HARDELL 6-Speed Rechargeable Engraving Pen User Manual

1. 서론

Thank you for choosing the HARDELL 6-Speed Rechargeable Engraving Pen. This versatile electric engraving tool is designed for precision work across a wide range of materials, making it ideal for artists, DIY enthusiasts, and hobbyists. Its cordless design and variable speed settings provide flexibility and control for various engraving, carving, and polishing tasks.

패키지 내용

모든 품목이 들어 있는지 확인하려면 패키지를 확인하세요.

• 1 x HARDELL Engraving Pen
• 41 x Accessories (including Diamond Bits, Polish Bits, Sanding Paper Discs & Rod, Stencils, Replacement Screws)
• 1 x Type-C 충전 케이블
• 1 x 렌치
• 1 x 육각 렌치
• 1 x 사용자 설명서

Image: The HARDELL Engraving Pen and its complete set of 41 accessories, including various bits, stencils, and charging cable.

2. 중요 안전 지침

To ensure safe operation and prevent injury or damage, please read and follow these safety guidelines carefully:

• 눈 보호: 날아오는 파편으로부터 눈을 보호하기 위해 항상 안전 안경이나 고글을 착용하세요.
• 작업 영역: Ensure your work area is well-lit and clean. Avoid operating in damp 또는 습한 환경.
• 통풍: Work in a well-ventilated area, especially when engraving materials that may produce dust or fumes.
• 안전한 작업물: Always secure the material you are working on to prevent it from moving during engraving.
• 명확하게 유지: 회전하는 부품에 손, 머리카락, 헐렁한 옷을 가까이 두지 마세요.
• 어린이와 애완동물: 어린이와 반려동물의 손이 닿지 않는 곳에 보관하십시오.
• Proper Bits: Use only bits designed for the HARDELL Engraving Pen and suitable for the material being worked on.
• 충전 중: Use the provided Type-C charging cable. Do not attempt to charge with damaged cables or chargers.
• 저장: Store the tool in a dry, secure place when not in use.
• 유지: Do not attempt to disassemble or repair the tool yourself. Contact customer support for assistance.

3. 설정 및 충전

초기 충전

Before first use, fully charge the engraving pen. The device features a 2000mAh rechargeable battery and supports USB-C fast charging.

1. Connect the provided Type-C charging cable to the charging port on the engraving pen.
2. Plug the other end of the cable into a compatible USB power source (e.g., wall adapter, computer, power bank).
3. The LED display will indicate charging status. A full charge typically takes approximately 2 hours, providing up to 2 hours of uninterrupted use.

Image: The HARDELL Engraving Pen highlighting its Type-C charging port, compatible with portable batteries, computers, charging heads, and car chargers.

Installing Engraving Bits

The HARDELL Engraving Pen uses a chuck system for securing bits. Ensure the device is turned off before changing bits.

1. Loosen the Screw: Use the provided hex key to loosen the small screw on the chuck at the tip of the pen. (Additional screws are included in the accessory kit).
2. 비트 삽입: Carefully insert the desired engraving bit into the chuck. Ensure it is seated firmly and straight.
3. 나사를 조이세요: Securely tighten the screw with the hex key to hold the bit in place. Do not overtighten.

Image: A visual guide demonstrating the three steps for installing an engraving bit: loosen the screw, insert the bit, and tighten the screw.

4. 사용 설명서

전원 켜기/끄기 및 속도 조정

The engraving pen features an On/Off button and speed adjustment controls.

1. 전원 켜기: Press and hold the On/Off button for a few seconds until the LED display illuminates.
2. 속도 조정: Briefly press the On/Off/Adjust Speed button to cycle through the 6 available speed settings (18,000 RPM to 38,000 RPM). The current speed level will be shown on the LCD display.
3. 전원 끄기 : Press and hold the On/Off button again until the display turns off.

Engraving Techniques and Material Versatility

The HARDELL Engraving Pen is suitable for a wide range of materials. Select the appropriate bit and speed for your task.

• Low Speeds (Level 1-2, 18,000-22,000 RPM): Ideal for delicate tasks such as nail polishing, fine crystal carving, or working on softer materials.
• Medium Speeds (Level 3-4, 26,000-30,000 RPM): Suitable for general polishing, rust removal, and engraving on materials like plastic or softer woods.
• High Speeds (Level 5-6, 34,000-38,000 RPM): Best for general drilling, wood chiseling, and engraving harder materials such as metal, glass, stone, or ceramic.

Image: The HARDELL Engraving Pen demonstrating its 6 adjustable speed levels, from 18,000 RPM for nail polishing to 38,000 RPM for wood chiseling.

이미지: 콜라주 쇼asing the HARDELL Engraving Pen's capability to engrave on over 50 surfaces, including stone, glass, plastic, ceramic, eggshells, wood, gemstones, and metal.

데모 영상

Watch this video for a visual guide on the HARDELL Engraving Pen's features and various applications.

5. 유지관리

청소

• Always ensure the tool is turned off and disconnected from any power source before cleaning.
• Use a soft, dry cloth to wipe down the body of the engraving pen.
• Remove any dust or debris from the chuck and bit area using a small brush or compressed air.
• Clean engraving bits after each use to maintain their sharpness and effectiveness.

저장

• Store the engraving pen and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures.
• Keep the tool in its original packaging or a protective case to prevent damage.
• 배터리 수명을 연장하려면 장기간 보관하기 전에 배터리가 부분적으로(약 50%) 충전되어 있는지 확인하세요.

6. 문제 해결

7. 사양

이미지: 내부 view of the HARDELL Engraving Pen, emphasizing its 38,000 RPM high-speed rotation, stable operation at high speeds, and ability to maintain a lower body temperature.

Image: The HARDELL Engraving Pen alongside its packaging, emphasizing its 4V brushless motor for longer life and reduced accessory costs.

8. 보증 및 지원

제조업체 보증

The HARDELL Engraving Pen comes with a 1년 제조업체 보증 구매일로부터 적용됩니다. 이 보증은 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 단, 오용, 사고, 무단 수리 또는 정상적인 마모로 인한 손상은 보증 대상에서 제외됩니다.

고객 지원

If you encounter any issues with your HARDELL Engraving Pen or have questions not addressed in this manual, please contact HARDELL customer support. Have your model number (DKB42501SILHD-1) and purchase information ready for faster service.

For the most up-to-date support information, please visit the official HARDELL website or refer to your purchase platform.