FORGING MOUNT HY9112-B 코너형 풀모션 TV 벽걸이 마운트 사용 설명서

1. 서론

This manual provides detailed instructions for the safe and proper installation and operation of your FORGING MOUNT HY9112-B Corner Full Motion TV Wall Mount. This mount is designed to securely hold televisions ranging from 26 to 65 inches, with a maximum weight capacity of 77 lbs (35 kg). It supports VESA mounting patterns up to 400x400mm and offers full motion capabilities including swivel, tilt, and 90-degree rotation for both landscape and portrait view주고받음.

Please read all instructions carefully before beginning installation to ensure safety and optimal performance. If you have any questions, contact FORGING MOUNT customer support.

그림 1: 이상view of the FORGING MOUNT HY9112-B Full Motion TV Wall Mount.

2. 안전 정보

• 중량 용량: 최대 중량 용량은 77파운드(35kg)를 초과하지 마십시오.
• 화면 크기: This mount is compatible with TVs from 26 to 65 inches.
• VESA 호환성: Ensure your TV's VESA pattern is between 100x100mm and 400x400mm.
• 벽 유형: Install only on 16-inch wood stud walls or solid concrete/brick walls. 석고보드에만 설치하지 마십시오.
• 전문적인 설치: 설치 과정에 대해 확신이 없다면 자격을 갖춘 전문가에게 문의하세요.
• 도구: 설치하는 동안 적절한 도구를 사용하고 안전 장비를 착용하세요.

3. 패키지 내용

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact FORGING MOUNT customer service.

• TV Wall Mount Assembly (Main Unit)
• TV 브래킷 (2개)
• 월 플레이트 템플릿
• Mounting Hardware Kit (various screws, washers, spacers for TV and wall mounting)
• 버블 레벨
• 케이블 타이
• 사용 설명서

4. 사양

Figure 2: TV compatibility details including screen size, weight capacity, and VESA patterns.

Figure 3: Detailed VESA mounting pattern ranges. Note: Extension arms are not needed for VESA patterns below 200x200mm.

5. 설치 가이드

This section outlines the steps for mounting your TV. Ensure you have all necessary tools and understand each step before proceeding. This mount is suitable for 16-inch wood stud walls and solid concrete/brick walls. 석고보드에만 설치하지 마십시오.

5.1 설치 전 확인 사항

• Verify your TV's weight and VESA pattern against the specifications.
• Locate suitable mounting points on your wall (wood studs or solid concrete/brick).
• Gather necessary tools: drill, stud finder, level, pencil, measuring tape, screwdriver.

5.2 TV 브래킷을 TV에 부착하기

1. 화면 손상을 방지하기 위해 TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
2. TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
3. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. If your TV's VESA pattern is below 200x200mm, the extension arms on the TV brackets are not required.
4. Attach the two TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened and level.

Figure 4: Illustration of attaching the TV brackets to the television.

5.3 벽면 플레이트 장착

5. Determine the desired height and position for your TV. For corner installations, consider the full range of motion.
6. Use a stud finder to locate the center of two adjacent wood studs (for wood stud installation) or mark drill points for concrete/brick.
7. Position the wall plate template at the desired location and mark the drill holes. Use the included bubble level to ensure it is perfectly horizontal.
8. Drill pilot holes according to the template and wall type.
9. Securely fasten the wall plate of the mount to the wall using the appropriate lag bolts and washers. Ensure it is firmly attached.

Figure 5: Illustration of securing the wall plate to the wall.

5.4 TV 걸기

10. With assistance, carefully lift the TV (with brackets attached) and hook the TV brackets onto the wall plate.
11. TV가 거치대에 단단히 고정되었는지 확인하십시오.
12. TV 브래킷이 실수로 분리되는 것을 방지하기 위해 안전 나사나 잠금 장치를 단단히 조이십시오.

Figure 6: Illustration of hanging the television onto the mounted wall plate.

Figure 7: The mount's design allows for effective corner installation, providing flexible view각도를 나타냅니다.

6. 사용 설명서

Your FORGING MOUNT HY9112-B offers versatile adjustments for optimal view주고받음.

6.1 회전 조절

The mount allows for a +/- 90-degree swivel. Gently push or pull the TV to the desired left or right angle. The full motion arm extends up to 25.6 inches, providing ample range for various viewing positions, including corner applications.

Figure 8: Demonstrates the mount's extension, retraction, and swivel capabilities.

6.2 기울기 조정

눈부심을 줄이고 시청 환경을 최적화하려면 TV의 수직 기울기를 +5도(위쪽)에서 -12도(아래쪽) 사이로 조절하세요. viewing comfort. This adjustment is tool-free.

Figure 9: Illustrates the tilt function for ergonomic view주고받음.

6.3 Landscape to Portrait Rotation

This mount features a 90-degree rotation capability, allowing you to switch your TV between landscape (horizontal) and portrait (vertical) orientations. Gently rotate the screen by hand after installation to achieve the desired display mode.

Figure 10: Shows the TV rotating from landscape to portrait mode.

6.4 레벨 조정

After installation, you can make minor level adjustments of +/- 3 degrees to ensure your TV is perfectly horizontal.

7. 유지관리

• 청소: 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
• 점검: 모든 나사와 연결부를 주기적으로 점검하여 단단히 고정되어 있는지 확인하세요.
• 움직임: 거치대의 움직임이 뻑뻑해지면 관절 부위에 소량의 실리콘계 윤활제를 바르십시오.

8. 문제 해결

• TV가 수평이 아닙니다: Use the post-installation level adjustment feature (+/- 3 degrees) to fine-tune the horizontal position. Recheck wall plate installation if significant tilt persists.
• 마운트가 느슨해진 느낌: Ensure all wall mounting bolts and TV bracket screws are securely tightened. Do not overtighten.
• TV를 옮기는 데 어려움이 있습니다. Check for any obstructions. If joints are stiff, apply a small amount of silicone lubricant. Ensure the TV weight is within the specified limit.
• 부품 누락 또는 손상된 부품: Do not proceed with installation. Contact FORGING MOUNT customer support immediately.

9. 보증 및 지원

FORGING MOUNT is committed to providing high-quality products. For any questions, concerns, or support needs regarding your HY9112-B TV wall mount, please contact FORGING MOUNT customer service. Refer to your product packaging or the FORGING MOUNT web구체적인 보증 세부 사항과 연락처 정보는 해당 사이트를 참조하세요.

제조업체: 단조 마운트