1. 서론
The Ecosense TROV L50 Interior LED Cove Light is a high-performance linear LED fixture designed for interior cove lighting applications. This manual provides essential information for the safe and proper installation, operation, and maintenance of your TROV L50 fixture. Please read all instructions carefully before installation and retain this manual for future reference.
그림 1.1: 앞쪽 view of the Ecosense TROV L50 LED Cove Light, showcasing the illuminated LED array.
2. 안전 정보
경고: Risk of electric shock. Disconnect power before installation or servicing. All electrical work must be performed by a qualified electrician and conform to all applicable national and local electrical codes.
- 습기가 많은 장소에는 해당 용도로 특별히 제작된 제품이 아닌 이상 설치하지 마십시오.
- 공급 볼륨을 확인tage는 조명기구의 정격 볼륨과 일치합니다.tage(120-277V).
- Do not modify the fixture or use non-approved components.
- 조명이 켜져 있을 때는 빛이 눈을 직접 향하지 않도록 하십시오.
- 손상을 방지하기 위해 조명 기구를 조심스럽게 다루십시오.
3. 패키지 내용
Verify that all components are present and undamaged upon opening the package. If any items are missing or damaged, contact your supplier immediately.
- Ecosense TROV L50 Interior LED Cove Light Fixture (1 unit)
- 설치 가이드(본 설명서)
- Mounting hardware (may vary based on specific kit)
메모: Jumpers and leader cables are not included and must be purchased separately.
4. 설정 및 설치
Installation should be performed by a qualified professional in accordance with the National Electrical Code (NEC) and all local building and electrical codes.
4.1 사전 설치 단계
- 전원 분리: Ensure power to the installation area is completely turned off at the circuit breaker.
- 고정물 검사: Carefully remove the fixture from its packaging and inspect for any physical damage.
- 계획 레이아웃: Determine the exact mounting location and wiring path for optimal light distribution and accessibility.
4.2 고정물 장착
- Securely attach the mounting clips (if supplied) or brackets to the desired surface using appropriate fasteners. Ensure the mounting surface can support the weight of the fixture.
- Carefully snap or slide the TROV L50 fixture into the mounted clips/brackets. Ensure it is firmly seated.
4.3 전기 연결
The TROV L50 operates on 120-277V. Wiring must be done by a qualified electrician.
- Connect the fixture's input cable to the main power supply. Follow standard wiring practices for line, neutral, and ground connections.
- If connecting multiple fixtures, use appropriate jumper cables (not included) to link them. Ensure total wattage does not exceed circuit capacity.
- For dimming functionality, connect the dimming control wires to a compatible ELV (Electronic Low Voltage) dimmer. The fixture supports 0.07%-100% dimming with Reverse Phase/Trailing Edge dimmers.
- 모든 연결 부분이 안전하고 절연되어 있는지 확인하세요.
그림 4.1: 옆 view of the Ecosense TROV L50 LED Cove Light, illustrating the power input and output connectors for linking multiple units.
4.4 설치 후
- 모든 연결이 완료되고 안전하게 고정되면 회로에 전원을 다시 공급하십시오.
- Test the fixture for proper operation, including dimming if applicable.
5. 사용 설명서
The Ecosense TROV L50 LED Cove Light is designed for straightforward operation once installed.
5.1 전원 켜기/끄기
Turn the fixture on or off using the wall switch or circuit breaker connected to the fixture's power supply.
5.2 디밍 기능
If connected to a compatible ELV (Electronic Low Voltage) dimmer, adjust the light output by manipulating the dimmer control. The TROV L50 supports smooth dimming from 0.07% to 100% with Reverse Phase/Trailing Edge dimmers.
6. 유지관리
The TROV L50 LED Cove Light requires minimal maintenance. Regular cleaning and inspection will help ensure optimal performance and longevity.
6.1 청소
- 전원 분리: 청소하기 전에는 항상 조명기구의 전원을 끄세요.
- 외부 청소: 부드럽고 건조하거나 약간 damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or cleaners containing ammonia, as these can damage the finish or optical components.
6.2 검사
- Periodically inspect the fixture for any signs of physical damage, loose connections, or discoloration.
- 장착 하드웨어가 안전하게 고정되어 있는지 확인하세요.
- If any issues are observed, disconnect power and consult a qualified electrician or contact Ecosense support.
7. 문제 해결
Before attempting any troubleshooting, ensure power is disconnected. If the problem persists after following these steps, contact Ecosense customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 고정 장치가 켜지지 않습니다. | No power supply; Loose wiring; Faulty switch/breaker; Damaged fixture. | Check power supply at the source; Verify all wiring connections are secure; Test switch/breaker; If fixture is damaged, replace it. |
| 광 출력이 일정하지 않거나 깜박입니다. | Incompatible dimmer; Loose wiring; Power fluctuations. | Ensure dimmer is ELV Reverse Phase/Trailing Edge compatible; Check wiring connections; Consult an electrician to check power stability. |
| 밝기 조절 기능이 작동하지 않습니다. | Incompatible dimmer; Incorrect dimmer wiring. | Verify dimmer compatibility with ELV Reverse Phase/Trailing Edge; Check dimmer wiring according to manufacturer instructions. |
8. 사양
The following specifications apply to the Ecosense TROV L50 Interior LED Cove Light (Model L50-I-12-10-27-90-MULT-9X9).
그림 8.1: 옆 view of the Ecosense TROV L50 LED Cove Light, displaying the product label with model and electrical specifications.
| 특징 | 사양 |
|---|---|
| 모델 번호 | L50-I-12-10-27-90-MULT-9X9 |
| 상표 | Ecosense |
| 라이트 타입 | Interior LED Cove Light |
| 색온도 | 2700K |
| 왓tage | 10 와트 |
| 권tage | 120-277 볼트 |
| 디밍 | ELV Tyle 0.07%-100%, Reverse Phase, Trailing Edge Dimming |
| 빔 각도 | Grazing 9x9 |
| 길이 | 12인치 |
| 제품 치수 | 1.63 x 12 x 2 인치 |
| 품목 무게 | 1.4 파운드 |
| 전원 | 코드식 전기 |
| 마무리 유형 | 회색 |
| 한국어: | 703158655213 |
9. 보증 및 지원
Ecosense products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official Ecosense web대지.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Ecosense customer service through their official channels. When contacting support, please have your product model number (L50-I-12-10-27-90-MULT-9X9) and purchase information readily available.