소개
This manual provides essential instructions for the proper use and care of your Lamshaw Magnetic Replacement Charger, designed specifically for SANOTO DG08-H Bone Conduction Headphones. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
설정
To set up your magnetic charger, follow these simple steps:
- 충전기 풀기: Carefully remove the magnetic charging cable from its packaging.
- 전원에 연결: Insert the USB-A end of the charging cable into a compatible USB power adapter (not included), a computer USB port, or a power bank. Ensure the power source provides 5 Volts output.
- Prepare Headphones: Locate the charging port on your SANOTO DG08-H Bone Conduction Headphones.
- 자기 연결: Bring the magnetic charging head close to the charging port of your headphones. The magnets will automatically align and snap into place, establishing a secure connection.
Image: The magnetic charging head automatically aligns and connects to the charging port of the SANOTO DG08-H Bone Conduction Headphones, ensuring a stable connection.
작동 지침
Using your Lamshaw magnetic charger is straightforward:
- 충전 시작: Once the magnetic connection is established and the USB end is connected to a power source, your headphones will begin charging. Refer to your headphone's indicator lights for charging status.
- 안전한 충전: The charger features a built-in smart IC chip and multi-protection systems to prevent over-charge, short-circuit, and temperature issues, ensuring safe and efficient charging for your device.
- 휴대성: The compact and flexible design of the charging cable makes it easy to carry. It is suitable for use at home, in the office, during travel, or in your car.
Image: The charger's portable design allows for convenient use in various environments such as home, office, travel, and car.
Image: The charger incorporates a built-in smart IC and multi-protection systems to ensure safe charging, guarding against over-charge, short-circuits, and excessive temperatures.
유지
To ensure the longevity and optimal performance of your Lamshaw magnetic charger, follow these maintenance guidelines:
- 깨끗하게 유지하십시오: Regularly wipe the magnetic contacts and cable with a dry, soft cloth to remove dust or debris. Avoid using liquids or abrasive cleaners.
- 적절한 보관: When not in use, store the cable in a cool, dry place. The flexible PVC cable is designed for easy rolling and storage.
- 극심한 굽힘을 피하세요: While the cable is designed for durability and has undergone bend tests (6000+), avoid sharp or excessive bending to prevent internal damage.
- 손상 여부 검사: 케이블과 커넥터에 마모, 닳음 또는 손상 흔적이 있는지 주기적으로 점검하십시오. 손상이 발견되면 사용을 중단하십시오.
Image: The charger features a reinforced design with multi-layer shielding for stability, a flexible PVC cable for easy handling, and pure copper probes for rapid and stable conduction.
이미지: 자세한 view of the magnetic connector highlights the N52 strong magnets for secure attachment and the pure copper material used for efficient power transfer.
Image: The cable has undergone extensive bend testing (over 6000 cycles at 180 degrees) to ensure its durability and resistance to rupture.
문제 해결
충전기 사용 중 문제가 발생하면 다음의 일반적인 해결 방법을 참조하십시오.
- 헤드폰이 충전되지 않음:
- Ensure the USB-A end is securely plugged into a working power source.
- Verify that the magnetic charging head is properly aligned and connected to your headphones. The magnets should snap firmly into place.
- 다른 USB 전원 어댑터나 USB 포트를 사용해 보세요.
- Check if your headphones are functioning correctly with their original charger (if available).
- 느린 충전:
- Ensure your power source provides sufficient output (5 Volts, 1 Amp 권장).
- Clean the magnetic contacts on both the charger and headphones to ensure optimal conductivity.
- 자석 연결 문제:
- Ensure there is no debris or obstruction between the magnetic contacts.
- The charger uses N52 strong magnets for a secure connection; if the connection feels weak, inspect for damage.
문제가 지속되면 고객 지원팀에 문의하세요.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | Lamshaw |
| 호환 모델 | SANOTO DG08-H Bone Conduction Headphones |
| 입력 Voltage | 5 볼트 |
| 출력 볼륨tage | 5 볼트 |
| 출력 전류 | 1 Amps |
| 케이블 길이 | 3.93 feet / 100 cm |
| 커넥터 유형 | Magnetic (to headphones), USB-A (to power source) |
| 보호 기능 | Over-Charge Protection, Short-Circuit Protection, Temperature Protection |
| 재료 | ABS+PC, Flexible PVC Cable, Pure Copper Probes |
Image: This diagram illustrates the magnetic contact points, the flexible PVC cable material, and the total cable length of 3.93 feet (100 cm).
제조업체 연락처 정보
추가적인 도움이나 문의 사항이 있으시면 제조사에 연락하십시오.
제조업체: Lamshaw
연락처 정보: Lamshaw (as per product details)
구매 문서나 소매업체의 설명서를 참조하십시오. website for specific warranty terms and conditions, as these may vary.