1. 이상view
The KYORITSU AC Clamp Meter 2002PA is a versatile electrical measuring instrument designed for accurate measurement of AC current up to 2000A. It features a large teardrop-shaped core for easy clamping around conductors, a recorder output terminal, and multiple functions including AC/DC voltage, resistance, and continuity testing. This manual provides essential information for safe and effective use of the device.
Figure 1: KYORITSU AC Clamp Meter 2002PA
This image shows the KYORITSU AC Clamp Meter 2002PA, a black handheld device with a red clamp jaw at the top. The display shows "000" and there are several buttons below it. The device is designed for measuring electrical current without direct contact.
2. 안전 정보
Always read and understand this instruction manual before using the KYORITSU AC Clamp Meter 2002PA. Failure to follow safety instructions may result in electric shock, fire, or damage to the device. This product complies with IEC 61010-1, IEC 61010-031, IEC 61010-2-032, and IEC 61326-1 standards.
- 하지 마세요 use the meter if it appears damaged or is operating abnormally.
- 하지 마세요 적용 권tage or current exceeding the maximum rated values.
- 작동 전에 배터리 덮개가 제대로 닫혀 있는지 확인하십시오.
- Always wear appropriate personal protective equipment (PPE) when working with electrical circuits.
- 하지 마세요 use the meter in wet environments or during electrical storms.
- Refer to local and national safety codes for proper electrical work procedures.
3. 주요 특징
- Large Teardrop Core: 간편한 접근을 가능하게 합니다amping around thick conductors.
- 고전류 측정: Capable of measuring large AC currents up to 2000A.
- 다기능: Measures AC current, AC voltag전자, DC 권tage, 저항 및 연속성.
- Recorder Output Terminal: Allows connection to external recording devices.
- 고해상도: Features a small resolution of 0.1A for precise measurements.
- Data Hold & Peak Hold: For capturing stable or peak readings.
- 자동 전원 절약: Extends battery life by automatically turning off after a period of inactivity.
4. 설정
4.1 배터리 설치
- 측정기 뒷면에서 배터리 덮개를 찾으세요.
- Use a screwdriver (if required) to open the battery compartment.
- Insert two AA (R6P, 1.5V) batteries, ensuring correct polarity.
- 배터리함 덮개를 다시 씌우고 단단히 고정하십시오.
4.2 Connecting Test Leads (for Voltage/저항/연속성)
- Insert the red test lead into the VΩ terminal.
- 검정색 테스트 리드를 COM 단자에 삽입하십시오.
- Ensure connections are secure before taking measurements.
5. 사용 설명서
5.1 교류 전류 측정
- Turn the rotary switch to the "ACA" position.
- cl을 열어라amp 레버를 눌러 턱을 움직입니다.
- 측정할 회로의 도체 중 하나만 클라 내부에 가두십시오.amp 턱.
- Release the lever to close the clamp 턱이 도체를 단단히 감싸도록 합니다.
- Read the AC current value displayed on the LCD.
5.2 AC Vol 측정tage
- Turn the rotary switch to the "ACV" position.
- Connect the test leads across the circuit points where voltage를 측정해야 합니다.
- AC 권 읽기tage 값이 LCD에 표시됩니다.
5.3 DC Vol 측정tage
- Turn the rotary switch to the "DCV" position.
- Connect the test leads across the circuit points where voltage is to be measured, observing polarity.
- DC 볼륨 읽기tage 값이 LCD에 표시됩니다.
5.4 저항 측정
- 회전 스위치를 "Ω" 위치로 돌리십시오.
- 저항을 측정하기 전에 회로의 전원이 차단되었는지 확인하십시오.
- 측정할 부품 또는 회로 경로에 테스트 리드를 연결하십시오.
- LCD에 표시된 저항값을 읽으십시오.
5.5 연속성 테스트
- Turn the rotary switch to the "Continuity" position (often indicated by a speaker icon).
- 회로의 전원이 꺼졌는지 확인하세요.
- Connect the test leads across the component or circuit path.
- If continuity exists (resistance below approximately 50±35Ω), the buzzer will sound.
6. 유지관리
6.1 청소
- Wipe the meter with a soft, dry cloth.
- 하지 마세요 연마제 또는 용제를 사용하십시오.
6.2 배터리 교체
- 디스플레이에 배터리 표시등이 나타나면 4.1절에 설명된 대로 배터리를 교체하십시오.
- Remove batteries if the meter will not be used for an extended period to prevent leakage.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 없거나 어둡습니다 | 배터리 잔량이 부족하거나 배터리가 잘못 설치되었습니다. | 배터리를 교체하거나 극성을 확인하세요. |
| 부정확한 판독 | Incorrect function selected, poor test lead contact, or external magnetic fields. | Verify function, ensure good contact, move away from strong magnetic sources. |
| 연속성 경고음이 없습니다. | Circuit is open, or resistance is too high. | Check circuit for breaks, ensure circuit is de-energized. |
8. 사양
Figure 2: Detailed specifications for KYORITSU AC Clamp Meter 2002PA and 2002R (RMS).
This image displays a table of detailed specifications for the KYORITSU AC Clamp Meter models 2002PA and 2002R. It includes measurement ranges and accuracies for AC current, AC voltag전자, DC 권tage, resistance, and continuity, along with physical dimensions, power source, and compliance standards.
| 매개변수 | Specification (Model 2002PA) |
|---|---|
| AC 전류(50/60Hz) | 400.0/2000A ±1%rdg±3dgt (0-400A) ±1%rdg±3dgt (0-1500A) ±3%rdg (1501-2000A) |
| AC Current (40Hz-1kHz) | ±2%rdg±3dgt (0-400A) ±3%rdg±3dgt (0-1500A) |
| AC 볼륨tage | 40.00/400.0/750V ±1%rdg±2dgt(50/60Hz) ±1.5%rdg±3dgt (40Hz-1kHz) |
| DC 볼륨tage | 40.00/400.0/1000V ± 1 % rdg ± 2dgt |
| 저항 | 400.0Ω/4.000/40.00/400.0kΩ ± 1.5 % rdg ± 2dgt |
| 연속성 | 400.0Ω (Buzzer sounds below 50±35Ω) |
| 크레스트 팩터 | 3 or less (Accuracy +1% for 45-65Hz) Peak value AC3000A/1200V or less |
| Max. Measurable Conductor Diameter | 직경 55mm |
| 산출 | Recorder output: DC400mV for AC400A, DC200mV for AC2000A |
| 준수 표준 | IEC 61010-1 (JIS C 1010-1) CAT.III 600V, CAT.II 1000V IEC 61010-031 (JIS C 1010-31) IEC 61010-2-032 (JIS C 1010-2-32) 국제전기기술자협회(IEC) 61326-1 |
| 전원 | 2 x AA batteries (R6P, 1.5V) |
| 연속 사용 시간 | Approx. 150 hours (Auto power save approx. 10 min) |
| 치수 (L x W x D) | 247 x 105 x 49mm |
| 무게 | 약. 470g (배터리 포함) |
| 포함된 액세서리 | Test leads (7107A), Output plug (8201), Carrying case (9094), 2 x AA batteries (R6P), Instruction manual |
| 옵션 액세서리 | Multi-trans (8008) |
9. 보증 및 지원
For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official KYORITSU web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
