1. 서론
This manual provides essential information for the installation, operation, and maintenance of your new replacement dishwasher drain pump. This pump is designed to restore proper drainage function to your dishwasher and is compatible with a wide range of Bosch and Thermador models, including those listed in the specifications section. Please read these instructions carefully before proceeding with installation or maintenance.
2. 안전 정보
Before attempting any installation or maintenance, ensure the dishwasher's power supply is completely disconnected at the circuit breaker. Failure to do so can result in electric shock or serious injury. Always wear appropriate personal protective equipment, such as gloves and eye protection. If you are unsure about any step, it is recommended to consult a qualified appliance technician.
- 기기를 수리하기 전에 항상 전원을 차단하십시오.
- 식기 세척기에 물 공급을 차단하십시오.
- 보호 장갑과 안경을 착용하십시오.
- Handle sharp edges with caution.
- Ensure all connections are secure and watertight after installation.
- 어린이와 애완동물을 작업 구역에서 멀리 두십시오.
3. 제품 오버view
This replacement drain pump is a critical component responsible for expelling water from your dishwasher tub during and after wash cycles. It features a durable motor and impeller assembly designed for efficient water removal. The pump is engineered to meet or exceed the specifications of the original part, ensuring reliable performance.
그림 1: 전체 view of the replacement dishwasher drain pump, highlighting its compact design and primary components.
포함된 구성 요소
- One (1) Replacement Dishwasher Drain Pump
4. 설정 및 설치
Replacing a dishwasher drain pump typically involves accessing the pump assembly located at the bottom of the dishwasher. This process may vary slightly depending on your specific dishwasher model. Always refer to your dishwasher's service manual for detailed, model-specific instructions. Professional installation is recommended.
그림 2: 측면 view of the drain pump, illustrating its connection points and mounting tabs.
General Installation Steps (Consult your dishwasher's service manual for specifics):
- 전원 분리: Turn off the circuit breaker supplying power to the dishwasher.
- 수도를 잠그세요: 식기세척기의 급수 밸브를 잠그세요.
- 액세스 펌프: Carefully pull the dishwasher out from its cabinet and remove the lower access panel.
- 오래된 펌프를 찾으세요: Identify the existing drain pump assembly.
- 연결 끊기: Disconnect the electrical wiring harness and drain hoses from the old pump. Be prepared for residual water.
- 오래된 펌프 제거: Release any clips or screws securing the old pump and remove it.
- 새 펌프 설치: Position the new drain pump, ensuring it seats correctly. Secure it with clips or screws.
- 연결을 다시 연결하세요: Attach the electrical wiring harness and drain hoses to the new pump. Ensure all hose clamp누출을 방지하기 위해 꼭 조여져 있습니다.
- 패널 교체: Reinstall the lower access panel and slide the dishwasher back into place.
- 시험: Restore water and power. Run a short cycle to check for proper drainage and any leaks.
그림 3: 하단 view of the drain pump, showing the impeller housing and drainage port.
5. 운영
The drain pump operates automatically as part of your dishwasher's wash cycle. When activated, the pump's motor spins the impeller, creating suction to draw water from the dishwasher tub and push it through the drain hose to your household plumbing. Proper operation ensures that dirty water is removed, allowing for clean rinse cycles and preventing standing water in the tub. The pump will engage multiple times throughout a wash cycle, typically after the main wash and rinse phases.
6. 유지관리
To ensure the longevity and efficient operation of your drain pump, periodic inspection is recommended. Check the drain hose for kinks or blockages. Occasionally, food debris or foreign objects may accumulate in the pump's filter or impeller area, which can impede drainage. If accessible, clear any obstructions after disconnecting power to the dishwasher. Do not use harsh chemicals to clean the pump or its surrounding components, as this may cause damage.
그림 4: 상단 view of the drain pump, showing the impeller assembly.
7. 문제 해결
Refer to the table below for common issues related to dishwasher drainage and potential solutions. Always disconnect power before attempting any troubleshooting steps that require accessing internal components.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 식기 세척기에서 물이 빠지지 않음 | Clogged drain hose or air gap | Inspect and clear drain hose/air gap. |
| Clogged pump filter/impeller | Disconnect power, access pump, clear debris. | |
| 배수 펌프에 결함이 있습니다 | 배수 펌프를 교체하십시오. | |
| 배수 사이클 중 이상한 소음이 발생합니다. | 펌프 임펠러의 파편 | Disconnect power, access pump, remove debris. |
| Worn pump motor/bearings | 배수 펌프를 교체하십시오. | |
| 펌프 부분에서 물이 새고 있습니다. | 느슨한 호스 연결 | 호스를 조이세요amps. |
| Damaged pump housing/seal | 배수 펌프를 교체하십시오. |
그림 5: 후면 view of the drain pump, showing the motor housing.
8. 사양
Technical details for the replacement dishwasher drain pump:
| 특징 | 세부 사항 |
|---|---|
| 상표 | 일반적인 |
| 모델 번호 | SHP878WD6N/01 |
| 전원 | 코드식 전기 |
| 포함된 구성 요소 | 배수 펌프 |
| 제조업체 | 일반적인 |
| 패키지 크기 | 1 x 1 x 1 인치 |
| ASIN | B0F3W6CWHZ |
| 첫 번째 이용 가능 날짜 | 6년 2025월 XNUMX일 |
9. 보증 정보
This replacement drain pump is covered by the manufacturer's standard warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or contact the seller directly.
10. 고객 지원
For technical assistance, troubleshooting guidance, or inquiries regarding this product, please contact the seller or manufacturer through the platform where the purchase was made. When contacting support, please have your product model number (SHP878WD6N/01) and purchase details readily available.
