1. 서론
This manual provides instructions for the installation, operation, and maintenance of the JONSBO ZA-120W PC Case Fan. The ZA-120W is a 120mm computer case fan featuring Addressable RGB (ARGB) lighting with a 4-sided infinity mirror effect, a 28mm thick frame, and PWM (Pulse Width Modulation) control for silent and efficient cooling. It is designed to enhance both the thermal performance and aesthetic appeal of your computer system.
이미지 1.1: 정면 각도 view of the JONSBO ZA-120W PC Case Fan, showcasing its white frame and vibrant ARGB infinity mirror lighting.
2. 안전 정보
- Ensure your computer system is powered off and disconnected from the main power supply before installation or maintenance.
- 선풍기와 그 구성품을 조심스럽게 다루어 손상을 방지하십시오.
- 선풍기나 배선을 개조하지 마십시오. 보증이 무효화될 수 있으며 안전상의 위험을 초래할 수 있습니다.
- 선풍기를 액체나 과도한 습기로부터 멀리 두십시오.
- 선풍기 주변의 환기가 잘 되도록 하여 과열을 방지하십시오.
- This product is intended for use within a computer chassis. Do not use it for purposes other than its intended design.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- JONSBO ZA-120W PC Case Fan (1 unit)
- 장착 나사 (4개)
- 사용 설명서 (본 문서)
4. 사양
| 특징 | 설명 |
|---|---|
| 모델 번호 | ZA120 W |
| 치수 | 120mm x 120mm x 28mm(약 5.8 x 5 x 1.18인치) |
| Rotational Speed (Regular Fan Blade) | 700-2400 RPM |
| Air Volume CFM (Regular Fan Blade) | 21.46-62.40 씨프엠 |
| Noise Level (Regular Fan Blade) | 21.3~37.3dB(A) |
| 전원 커넥터 유형 | 4-Pin PWM (Fan), 3-Pin ARGB (Lighting) |
| 권tage | 12볼트(DC) |
| 왓tage | 120 와트 (Note: This wattage seems unusually high for a single fan and might refer to a system component or be a typo in the source data. Please refer to product packaging for precise power consumption.) |
| 냉각 방식 | 강제 공기 |
| 특별 기능 | 4-Sides Infinity Mirror, Aluminum CD Pattern Nameplate, Simplified Wiring |
5. 설정 및 설치
Follow these steps to install your JONSBO ZA-120W PC Case Fan:
5.1 물리적 설치
- PC를 준비하세요: Power off your computer and unplug it from the wall outlet. Open your computer case to access the fan mounting locations.
- 장착 위치 식별: Determine where you want to install the fan (e.g., front, rear, top, bottom of the case, or on a radiator). Ensure the fan's airflow direction (indicated by arrows on the fan frame) matches your desired cooling configuration.
- 팬 장착: Position the fan against the mounting holes. Use the provided mounting screws to secure the fan to the case or radiator. Tighten screws evenly but do not overtighten.
이미지 5.1: 후면 view of the JONSBO ZA-120W fan, illustrating the fan blades and the four screw holes for mounting.
5.2 배선 연결
The JONSBO ZA-120W fan features simplified wiring with integrated male and female heads for daisy-chaining multiple fans (if applicable to your model) and connecting to the motherboard.
- PWM 케이블을 연결하세요: Locate a 4-pin fan header on your motherboard (often labeled "CPU_FAN", "SYS_FAN", or "CHA_FAN"). Connect the fan's 4-pin PWM cable to this header. This allows your motherboard to control the fan speed.
- ARGB 케이블을 연결하세요: Locate a 3-pin 5V Addressable RGB header on your motherboard (often labeled "ARGB", "D_LED", or "VDG"). Connect the fan's 3-pin ARGB cable to this header. Ensure the connector's orientation matches the header to avoid damage. Do not connect to a 4-pin 12V RGB header, as this will damage the ARGB lighting.
Image 5.2: Illustration of the simplified wiring, demonstrating how the fan connects to the motherboard with a single line for both power and ARGB control.
Image 5.3: Visual representation of connecting the 3-pin 5V ARGB cable to a compatible motherboard header for synchronized lighting effects.
After all connections are made, carefully close your computer case and reconnect the power supply.
6. 사용 설명서
6.1 팬 속도 제어(PWM)
The JONSBO ZA-120W fan utilizes PWM technology, allowing your motherboard to dynamically adjust the fan speed based on system temperature. This ensures optimal cooling performance while minimizing noise levels when full speed is not required.
- Access your motherboard's BIOS/UEFI settings or use compatible motherboard software (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV, ASRock A-Tuning) to configure fan curves.
- You can set custom fan profiles to balance between cooling performance and acoustic levels according to your preferences.
6.2 ARGB 조명 제어
The Addressable RGB lighting of the ZA-120W fan can be controlled and synchronized with other ARGB components in your system via your motherboard's ARGB software. This allows for a wide range of customizable lighting effects and colors.
- Install the appropriate ARGB control software provided by your motherboard manufacturer (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
- Within the software, select the connected ARGB device (your JONSBO fan) and choose from various lighting modes, colors, and effects.
- Ensure your motherboard's ARGB header is enabled in the BIOS/UEFI if necessary.
7. 유지관리
정기적인 유지 관리는 선풍기의 최적 성능과 수명 연장에 도움이 됩니다.
- 먼지 제거: Periodically (e.g., every 3-6 months), power off your computer and disconnect it from power. Use compressed air or a soft brush to gently remove dust accumulation from the fan blades and frame. Hold the fan blades to prevent them from spinning rapidly during cleaning, which could damage the bearings.
- 점검: 케이블에 마모나 손상 흔적이 있는지 확인하십시오. 모든 연결부가 단단히 고정되어 있는지 확인하십시오.
- Do not use liquid cleaners or abrasive materials on the fan.
8. 문제 해결
If you encounter issues with your JONSBO ZA-120W fan, refer to the following common problems and solutions:
- 팬이 회전하지 않음:
- 4핀 PWM 케이블이 마더보드의 팬 헤더에 제대로 연결되어 있는지 확인하십시오.
- Check BIOS/UEFI settings to ensure the fan header is enabled and configured correctly (e.g., not set to "disabled" or "manual 0 RPM").
- Test the fan on a different fan header or with a fan controller if available.
- ARGB 조명이 작동하지 않습니다:
- Verify the 3-pin ARGB cable is correctly connected to a 5V ARGB header on the motherboard. Ensure the orientation is correct.
- Confirm that you are using the correct motherboard ARGB software and that it recognizes the fan.
- 결정적으로: Ensure it is connected to a 3-pin 5V ARGB header, not a 4-pin 12V RGB header. Connecting to a 12V header will damage the ARGB LEDs.
- ARGB 케이블이나 커넥터에 물리적 손상이 있는지 확인하십시오.
- 팬 소리가 너무 크다:
- Adjust the fan curve settings in your motherboard's BIOS/UEFI or software to reduce fan speed at lower temperatures.
- 팬이 단단히 장착되었고 케이스에 진동이 발생하지 않는지 확인하세요.
- Clean any dust accumulation on the fan blades.
9. 보증 정보
JONSBO products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
For detailed warranty information, please refer to the warranty card included with your product or visit the official JONSBO web대지.
10. 지원
If you require further assistance or have questions not covered in this manual, please contact JONSBO customer support or your retailer.
- JONSBO Official Web대지: www.jonsbo.com (for product information and support resources)
- 소매업체 지원: Contact the store or online vendor where you purchased the product.