소개
This manual provides essential instructions for the safe and efficient operation of your Sonew Jet Dryer Blower. Please read this manual thoroughly before use and retain it for future reference. This device is designed for various drying and clearing tasks, offering powerful performance in a compact form factor.
안전 정보
To ensure safe operation and prevent damage to the device or injury, observe the following precautions:
- Double Overheat Prevention: The device is equipped with internal sensors to prevent overheating. Do not block air vents during operation.
- Current Prevention: Built-in mechanisms protect against excessive current.
- 단락 방지: Designed with safeguards against short circuits.
- 능동 냉각 시스템: The blower utilizes an active cooling system for reliability during extended use.
- Keep hands, hair, and loose clothing away from the air intake and exhaust ports during operation.
- 습기가 많은 환경이나 인화성 액체 또는 가스 근처에서 작동하지 마십시오.
- Use only the provided charging cable. Ensure the power adapter (not included) meets the 20W charging specification.
- Store the device in a dry, cool place, away from direct sunlight and extreme temperatures, when not in use.
- 이 장치는 장난감이 아닙니다. 어린이의 손이 닿지 않는 곳에 보관.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Sonew Jet Dryer Blower
- 1 x 데이터 케이블
- 2 x Instruction Cards (This manual provides comprehensive details)
설정
The Sonew Jet Dryer Blower comes pre-assembled and ready for use after charging. No additional assembly is required.
충전 지침
- Connect the provided data cable to the charging port located on the blower's handle.
- Connect the other end of the data cable to a compatible 20W USB power adapter (not included) or a suitable USB power source.
- The charging indicator light will display 빨간색 장치가 충전되는 동안.
- When the battery is fully charged, the indicator light will turn 파란색.
- 일반적으로 완전 충전에는 약 2시간이 걸립니다.
Note: For optimal battery performance and longevity, it is recommended to fully charge the device before its first use.
작동 지침
전원 켜기/끄기
- To power on the blower, press and hold the power button located on the handle until the fan starts.
- To power off, press and hold the power button again until the fan stops completely.
용법
The Jet Dryer Blower is designed for a variety of applications due to its powerful and focused airflow:
- Vehicle Drying: Efficiently dry vehicle surfaces after washing, preventing water spots.
- 먼지 제거: Clear dust and debris from electronics, workshops, keyboards, or other hard-to-reach areas.
- 야외 사용: Suitable for clearing light snow, leaves, or assisting with campfire ignition.
- Camping/Picnic: Useful for various drying or clearing tasks in outdoor settings.
Direct the nozzle towards the area requiring airflow. Maintain a safe distance from delicate surfaces to avoid damage.
유지
Regular maintenance ensures the longevity and optimal performance of your blower:
- 청소: Wipe the exterior of the blower with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- 통풍구: Periodically check and clear any dust or debris from the air intake and exhaust vents to ensure unrestricted airflow and prevent overheating. Use a soft brush or compressed air if necessary.
- 저장: Store the blower in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) if storing for extended periods.
문제 해결
If you encounter issues with your Sonew Jet Dryer Blower, refer to the table below for common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 송풍기가 작동하지 않습니다. | 배터리가 부족하거나 충전되지 않았습니다. | Charge the device fully. Ensure the power button is pressed and held for a few seconds. |
| Reduced airflow or weak performance. | Blocked air intake/exhaust vents. Low battery. | Clear any debris from the vents. Recharge the device. |
| 충전 표시등이 켜지지 않습니다. | 충전 케이블이나 전원에 결함이 있습니다. | Try a different USB cable or a known-good 20W power adapter. Ensure connections are secure. |
| Device gets excessively hot. | Blocked vents or prolonged heavy use. | Stop use immediately. Clear vents. Allow device to cool down before resuming operation. If problem persists, contact support. |
명세서
- 재료: 탄소 섬유 복합 재료
- 배터리 유형: Lithium Battery, 4000mAh
- 힘: 650와트
- 풍속: 240km/h
- 추력: 1400g
- 충전 전력: 20와트
- 정격 볼륨tage: 16.8V
- 현재의: 80A
- Heat Dissipation Mode: Active Heat Dissipation
- 안전 기능: Double Overheat Prevention, Current Prevention, Short Circuit Prevention
- 완전 충전 시간: 약 2시간
- 품목 무게: Approximately 400g (device only)
- 패키지 무게: 약 888g
- 치수(대략): 191mm (Height) x 107mm (Width) x 85mm (Nozzle Diameter)
제품 이미지
보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your original purchase documentation. You may also visit the official Sonew web추가 지원은 사이트를 참조하십시오. 보증 청구에 대비하여 구매 증빙 자료로 구매 영수증을 보관하십시오.