AUTOPHIX 7150P+ OBD2 Scanner Instruction Manual

1. 서론

The AUTOPHIX 7150P+ is a professional OBD2 diagnostic scanner designed for Ford, Lincoln, and Mercury vehicles manufactured from 1996 onwards. This tool provides comprehensive system diagnostics and a wide range of maintenance reset functions. It also serves as a universal OBD2 code reader for all 12V vehicles equipped with a 16-pin port, enabling users to read and clear diagnostic trouble codes, view live data, and perform smog test readiness checks.

2. 상자 안에 무엇이 들어있나요?

• AUTOPHIX 7150P+ OBD2 Scanner
• USB 케이블
• 사용자 설명서

3. 제품 특징

3.1 Broad Vehicle Compatibility

The AUTOPHIX 7150P+ scanner is compatible with Ford, Lincoln, and Mercury vehicles from 1996 and newer. This includes models such as F150, F250, Edge, Escape, Expedition, Explorer, Ranger, Bronco, Fusion, Focus, Fiesta, MKC, and MKZ. It performs a full, in-depth scan of every system in these vehicles to identify and diagnose issues.

3.2 Advanced Maintenance Functions

This tool offers various service features for vehicle maintenance. These include:

• 배터리 관리 시스템(BMS) 재설정
• Electronic Parking Brake (EPB) Maintenance Mode
• ABS(잠금 방지 제동 시스템) 공기 빼기
• 디젤 미립자 필터 (DPF) 재생
• 전송 재학습
• 조향각 센서(SAS) 보정
• 오일 리셋
• 타이어 공기압 모니터링 시스템(TPMS) 재설정
• Electronic Throttle Control (ETC) Reset

3.3 Comprehensive System Diagnostics

The scanner performs a complete scan of all major vehicle systems, including Engine, Transmission, ABS, Airbag (SRS), TPMS, 4WD, and Steering. This helps in locating faults and maintaining vehicle performance.

3.4 Universal OBD2 Functionality

The device functions as a universal OBD2 diagnostic tool for all 12V vehicles with a 16-pin port. It can identify the cause of a check engine light, assist with smog tests, monitor live performance data, test battery voltage, and display detailed vehicle information.

4. 차량 보장

The AUTOPHIX 7150P+ is specifically designed for Ford, Lincoln, and Mercury vehicles. Below are examp지원되는 모델 목록:

Note: Vehicle compatibility can vary by specific model year and region. For detailed compatibility, please refer to the official AUTOPHIX website or contact support with your vehicle's make, model, and year.

This image illustrates the primary vehicle brands supported by the AUTOPHIX 7150P+ scanner: Ford, Lincoln, and Mercury.

5. 설정

Follow these steps to set up and begin using your AUTOPHIX 7150P+ OBD2 Scanner:

1. Connect to the Car: Locate your vehicle's OBD2 16-pin diagnostic port, typically found under the dashboard on the driver's side. Plug the scanner's cable firmly into this port. The scanner is plug-and-play and does not require a separate battery.
2. Turn on the Ignition: Turn your vehicle's ignition to the 'ON' position. Do not start the engine unless instructed by a specific diagnostic procedure.
3. 전원 켜기 및 초기화: The scanner will power on automatically once connected to the vehicle's OBD2 port and the ignition is on. It will then perform an initial system check.

This diagram illustrates the three basic steps for connecting and preparing the scanner for use: plugging into the OBD2 port, turning on the ignition, and initiating diagnosis.

6. 사용 설명서

Once the scanner is set up, navigate the menu using the directional buttons and the 'OK' (Enter) and 'ESC' (Back) buttons.

6.1 메인 메뉴 탐색

The main menu provides access to various functions. Use the UP/DOWN arrows to scroll through options and 'OK' to select. 'ESC' returns to the previous screen.

6.2 진단 문제 코드(DTC) 읽기 및 지우기

1. 메인 메뉴에서 선택하세요 'Diagnosis' or 'Read Codes'.
2. Choose the specific Electronic Control Unit (ECU) you wish to scan (e.g., Engine, ABS, SRS).
3. The scanner will display any active or pending DTCs. Note down the codes and their descriptions.
4. After addressing the underlying vehicle issue, return to the diagnostic menu and select 'Erase Codes' to clear the DTCs and turn off the check engine light.

This image illustrates the process of diagnosing and clearing a check engine light, showing the light illuminated and then off.

6.3 View라이브 데이터

'데이터 스트림' 기능을 사용하면 다음을 수행할 수 있습니다. view real-time sensor data from your vehicle's systems. This can be crucial for diagnosing intermittent issues or verifying repairs.

1. 선택하다 'Data Stream' 진단 메뉴에서.
2. 모니터링할 매개변수를 선택하십시오(예: 엔진 RPM, 냉각수 온도, 산소 센서 판독값).
3. 데이터는 숫자 형식 또는 그래프 형식으로 표시됩니다.

6.4 I/M Readiness (Smog Test)

This function checks the status of the vehicle's emission-related monitoring systems to determine if it's ready for an inspection/maintenance (smog) test.

