mGYDY Bafang 810S LCD eBike Display User Manual

1. 서론

This manual provides essential information for the installation, operation, and maintenance of your mGYDY Bafang 810S LCD eBike Display. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. 안전 정보

• 라이딩하기 전에 디스플레이가 안전하게 장착되었는지 항상 확인하세요.
• 디스플레이를 분해하거나 개조하지 마십시오. 이는 보증을 무효화하고 손상을 초래할 수 있습니다.
• Keep the display away from extreme temperatures and direct sunlight for prolonged periods.
• Ensure all connections are dry and properly sealed before use, especially in wet conditions.
• 주행 중에는 주변 상황에 주의를 기울이세요. 디스플레이에 지나치게 집중하여 주의가 산만해지지 않도록 하세요.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x Bafang 810S LCD Display
• 1 x Display Holder
• Gaskets for installation

4. 제품 오버view

The mGYDY Bafang 810S LCD eBike Display is designed to provide essential riding data and control for your Bafang mid-drive motor system. It features a color VA LCD screen for clear visibility in various lighting conditions.

영상: 위에view of the Bafang 810S display showing various instrument features such as headlamps, speed loop, battery display, speed display, assist gear, fault prompt, walking mode, brake prompt, mileage mode, and mileage display.

주요 특징:

• Color VA LCD: 넓은 viewing angle, no flicker, high brightness for better visual effect under sunlight.
• Independent Button: Easy to operate interface.
• 포괄적인 데이터 표시: Speed (Real-time, MAX, AVG), Mileage (Odometer, Trip distance, Riding Time), Battery indicator (5-level, Voltag전자 퍼센트tag이자형).
• 조정 가능한 밝기: Day and Night Mode with 5-level brightness adjustment (1: darkest; 5: brightest).
• Assistant Level Control: 3, 5, or 9 adjustable assist levels.
• 걷기 모드 : Provides assistance when walking alongside your e-bike.
• 오류 코드 표시: 시스템 오류를 나타냅니다.
• 방수 등급: IP65, resistant to rain and splashing water.

5. 사양

영상: Detailed product parameters including dimensions, power supply, waterproof grade, and communication protocol.

6. 설정 및 설치

호환성 검사 :

The 810S display is designed for Bafang mid-drive motors (BBS01, BBS02, BBSHD) that use the UART 통신 프로토콜 그리고 5-pin female plug. It is not compatible with CAN protocol motors or male plugs.

영상: Visual guide for checking compatibility with UART protocol 5-pin female connectors and Bafang BBS series or hub motors. Incompatible with CAN protocol motors.

설치 단계:

1. 디스플레이 장착: Install the 810S display holder on the left side of your e-bike's handlebar. The holder is designed for handlebars with a diameter of φ22.2mm (0.87in). Secure it firmly using the provided gaskets and screws.
2. 케이블 연결: Carefully connect the 5-pin female plug of the display to the corresponding 5-pin male plug on your e-bike's wiring harness. Ensure the connection is secure and fully seated.
3. 케이블 관리 : Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with moving parts.
4. 초기 전원 켜기: After installation, power on your e-bike to verify the display functions correctly.

7. 사용 설명서

The 810S display features an intuitive interface with an independent button for navigation and settings.

디스플레이 기능 :

• 속도 표시기: Shows real-time speed, maximum speed (MAX), and average speed (AVG).
• Mileage Indicator: Displays Odometer (total distance), Trip distance, and Riding Time.
• 배터리 표시기: Provides a 5-level power indicator and voltag전자 퍼센트tage for accurate battery status.
• Assistant Level: Adjust pedal assist levels from 0-9 (or 3/5/9 depending on configuration).
• 헤드라이트 제어: Activate or deactivate your e-bike's headlight (if connected).
• 걷기 모드 : Engage for low-speed assistance when pushing the bike.
• 오류 코드: 시스템 오류가 감지되면 오류 코드를 표시합니다.

영상: The intelligent instrument panel displaying electricity, speed, current gear, battery level prompt, speed display, PAS levels, walking mode, and mileage time.

설정 조정:

• 밝기 설정 : Toggle between Day and Night modes. Adjust brightness through 5 levels (1 being darkest, 5 brightest) to suit ambient light conditions.
• Metric / Imperial: Set units according to your preference (Km/h or Mph, Km or Miles).
• 전원 켜기 비밀번호: Configure a password for added security (refer to your e-bike controller manual for specific instructions if applicable).

영상: Illustration of the display's brightness adjustment feature, showing optimal visibility in both day and night conditions.

8. 유지관리

Proper maintenance ensures the longevity and optimal performance of your 810S display.

• 청소: 부드러운 d를 사용하세요amp 디스플레이 화면을 닦을 때는 천을 사용하십시오. 화면이나 기타 부품을 손상시킬 수 있는 연마성 세척제나 용제는 사용하지 마십시오.asing.
• 방수 기능: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. While it can withstand rain and splashes, avoid submerging it in water or exposing it to high-pressure washing.
• 저장: 장기간 사용하지 않을 경우, 전자 자전거와 디스플레이를 직사광선과 극한의 온도를 피해 건조하고 서늘한 곳에 보관하세요.
• 연결 확인: Periodically check the cable connection for any signs of wear or corrosion. Ensure it remains securely plugged in.

영상: The Bafang 810S display demonstrating its IP65 waterproof capability, showing it can resist rain and water splashing.

9. 문제 해결

If you encounter issues with your 810S display, refer to the following common troubleshooting tips:

• 디스플레이가 켜지지 않음:
  • Check if the e-bike battery is charged and turned on.
  • Verify that the 5-pin cable connection between the display and the controller is secure and undamaged.
• No Speed/Mileage Data:
  • Ensure the speed sensor on your e-bike is properly installed and aligned.
  • Check for any loose connections to the speed sensor.
• 표시된 오류 코드:
  • Note down the error code. Refer to your Bafang motor or controller manual for specific error code meanings and solutions.
  • Often, turning the e-bike off and on again can clear temporary errors.
• 부정확한 판독:
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) matches your e-bike's wheel size.

If problems persist, contact the seller or a qualified e-bike technician for assistance.

10. 보증 및 지원

보증 정보 및 고객 지원은 구매 시 제공된 문서를 참조하거나 판매점에 문의하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.