. 모니터 암을 조립합니다.

1. Insert the main arm into the desk clamp 베이스.
2. Tighten the locking ring on the desk clamp base to secure the arm.
3. Attach the magnetic plate or VESA plate to the end of the arm, depending on your device.

Image: The monitor arm demonstrating its precision adjustment capabilities, including 360° swivel and 180° angle adjustment.

3. Device Attachment (Magnetic or VESA)

The mount supports two primary methods for attaching your device:

• 자석 부착: For devices without VESA, attach one of the provided magnetic copper sheets to the back of your device. Ensure the surface is clean and dry for optimal adhesion. Then, simply place your device onto the magnetic plate on the arm.
• VESA Attachment: For portable monitors with 75x75mm VESA mounting holes, use the VESA plate and included screws to secure your monitor to the arm.

Image: Visual comparison of direct VESA installation and the self-adhesive magnetic mount for devices.

작동 지침

The Jakeko JK07B1 mount offers extensive flexibility for optimal viewing and workspace organization.

Adjusting Position and Angle

• 높이 조정: Use the side-mounted wrenches on the arm joints to loosen, adjust the height, and then re-tighten to secure the desired position. No additional tools are required.
• 각도 조정: The arm features multiple joints that allow for 180° angle adjustments. Loosen the corresponding wrench, set the angle, and tighten.
• 회전: The base of the clamp allows for 360° rotation, enabling you to swivel the entire arm. The magnetic plate also offers 360° rotation for your device.
• 도달하다: The arm provides a 24-inch reach, allowing you to position your device precisely where needed.

Image: The monitor arm in use across different environments, highlighting its adaptability for working, cooking, and leisure.

케이블 관리

Utilize the included cable clips to route and secure your device's cables along the arm, maintaining a tidy and organized workspace.

유지

• 청소: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• 관절: Periodically check the tightness of all adjustment screws and levers. Tighten if necessary to maintain stability.
• Magnetic Sheets: If using magnetic attachment, ensure the magnetic sheets on your device are clean and free from debris to maintain strong adhesion.

문제 해결

• Mount is wobbly: 책상이 깨끗한지 확인하세요amp is fully tightened to the surface. Check all arm joints and tighten the side-mounted wrenches.
• Device is slipping from magnetic mount: Verify that the magnetic copper sheet is securely attached to your device and that the magnetic plate on the arm is clean. Ensure the device weight does not exceed 4.4 lbs.
• Difficulty adjusting arm: Loosen the side-mounted wrenches slightly before attempting to adjust the arm's position or angle. Re-tighten once the desired position is achieved.

명세서

Image: The monitor arm demonstrating its robust load-bearing performance, supporting up to 4.4 lbs.

보증 및 지원

For warranty information, technical support, or any inquiries regarding your Jakeko JK07B1 Magnetic Portable Monitor Desk Clamp, please refer to the official Jakeko web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.