1. 선택하다 'I/M Readiness' 메인메뉴에서.
2. The scanner will display the status of various monitors (e.g., O2 Sensor Monitor, Catalyst Monitor). 'OK' or 'Complete' indicates the monitor has run and passed. 'INC' or 'Not Complete' means the monitor has not yet run.

This image depicts a vehicle being tested for emissions, illustrating the concept of passing or failing a smog test.

7. Maintenance Functions (Service Resets)

The AUTOPHIX 7150P+ offers several specialized maintenance functions. Access these through the 'Service' or 'Special Functions' menu on the device. The availability of specific functions may vary by vehicle model and year.

This image highlights the range of maintenance services, both common and special, that the AUTOPHIX 7150P+ can perform.

7.1 오일 리셋

Resets the oil life reminder or oil change maintenance light in your vehicle after an oil service.

This image visually represents the Electronic Parking Brake (EPB) Reset and Oil Reset functions.

7.2 EPB Reset (Electronic Parking Brake)

Used to recalibrate the EPB system to its default settings after maintenance or repairs involving brake pads or calipers.

7.3 BMS Reset (Battery Management System)

Initializes the new battery and uploads its data to the vehicle's control unit (ECU) after battery replacement.

This image illustrates the BMS Reset and ETC Reset functions, showing a brake system and a throttle body.

7.4 ETC Reset (Electronic Throttle Control)

Restores the electronic throttle control system to its initial default setting, which can resolve issues related to abnormal idle speed and unstable engine performance.

7.5 Reset PCM Learned Values

Resets the Powertrain Control Module (PCM) learned values, allowing the system to re-adapt to the vehicle's current state and address engine and transmission performance issues caused by learning value deviation.

This image depicts the Reset PCM Learned Values and Throttle Learning functions, showing an engine diagram and a throttle body.

7.6 ABS Service Bleed

Expels air from the braking system to ensure brake fluid fills the entire system, maintaining normal braking performance.

This image illustrates the Clear Transmission Adaptive Tables and ABS Service Bleed functions, showing a transmission and a car battery.

7.7 Clear Transmission Adaptive Tables

Adjusts the transmission adaptive table based on driving habits and vehicle conditions. Clearing it enables the transmission to relearn, enhancing shift smoothness and response speed.

7.8 Fuel Injector Correction Factors

Adjusts the fuel injector's spray volume to ensure accurate fuel supply to the engine, optimizing performance and fuel economy.

This image depicts the Fuel Injector Correction Factors and Reset DPF Learned Values functions, showing engine injectors and a catalytic converter.

7.9 Reset DPF Learned Values (Diesel Particulate Filter)

For diesel vehicles, resetting DPF learned values allows the system to re-evaluate the DPF's status, addressing issues like DPF blockage and abnormal regeneration.

8. 소프트웨어 업데이트

The AUTOPHIX 7150P+ scanner includes lifetime free software updates. These updates help maintain broad vehicle coverage and add new car models and functions.

8.1 Update Process

소프트웨어를 업데이트하려면:

1. Download the update tool from the official AUTOPHIX website onto a Windows PC.
2. 제공된 USB 케이블을 사용하여 스캐너를 컴퓨터에 연결합니다.
3. Follow the instructions provided by the update tool to download and install the latest software.

Note: The USB cable is solely for connecting the device to a computer for software updates or printing diagnostic reports. Ensure your PC meets the system requirements for the update tool.

This image symbolizes the lifetime free software updates provided for the device, ensuring continued functionality and compatibility.

9. 사양

10. 문제 해결

If you encounter issues while using your AUTOPHIX 7150P+ scanner, consider the following:

10.1 장치 전원이 켜지지 않음

• Ensure the scanner is firmly connected to the vehicle's OBD2 port.
• 차량의 시동 스위치가 'ON' 위치에 있는지 확인하십시오.
• 차량 배터리 용량을 확인하세요tag예. 스캐너는 차량에서 전원을 공급받습니다.

10.2 통신 오류

• Confirm the vehicle is OBD2 compliant (generally 1996 and newer for US vehicles).
• Ensure the connection to the OBD2 port is secure.
• 차량별 문제인지 확인하기 위해 호환되는 다른 차량에서 스캐너를 사용해 보십시오.

10.3 소프트웨어 업데이트 문제

• Ensure the USB cable is connected directly to a USB port on your computer, not through a USB hub.
• Verify that the update tool is running on a compatible Windows operating system.
• 업데이트 프로세스를 방해할 수 있는 방화벽이나 바이러스 백신 소프트웨어를 일시적으로 비활성화하십시오.
• If issues persist, contact AUTOPHIX technical support.

10.4 Specific Function Not Available

• Not all functions are available for all vehicle models or years, even within the supported brands.
• 스캐너 소프트웨어가 최신 버전인지 확인하십시오.
• Verify compatibility for your specific vehicle's make, model, and year with AUTOPHIX support.

11. 보증 및 지원

The AUTOPHIX 7150P+ OBD2 Scanner comes with a 5년 제조사 보증. For technical assistance, warranty claims, or any product-related inquiries, please contact AUTOPHIX customer support.

연락처 정보:

• 이메일: autophix@163.com
• Amazon Message: Contact the seller directly through your Amazon order history.

Note: Fault codes can only be cleared after the vehicle issue is repaired. This scanner does not repair vehicle issues.