SYNCO XVision HD 무선 비디오 전송 시스템(송신 1, 수신 2) 사용 설명서

1. 제품 오버view

The SYNCO XVision HD Wireless Video Transmission System provides high-definition video transmission for professional film, television, and live streaming applications. This system, configured with one transmitter (TX) and two receivers (RX), supports 1080P/60fps video with a range of up to 300 meters and ultra-low latency of 40ms. Its compact design and flexible power options make it suitable for various production environments.

주요 특징:

• Stable HD Video Transmission: Supports 1080P/60fps video up to 300 meters with SYNCO's ultra-penetration technology.
• 초저 대기 시간: 40ms latency for real-time monitoring and feedback, utilizing advanced H.265/HEVC encoding.
• Dual HDMI Connectivity: Features HDMI input, HDMI output, and HDMI loop-out ports for versatile connections.
• 다중 사용자 모니터링: Supports simultaneous transmission to multiple receivers (up to four) for collaborative workflows.
• 소형 및 휴대성: Lightweight at 119g with foldable antennas, designed for easy transport and on-the-go use.
• 유연한 전원 옵션: Compatible with NP-F batteries and USB-C 5V input.
• SYNCO Link App: Companion app for real-time monitoring, image adjustments (zebra lines, mirroring, false color), video saving, screenshots, and playback.

상자 안에 무엇이 들어있나요?

• 송신기(TX) 1개
• 수신기(RX) 2개
• C 형 케이블 x 3

2. 구성 요소 및 제어

Each unit (Transmitter and Receiver) features a compact design with essential ports and controls for efficient operation.

Transmitter (TX) Unit:

• HDMI 입력 : Connects to the video source (e.g., camera, computer).
• HDMI 출력 : Provides a loop-out signal to a local monitor.
• USB-C 5V IN: 전원 입력 포트.
• 온 / 오프 스위치: 장치의 전원을 켜거나 끕니다.
• 페어링 버튼: Initiates pairing with receiver units.
• NP-F 배터리 슬롯: For external battery power.
• 디스플레이 화면: Shows status information like resolution, frame rate, signal strength, and battery level.

Receiver (RX) Unit:

• HDMI 출력 : Connects to a display device (e.g., monitor, TV, projector).
• USB-C 5V IN: 전원 입력 포트.
• 온 / 오프 스위치: 장치의 전원을 켜거나 끕니다.
• 페어링 버튼: Initiates pairing with the transmitter unit.
• NP-F 배터리 슬롯: For external battery power.
• 디스플레이 화면: Shows status information like resolution, frame rate, signal strength, and battery level.

3. 설정

3.1 장치 전원 켜기

1. 배터리 설치: If using NP-F batteries, insert a charged battery into the NP-F battery slot on both the TX and RX units.
2. USB-C 전원: Alternatively, connect the provided Type-C cables to the USB-C 5V IN port on both the TX and RX units and plug them into a power source (e.g., USB wall adapter, power bank).
3. 전원 켜기: Slide the ON/OFF switch to the 'ON' position for both the transmitter and receiver units. The display screens will illuminate.

3.2 비디오 장치 연결

1. 송신기 연결: Connect your video source (e.g., camera, computer, game console) to the HDMI IN port of the TX unit using an HDMI cable.
2. 수신기 연결: Connect your display device (e.g., monitor, HDTV, projector) to the HDMI OUT port of each RX unit using an HDMI cable.
3. HDMI Loop-Out (Optional): If you require a local monitor at the transmitter end, connect an HDMI cable from the HDMI OUT port of the TX unit to your local monitor.

3.3 송신기와 수신기 페어링

The units are typically pre-paired from the factory. If re-pairing is necessary or if adding additional receivers, follow these steps:

1. TX 및 RX 장치의 전원이 모두 켜져 있는지 확인하십시오.
2. Press and hold the PAIR button on the TX unit until the display indicates pairing mode.
3. Within a few seconds, press and hold the PAIR button on each RX unit you wish to pair.
4. The units will automatically connect. The display screens will show a successful connection status (e.g., signal strength indicator).

4. 사용 설명서

4.1 기본 작업

• Once powered on and connected, the system will automatically begin transmitting video.
• Monitor the display screens on both TX and RX units for signal strength, battery status, and video resolution/frame rate.
• Ensure antennas are unfolded and positioned for optimal signal reception.

4.2 Using the HDMI Loop-Out

The HDMI OUT port on the transmitter allows for local monitoring without signal delay. Connect an HDMI cable from the TX unit's HDMI OUT to a monitor near your camera setup. This is useful for camera operators who need to see the video feed directly from the source while it is also being transmitted wirelessly.

4.3 SYNCO Link App

The SYNCO Link App enhances the system's capabilities by providing advanced monitoring and control features. Download the app from your device's app store.

1. 앱에 연결: Ensure your mobile device is connected to the Wi-Fi network broadcast by the XVision HD system (refer to the unit's display for Wi-Fi name and password, if applicable).
2. 실시간 모니터링: View the live video feed on your mobile device.
3. 이미지 조정 : Utilize tools such as zebra lines, mirroring, and false color for precise visual control and exposure analysis.
4. 캡처 및 재view: The app supports built-in video saving, screenshots, and instant playback of captured moments.

5. 유지관리

5.1 청소

• 제품 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오.
• 액체 세척제, 용제 또는 연마제를 사용하지 마십시오. 이러한 물질은 마감재나 내부 부품을 손상시킬 수 있습니다.
• 포트에 먼지나 이물질이 없도록 하세요.

5.2 배터리 관리

• Always use recommended NP-F type batteries.
• Remove batteries if the units will not be used for an extended period.
• 배터리를 서늘하고 건조한 곳에 보관하십시오.

5.3 보관

• Store the units in a dry, dust-free environment.
• 극단적인 온도와 습도를 피하십시오.
• When storing, ensure antennas are folded to prevent damage.

6. 문제 해결

If you encounter issues with your SYNCO XVision HD system, refer to the following common problems and solutions:

7. 사양

8. 보증 및 지원

For warranty information, please refer to the official SYNCO website or the warranty card included with your product. For technical support, product registration, or further inquiries, please visit the SYNCO support page or contact their customer service directly.

온라인 리소스:

• SYNCO Official Web대지: www.syncaudio.com
• SYNCO Store on Amazon: Visit the SYNCO Store