소개
This instruction manual provides essential information for the installation, operation, and maintenance of your Generic Mini PC CPU Fan Replacement, designed for the NiPoGi AM02 Pro Mini PC. Please read this manual carefully before proceeding with installation to ensure proper function and compatibility.
중요 호환성 참고 사항
There are many kinds of fan wiring sequence, and they are incompatible. We need to check the fan wiring sequence.
To ensure compatibility, please send us the front and back of the fan and the interface wiring sequence diagram. This will help verify that the replacement fan's wiring matches your existing fan, preventing potential damage or malfunction.
Image: Generic Mini PC CPU Fan, illustrating the physical appearance and connector for compatibility verification.
설정 및 설치
- 준비: Ensure your NiPoGi AM02 Pro Mini PC is powered off and disconnected from all power sources. Place it on a clean, static-free surface.
- Accessing the Fan: 미니 PC 케이스를 조심스럽게 여세요asing according to the manufacturer's instructions for your specific NiPoGi AM02 Pro model. Refer to your Mini PC's user manual for guidance on opening the case.
- Disconnecting the Old Fan: Gently disconnect the old CPU fan's power cable from the motherboard. Note the orientation and wiring sequence of the connector. Unscrew and remove the old fan from its mounting points.
- 새 팬 설치하기: Position the new Generic Mini PC CPU Fan in the designated area. Secure it with the appropriate screws.
- Connecting the New Fan: Carefully connect the new fan's power cable to the motherboard, ensuring the correct wiring sequence and orientation. Refer to the "Important Compatibility Note" section if you have not already verified the wiring. Incorrect wiring can damage the fan or the Mini PC.
- C를 닫으면서asing: Once the new fan is securely installed and connected, carefully close the Mini PC casing.
- 초기 테스트: Reconnect the power supply to your Mini PC and power it on. Observe the fan to ensure it spins freely and quietly. Check the system's temperature to confirm proper cooling.
작업
The CPU fan operates automatically, controlled by the Mini PC's system to maintain optimal operating temperatures. No manual intervention is typically required for its operation.
- Ensure adequate airflow around your Mini PC to assist the fan in cooling.
- Listen for any unusual noises (e.g., grinding, rattling) that might indicate a problem with the fan.
- Monitor your system's temperature periodically using system monitoring software, if available, to ensure it remains within safe operating limits.
유지
Regular maintenance helps prolong the life of your CPU fan and ensures efficient cooling.
- 먼지 청소: Periodically (e.g., every 3-6 months, depending on environment) power off and unplug your Mini PC. Open the casing and gently clean any accumulated dust from the fan blades and heatsink using compressed air or a soft brush. Hold the fan blades stationary while using compressed air to prevent over-spinning and potential damage.
- 점검: During cleaning, inspect the fan for any signs of wear, damage, or loose connections.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 회전하지 않습니다 |
|
|
| Unusual noise (grinding, rattling) |
|
|
| Mini PC overheating |
|
|
명세서
| 제품 치수 | 3.94 x 3.94 x 3.94 인치 |
| 품목 무게 | 3.52 온스 |
| 제조업체 | 일반적인 |
| ASIN | B0F5NJBH3 |
| 첫 번째 이용 가능 날짜 | 12년 2025월 XNUMX일 |
| 항목 수 | 1 |
보증 정보
As this is a generic replacement part, warranty terms may vary. Please refer to the specific warranty information provided by the seller at the time of purchase. Retain your proof of purchase for any warranty claims.
고객 지원
For further assistance, technical support, or inquiries regarding compatibility, please contact the seller directly through the platform where the product was purchased. Provide your order number and a detailed description of your issue for prompt support.
